GLCON PS2 Surge Protector Tower User Manual

1. Introduction

The GLCON PS2 Surge Protector Tower is a versatile charging station designed to power multiple electronic devices simultaneously. It integrates a fast wireless charger, six AC outlets, and four USB ports into a compact, space-saving tower design. This manual provides essential information for the safe and efficient use of your device.

2. Safety Information

Please read and understand all safety instructions before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Do not exceed the maximum load capacity of 3000W / 13A.
• This product is designed for indoor use only. Do not expose to moisture or wet conditions.
• Do not disassemble, modify, or attempt to repair the device. Refer all servicing to qualified personnel.
• Keep out of reach of children.
• Ensure the power cord is fully extended and not coiled when in use to prevent overheating.
• Do not use in conjunction with other extension cords or power strips.
• The device features built-in surge protection, lightning protection, short circuit protection, and overload protection. In case of an overload, the power will automatically cut off. Press the reset button on the bottom to restore power.

3. Package Contents

Verify that all items are present in your package:

• GLCON PS2 Surge Protector Tower
• Micro USB Cable
• User Manual

4. Product Features

The GLCON PS2 Surge Protector Tower offers an intelligent combination of multiple charging options and high-degree protection. It includes smart multi-charging capabilities, a wireless charger, individual on/off switches for each section, and robust safety assurance.

Equipped with 4 USB ports (5V/5A Total, 5V/3.1A Max per port) and 6 AC outlets (3000W 13A), the tower provides efficient power delivery for various devices, ensuring faster charging speeds.

4.1 Wireless Charging

The top of the tower features a smart wireless charger compatible with all Qi-enabled mobile phones. It supports three charging modes:

• 10W Mode: For Samsung Note 9, Note 8, Note 5, Galaxy S10, S9, S8, S7, S7 Edge, S6 Edge+ (requires QC 2.0/3.0 adapter).
• 7.5W Mode: For iPhone XS Max, XS, XR, X, 8 Plus, 8 (requires QC 2.0/3.0 adapter).
• 5W Mode: For all other Qi-enabled smartphones.

For fast wireless charging, a QC 2.0/3.0 adapter is required (not included). The device supports both wired and wireless charging methods.

4.2 Safety Protections

The GLCON PS2 is equipped with multiple safety features to protect your electronic devices. It automatically cuts off power when a voltage surge is detected, providing lightning and surge protection.

Advanced safety features include Over-Temperature Protection, Overload Protection, Surge Protection, Lightning Protection, and Short-Circuit Prevention. The device is constructed from fireproof ABS material and holds RoHS, CE, and FCC certifications.

4.3 Space-Saving Design

The vertical tower design helps to save space and organize cables, reducing clutter compared to traditional flat power strips. It also features a retractable extension cord for convenient storage and length adjustment.

5. Setup

1. Unpack the Device: Carefully remove the GLCON PS2 Surge Protector Tower and all accessories from its packaging.
2. Position the Tower: Place the tower on a stable, flat surface, ensuring adequate ventilation.
3. Extend the Power Cord: Pull out the desired length of the extension cord from the base. Ensure the cord is fully extended and not coiled when in use to prevent overheating.
4. Connect to Power: Plug the power cord into a standard 125V AC wall outlet.

6. Operating Instructions

6.1 Using AC Outlets

• Plug your devices into any of the six available AC outlets.
• Each section of outlets has an individual ON/OFF switch. Press the switch to power on or off the corresponding outlets.

6.2 Using USB Ports

• Connect your USB-powered devices to any of the four USB ports using a compatible USB cable.
• The USB ports provide up to 3.1A max per port and 5A total for efficient charging.

6.3 Using the Wireless Charger

• Place your Qi-enabled smartphone directly on the wireless charging pad located on the top of the tower.
• Ensure the phone is centered on the pad for optimal charging.
• The charging indicator light will illuminate to confirm charging is active.
• For fast wireless charging (7.5W/10W), ensure you are using a QC 2.0/3.0 compatible power adapter plugged into one of the AC outlets.

6.4 Overload Protection and Reset

• In the event of an electrical overload, the surge protector will automatically cut power to protect connected devices.
• To restore power, unplug some devices to reduce the load, then press the red reset button located on the bottom of the tower.

7. Maintenance

• Cleaning: Disconnect the power strip from the wall outlet before cleaning. Use a soft, dry cloth to wipe the surface. Do not use liquid cleaners or aerosols.
• Storage: When not in use, retract the power cord into the base for neat storage. Store in a cool, dry place away from direct sunlight and moisture.
• Inspection: Periodically inspect the power cord and the unit for any signs of damage. If damage is found, discontinue use and contact customer support.

8. Troubleshooting

9. Specifications

• Model: PS2
• Brand: GLCON
• Color: White/Black
• AC Outlets: 6
• USB Ports: 4 (5V/5A Total, 5V/3.1A Max per port)
• Wireless Charger Output: 10W / 7.5W / 5W
• Voltage: 125V
• Amperage: 13A
• Max Power: 3000W
• Plug Type: Type B (US Standard)
• Cord Length: 6ft (Retractable)
• Material: Fireproof Acrylonitrile Butadiene Styrene (ABS)
• Safety Features: Surge Protection, Lightning Protection, Overload Protection, Short Circuit Protection, Over-Temperature Protection
• Certifications: RoHS, CE, FCC

10. Warranty and Support

The GLCON PS2 Surge Protector Tower comes with a 12-month warranty from the date of purchase. This warranty covers manufacturing defects and workmanship under normal use.

What is Not Covered:

• Damage caused by misuse, abuse, accident, or neglect.
• Damage from unauthorized repair or modification.
• Normal wear and tear.

Customer Support:

For warranty claims, technical assistance, or any questions regarding your GLCON PS2 Surge Protector Tower, please contact GLCON customer service. Refer to the contact information provided with your product packaging or visit the official GLCON website for support details.