AutoFull C2 Ergonomic Gaming Chair User Manual

1. Safety Information

For safe use, ensure the chair is properly assembled according to the instructions. Do not exceed the maximum weight capacity of 300 pounds. Use caution when adjusting the armrests and reclining backrest.

2. Product Overview

The AutoFull C2 Gaming Chair is designed for comfort and support during extended periods of use. It features an ergonomic design with a wingless cushion, PU leather upholstery, a footrest, and a lumbar support pillow.

Figure 1: AutoFull C2 Gaming Chair (Pink)

This image displays the complete AutoFull C2 Gaming Chair in pink and white, showcasing its ergonomic shape, headrest, and lumbar pillow.

3. Accessory List

Before beginning assembly, ensure all components are present:

• Base
• Cover of the recliner adjuster
• Tilt Mechanism
• Seat Cushion
• Backrest
• Armrest (2)
• Chair Wheel (5)
• Head Pillow
• Lumbar Pillow
• Cylinder
• Cylinder Cover
• Bunny Ear (headband)
• Bunny Tail
• Screw A (2)
• Wrench B (1)

Figure 2: Chair Dimensions

This image provides detailed measurements of the AutoFull C2 Gaming Chair, including seat width, depth, backrest height, and armrest height.

4. Setup and Installation

Assembly is estimated to take approximately 10-15 minutes. Follow these steps carefully:

1. Assemble the Base:
   • Put the base upside down.
   • Insert the five chair wheels into the base.
   • Insert the cylinder vertically into the middle hole of the base.
   • Place the cylinder cover on the cylinder.
2. Attach the Backrest to the Seat Cushion:
   • Place the backrest next to the seat cushion as shown in the video.
   • Unscrew the backrest screws from the seat cushion.
   • Install the screws on the right side of the backrest first, screwing the right two screws into the backrest (whose length is one-third of the screws).
   • Install the left screws in the same manner.
   • Finally, tighten all four screws on both sides.
3. Install the Armrests:
   • Unscrew the armrest screws from the seat cushion.
   • Install the left armrest first (note: there are left and right signs on the armrest). Align the holes and tighten the screws.
   • Repeat for the right armrest.
4. Install the Tilt Mechanism:
   • Unscrew the tilt mechanism screws from the bottom of the seat cushion.
   • Install the tilt mechanism, ensuring the cylindrical knob with one end facing down is close to the armrest. Align the holes and tighten the screws.
5. Connect Seat Assembly to Base:
   • Insert the cylinder into the base of the seat assembly.
   • Straighten the chair.
6. Attach Pillows and Accessories:
   • Place the lumbar pillow as shown.
   • Thread the two belts of the head pillow through the two holes of the backrest and buckle them.
   • Insert the bunny ears into the holes on the backrest.
   • Tie the bunny tail to the buttons on the back of the chair.
   • Put the armrest covers on the armrests.

5. Operating Instructions

• Height Adjustment: To raise the chair, lift the lever when the person leaves the chair. To lower the chair, press down the lever when the person sits on the chair.
• Armrest Adjustment: The 2D armrests can be lifted and rotated. Hold the armrest left and right to adjust its position. Lift the button on the armrest up to adjust its height.
• Reclining Function: The chair features a 155° tilt function combined with a 25° rocking function. Lift the handle of the recliner adjuster up and lean back on the backrest to recline. To stop reclining, lift the handle and back off the backrest.
• Lumbar and Head Support: The chair includes a removable lumbar support pillow and head pillow for personalized comfort.

6. Maintenance

To maintain the appearance and longevity of your AutoFull C2 Gaming Chair:

• Cleaning: Wipe clean with a damp cloth. Avoid harsh chemicals that may damage the PU leather.
• Material Care: The high-quality PU leather is designed to be durable and easy to clean.
• General Care: Regularly check all screws and connections to ensure they are tight.

7. Troubleshooting

• Chair feels too snug/side wings are restrictive: The chair's design includes deep side wings for a racing style. These are not adjustable. If the fit is too tight, consider adding a thinner seat cushion or adjusting your sitting posture.
• Reclining/Tilting issues: Ensure the tilt mechanism lever is correctly engaged or disengaged. If the chair does not lock into a desired recline angle, verify the mechanism is functioning as intended (some models may only offer on/off tilt, not locking at intermediate angles).
• Discoloration of upholstery: Over time, light-colored PU leather may show signs of discoloration, especially with frequent use or contact with certain fabrics (e.g., dark denim). Regular cleaning as per maintenance instructions can help mitigate this.

8. Specifications

9. Warranty and Support

AutoFull offers free parts replacement within 3 years of purchase. For customer support or warranty claims, please refer to the contact information provided with your product or visit the official AutoFull website.

Visit the AutoFull Store for more information.