JBL GO2 - Waterproof Ultra Portable Bluetooth Speaker - Red

Introduction

The JBL GO2 is a full-featured waterproof Bluetooth speaker designed for portability and robust audio performance. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your JBL GO2 speaker.

Key features include:

• Wireless Bluetooth Streaming
• Up to 5 hours of playtime
• IPX7 waterproof rating
• Built-in speakerphone with noise-cancelling
• Audio Cable Input for wired connections

What's in the Box

Upon unpacking your JBL GO2, please ensure all items are present:

• JBL GO2 Speaker (Red)
• Micro USB Cable (for charging)
• Quick Start Guide

Image: Front view of the JBL GO2 speaker in red, showcasing its compact design and JBL logo on the grille.

Setup

1. Charging the Battery

Before initial use, fully charge the JBL GO2 speaker. Connect the supplied Micro USB cable to the charging port on the side of the speaker and the other end to a USB power adapter (not included) or a computer's USB port.

Image: Side view of the JBL GO2 speaker, revealing the Micro USB charging port and the 3.5mm audio input port, both protected by a waterproof flap.

The LED indicator will show charging status. A full charge typically takes approximately 5 hours. The speaker is equipped with a 730 mAh Lithium Polymer battery.

2. Powering On/Off

Press the power button located on the top panel of the speaker to turn it on or off.

3. Bluetooth Pairing

1. Turn on the JBL GO2 speaker. It will automatically enter Bluetooth pairing mode if no device is currently connected. The LED indicator will flash blue.
2. On your smartphone or tablet, navigate to the Bluetooth settings.
3. Select "JBL GO2" from the list of available devices.
4. Once connected, the LED indicator will turn solid blue, and you will hear an audible confirmation tone.

Image: A red JBL GO2 speaker positioned next to a smartphone, illustrating the wireless Bluetooth connection for audio playback.

The Bluetooth range is approximately 10 meters (33 feet).

4. Using the Audio Cable Input

For devices without Bluetooth, or if you prefer a wired connection, you can use a 3.5mm audio cable (not included). Connect one end of the cable to the AUX-in port on the side of the JBL GO2 and the other end to your audio source's headphone jack.

Operating the Speaker

Controls Overview

Image: Top view of the JBL GO2 speaker, showing the control buttons for power, Bluetooth pairing, volume up/down, and play/pause/speakerphone.

• Power Button: Turns the speaker on or off.
• Bluetooth Button: Initiates Bluetooth pairing mode.
• Volume Down (-): Decreases the volume.
• Volume Up (+): Increases the volume.
• Play/Pause/Speakerphone Button:
• Press once to play or pause music.
• Press twice to skip to the next track.
• Press once to answer or end a call.
• Press and hold to reject an incoming call.

Speakerphone Functionality

The JBL GO2 features a built-in noise-cancelling speakerphone. When a call comes in while connected via Bluetooth, music playback will pause, and you can answer the call using the Play/Pause/Speakerphone button. Speak directly into the speaker for clear communication.

Waterproof Usage (IPX7)

The JBL GO2 is IPX7 waterproof, meaning it can be submerged in water up to 1 meter (3 feet) for up to 30 minutes. Ensure the charging port and AUX-in port cover is securely closed before exposing the speaker to water. This feature makes it suitable for use by the pool, at the beach, or in the shower.

Maintenance

Cleaning

To clean the speaker, use a soft, damp cloth. Do not use harsh chemicals or abrasive materials, as these may damage the finish or internal components. Ensure the speaker is dry before charging.

Storage

Store the JBL GO2 in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, charge the battery to approximately 50% every few months to maintain battery health.

Battery Care

To maximize the lifespan of the integrated Lithium Polymer battery, avoid fully discharging it frequently. Regular charging and avoiding prolonged exposure to high temperatures will help preserve battery performance.

Troubleshooting

• No Power: Ensure the speaker is charged. Connect it to a power source using the Micro USB cable.
• No Sound:
  • Check the volume level on both the speaker and your connected device.
  • Ensure the speaker is properly paired via Bluetooth or connected via the audio cable.
  • If using Bluetooth, try unpairing and re-pairing the device.
• Bluetooth Pairing Issues:
  • Make sure the speaker is in pairing mode (flashing blue LED).
  • Ensure your device's Bluetooth is enabled and within range (10 meters).
  • Turn off and on both the speaker and your device, then try pairing again.
  • Clear the JBL GO2 from your device's Bluetooth history and re-scan.
• Poor Sound Quality:
  • Move the speaker closer to your Bluetooth device to reduce interference.
  • Ensure there are no obstructions between the speaker and the device.
  • If using a wired connection, try a different 3.5mm audio cable.

Specifications

Warranty

The JBL GO2 comes with a Limited Warranty. Please refer to the warranty card included in your product packaging or visit the official JBL website for detailed terms and conditions regarding warranty coverage and duration.

Support

For further assistance, technical support, or service inquiries, please visit the official JBL support website or contact their customer service department. Contact information can typically be found on the JBL website or in the product's quick start guide.