Armitron Sport Unisex Digital Chronograph Watch

Introduction

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Armitron Sport Digital Chronograph Watch, Model 40/8417SWT. Designed for versatility and durability, this watch features a quartz movement with a multifunctional digital display, making it suitable for various activities.

Key functions include time display, date, chronograph, lap time, alarm, military time, and a backlight for low-light conditions. Please read this manual carefully to ensure proper use and to maximize the lifespan of your watch.

Product Overview

Image: Front view of the Armitron Sport 40/8417SWT digital watch. It features a white silicone strap, a silver-tone rectangular case, and a clear LCD display showing the time, day, and seconds. The watch face indicates "ARMITRON" at the top and "WR165FT" at the bottom, with buttons labeled "ADJ", "MODE", "STOP/START", and "EL" on the sides.

Your Armitron Sport watch is equipped with four primary buttons for navigation and function control:

• ADJ (Adjust) Button: Used for entering and confirming settings in various modes.
• MODE Button: Cycles through different operational modes (Time, Chronograph, Alarm).
• STOP/START Button: Used to start/stop functions like the chronograph or to change values during setting.
• EL (Electroluminescent) Button: Activates the backlight for improved visibility in low light.

Setup: Setting Time and Date

Setting the time and date accurately is crucial for your watch's functionality. Follow these steps carefully:

1. From the Timekeeping Mode, press and hold the ADJ button until the seconds begin to flash. This indicates you are in setting mode.
2. Press the MODE button to cycle through the settings: Seconds → Hour → Minute → Year → Month → Day.
3. While a value is flashing, use the STOP/START button to increase the value. Hold the button down for faster adjustment.
4. Once all settings are correct, press the ADJ button again to exit the setting mode and save your changes.

Note: If you encounter difficulties, please refer to the official user manual PDF linked in the "Support and Resources" section for detailed diagrams and troubleshooting specific to setting the watch.

Operating Instructions

Switching Modes

Press the MODE button repeatedly to cycle through the following modes:

• Timekeeping Mode (displays time, day, date)
• Chronograph Mode (stopwatch)
• Alarm Mode

Using the Chronograph (Stopwatch)

1. Enter Chronograph Mode by pressing the MODE button until "CHRONO" or similar indicator appears.
2. Press the STOP/START button to start the chronograph.
3. Press the STOP/START button again to stop the chronograph.
4. To reset the chronograph to zero, press the ADJ button while the chronograph is stopped.
5. To record lap times, press the ADJ button while the chronograph is running. The display will show the lap time while the chronograph continues to run in the background. Press ADJ again to return to the running chronograph display.

Setting and Using the Alarm

1. Enter Alarm Mode by pressing the MODE button.
2. Press and hold the ADJ button until the alarm hour flashes.
3. Use the STOP/START button to adjust the hour.
4. Press the MODE button to select minutes, then use STOP/START to adjust.
5. Press ADJ to save the alarm time.
6. To turn the alarm ON/OFF, press the STOP/START button in Alarm Mode (without holding ADJ). An alarm icon will appear/disappear.

Military Time (24-Hour Format)

Your watch supports military time. To switch between 12-hour (AM/PM) and 24-hour (military) format, press the STOP/START button while in Timekeeping Mode (not in setting mode). The display will change accordingly.

Using the Backlight

To illuminate the display in dark conditions, press the EL button. The backlight will activate for approximately three seconds.

Maintenance and Care

Proper care will extend the life and maintain the appearance of your Armitron Sport watch.

Cleaning

Wipe the watch case and silicone strap with a soft, damp cloth. For stubborn dirt, a mild soap solution can be used, followed by rinsing with clean water and drying thoroughly. Avoid harsh chemicals or abrasive cleaners.

Water Resistance

Your Armitron Sport watch is water resistant to 165 feet (50 meters). This means it is suitable for short periods of recreational swimming, but not for diving or snorkeling. Avoid pressing buttons while the watch is submerged.

Image: A water resistance chart illustrating different levels of water protection for watches. It shows icons and descriptions for "Not Water Resistant", "Accidental Splashes", "Water Resistant to 30M (100FT)", "Water Resistant to 50M (165FT)", and "Water Resistant to 100M (330FT)". The 50M (165FT) category, relevant to this watch, is highlighted, indicating suitability for recreational swimming but not diving or snorkeling.

Battery Replacement

Your watch uses 1 Lithium Metal battery (included). When the display becomes dim or functions become erratic, it may be time to replace the battery. It is recommended to have battery replacement performed by a qualified watch technician to ensure proper sealing and maintain water resistance.

Troubleshooting

Specifications

Warranty and Support

Armitron watches are manufactured to high standards and come with a limited warranty. For specific warranty details and terms, please refer to the official Warranty PDF.

• Official User Manual (PDF): Download User Manual
• Warranty Information (PDF): Download Warranty

For further assistance or inquiries, please visit the official Armitron website or contact their customer support directly. Contact information can typically be found on the brand's official website or within the warranty document.