1. Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Cal Dimmable Integrated LED Track Fixture, Model HT-807-WH. Please read this manual thoroughly before installation and retain it for future reference.
Product Features:
- Integrated LED for energy efficiency and long life.
- Dimmable functionality for adjustable light output.
- Constructed from durable casted aluminum.
- Rotary adjustable arm for precise light direction.
- Efficient aluminum extrusion heat sink for optimal performance.
- 3000K color temperature for a warm white light.
- 840 lumens brightness.
2. Important Safety Information
WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing. Consult a qualified electrician if you are unsure about the installation process.
- Read all instructions carefully before beginning installation.
- Ensure the electrical rating of the fixture is compatible with your power supply (120 Volts).
- Do not install this fixture on a track system that is not rated for track lighting.
- Do not attempt to modify the fixture. Any modifications may void the warranty and create a safety hazard.
- Keep flammable materials away from the light fixture when in operation.
- This fixture is designed for indoor use only.
- Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
3. Package Contents
Carefully unpack the fixture and inspect for any damage. Ensure all components are present before discarding packaging materials.
- Cal Dimmable Integrated LED Track Fixture (Model HT-807-WH)
- Instruction Manual
- (Note: Mounting hardware for track systems is typically included with the track itself, not individual heads.)
4. Setup and Installation
This track fixture head is designed for use with compatible 3-wire track lighting systems. Refer to your track system's installation guide for specific instructions on track mounting.
- Turn Off Power: Before starting any electrical work, ensure the power to the track lighting circuit is turned off at the circuit breaker or fuse box.
- Prepare the Track Head: Ensure the track head adapter is aligned correctly with the track. The polarity tab on the adapter should align with the ground groove on the track.
- Insert into Track: Insert the track head adapter into the track slot. Push firmly and twist the adapter 90 degrees to lock it into place. Ensure it is securely seated and makes proper electrical contact.
- Adjust Position: Once installed, the track head can be slid along the track to your desired position.
- Restore Power: After installation is complete and all connections are secure, restore power to the circuit.
Figure 1: Front view of the Cal Dimmable Integrated LED Track Fixture. This image shows the fixture's main body, the integrated LED light source, and the adjustable arm connected to the track adapter.
Figure 2: Dimensions of the Cal Dimmable Integrated LED Track Fixture. The fixture measures approximately 3 inches in length, 3.5 inches in width, and 6.5 inches in height.
5. Operating Instructions
- Turning On/Off: The fixture is controlled by the wall switch connected to your track lighting system. Flip the switch to turn the light on or off.
- Dimming: This fixture is dimmable. If connected to a compatible LED dimmer switch, you can adjust the light intensity by operating the dimmer control. Ensure your dimmer switch is rated for LED lighting.
- Adjusting Light Direction: The fixture features a rotary adjustable arm. You can manually pivot and rotate the light head to direct the light beam as desired. Ensure the fixture is cool to the touch before adjusting.
6. Maintenance
The Cal Dimmable Integrated LED Track Fixture requires minimal maintenance. The integrated LED light source is designed for long-term operation and is not user-replaceable.
- Cleaning: To clean the fixture, ensure the power is turned off and the fixture is cool. Wipe with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or electrical components.
- Inspection: Periodically inspect the fixture and track connections for any signs of wear or damage. If any damage is observed, discontinue use and consult a qualified electrician.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. |
|
|
| Light flickers or dims inconsistently. |
|
|
| Fixture is hot to the touch. |
|
|
8. Specifications
| Model Number | HT-807-WH |
| Brand | Cal |
| Light Source | Integrated LED |
| Wattage | 12W |
| Brightness | 840 Lumens |
| Color Temperature | 3000K (Warm White) |
| Color Rendering Index (CRI) | 80 |
| Voltage | 120 Volts |
| Material | Casted Aluminum |
| Dimensions (L x W x H) | 3" x 3.5" x 6.5" |
| Weight | 14.4 Pounds |
| Mounting Type | Protruding (Track Mount) |
| Control Method | App (Note: This may refer to compatibility with smart home systems, not direct app control of the fixture itself.) |
9. Warranty Information
This Cal Dimmable Integrated LED Track Fixture (Model HT-807-WH) is covered by a manufacturer's warranty for one year from the purchased date. This warranty covers defects in materials and workmanship under normal use.
Please retain your proof of purchase for warranty claims. The warranty does not cover damage resulting from improper installation, misuse, abuse, or acts of nature.
10. Customer Support
If you have any questions, require technical assistance, or need to make a warranty claim, please contact Cal Lighting customer support. Refer to the product packaging or the manufacturer's official website for the most current contact information.
When contacting support, please have your model number (HT-807-WH) and proof of purchase readily available.