InnoGear Microphone Boom Arm Stand User Manual

1. Product Overview

The InnoGear Microphone Boom Arm Stand is engineered for stability, durability, and versatility, providing an optimal solution for recording, broadcasting, and podcasting. Constructed from robust metal with double-braced arms and strong springs, this stand ensures reliable support for a wide range of microphones. Its highly adjustable design allows for precise positioning, while the included pop filter enhances audio clarity by reducing plosive sounds.

Figure 1.1: Complete InnoGear Microphone Boom Arm Stand with all included accessories.

2. Key Features

2.1 Enhanced Durability

The InnoGear mic stand features an upgraded design with alloy steel construction, a thickened arm, and stronger springs to ensure prolonged lifetime and stable performance, preventing common issues like spring deformation found in other stands.

Figure 2.1: Comparison illustrating the enhanced durability features of the InnoGear stand.

2.2 Heavy-Duty Construction

Built with high-quality steel, the stand boasts a superior load-bearing capacity of 3.3 lb (1.5 kg). It includes two positioning screw options, allowing you to adjust the spring tension to increase load-bearing capability for heavier microphones.

Figure 2.2: Illustration of the stand's heavy-duty construction and load capacity.

2.3 Fully Adjustable Extended Reach

The microphone arm offers extensive adjustability for optimal positioning. It features a 360° base rotation, 135° back and forth extension, 180° arm shaft movement for up-and-down adjustments, and a 270° metal adapter for precise microphone angling.

Figure 2.3: Detailed view of the stand's adjustable range and dimensions.

2.4 Desk Clamp Compatibility

The upgraded table clamp is designed to securely grip squared desk edges up to 2 inches (5 cm) in thickness. It features a side screw for firm attachment and a sponge pad to protect your desk surface from scratches. Please ensure your desk edge is flat for optimal functionality.

Figure 2.4: Visual guide for desk clamp compatibility.

2.5 Wide Microphone Compatibility

The stand comes with a standard mic clip suitable for dynamic microphones like Shure SM58 and Samson Q2U. Additionally, a 5/8" to 3/8" screw adapter is included, making it compatible with popular microphones such as Blue Yeti, Blue Snowball, HyperX QuadCast, SoloCast, Shure SM7B, MV7, Fifine AmpliGame, and Fifine K669B.

Figure 2.5: Screw adapter and compatible microphone models.

The included mic holder is designed for microphones with an outer diameter of 32-58mm, featuring internal springs and sponge pads for secure and protected mounting. Note: This specific mic clip is not suitable for Blue Yeti or Blue Snowball microphones.

Figure 2.6: Mic holder specifications and compatible microphone types.

2.6 Studio Quality Pop Filter

The included two-layer pop filter is 360° all-angle adjustable. It effectively dissipates air and reduces velocity, minimizing plosive sounds (like 'P' and 'B') for clean and professional vocal recordings.

Figure 2.7: Functionality of the studio quality pop filter.

3. Setup Instructions

3.1 Package Contents

• Microphone Boom Arm Stand
• Desk Mounting Clamp
• Microphone Clip
• 5/8" to 3/8" Screw Adapter
• Pop Filter
• Microphone Holder (for mics 32-58mm diameter)
• Cable Ties (InnoGear branded)

3.2 Assembly Steps

1. Attach the Desk Clamp: Secure the desk mounting clamp to a flat desk edge (maximum 2 inches thick). Tighten the side screw firmly until the clamp is stable. Ensure the sponge pad is positioned to protect your desk surface.
2. Insert the Boom Arm: Slide the base of the boom arm into the hole on the desk clamp. Tighten the locking knob on the clamp to secure the arm in place.
3. Attach Microphone Adapter/Clip:
   • For microphones with a 5/8" thread (e.g., Blue Yeti, HyperX QuadCast), screw the microphone directly onto the arm's 5/8" screw.
   • For microphones with a 3/8" thread (e.g., some shock mounts), first screw the included 5/8" to 3/8" adapter onto the arm, then attach your microphone or shock mount.
   • For dynamic microphones (e.g., Shure SM58) or microphones with 32-58mm diameter, attach the appropriate microphone clip or holder to the arm's screw, then insert your microphone into the clip/holder.
4. Install the Pop Filter: Loosen the clamp on the pop filter and attach it to a suitable section of the boom arm. Adjust its position and angle using the flexible gooseneck until it is directly in front of your microphone.
5. Cable Management: Use the provided cable ties to neatly secure your microphone cable along the boom arm, preventing tangles and ensuring a clean setup.

Figure 3.1: Example of a fully assembled InnoGear mic stand setup.

4. Operating Your Mic Stand

4.1 Adjusting the Arm

The boom arm is designed for smooth and silent adjustments. To change the height or angle, gently move the arm to your desired position. The internal springs will hold the arm in place. For fine-tuning, utilize the 360° base rotation and the 270° metal adapter at the microphone end.

4.2 Microphone Placement

Position your microphone approximately 6-12 inches (15-30 cm) from your mouth for optimal sound capture. Experiment with different distances and angles to find the best sound quality for your specific recording environment and microphone type.

4.3 Using the Pop Filter

Place the pop filter between your mouth and the microphone, typically 1-2 inches (2.5-5 cm) from the microphone. This will effectively block plosive sounds (harsh 'P' and 'B' sounds) and protect your microphone from moisture, ensuring clearer audio recordings.

5. Care and Maintenance

• Cleaning: Wipe the stand regularly with a soft, dry cloth to remove dust and fingerprints. For stubborn marks, a slightly damp cloth can be used, followed by immediate drying. Avoid abrasive cleaners or solvents.
• Lubrication: The joints and springs are designed for smooth operation. If any squeaking occurs over time, a small amount of silicone-based lubricant can be applied to the pivot points.
• Storage: When not in use, the stand can be easily folded and pushed away for space-saving storage. Ensure it is stored in a dry environment to prevent rust.
• Spring Tension: Periodically check the spring tension. If the stand struggles to hold heavier microphones, consider adjusting the springs to the second hole for increased load-bearing capacity as described in Section 2.2.

6. Troubleshooting

7. Technical Specifications

• Model Number: MU056
• Material: High-Quality Steel
• Color: Black (as depicted in images)
• Max Load Capacity: 1.5 KG (3.3 lb)
• Arm Length (each section): Approximately 13.8 inches (35 cm)
• Desk Clamp Compatibility: Up to 2 inches (5 cm) thick flat desk edges
• Microphone Thread: 5/8" (with included 3/8" adapter)
• Pop Filter: Dual-layer, 360° adjustable
• Item Weight: 760 Grams
• Package Dimensions: 42.9 x 16.69 x 6.4 cm

8. Warranty and Support

InnoGear products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your purchase or visit the official InnoGear website. If you encounter any issues or require technical assistance, please contact InnoGear customer support through the contact information provided on our website or your purchase platform. Please have your model number (MU056) and purchase details ready when contacting support.