VonHaus 71 Key Digital Safe Cabinet User Manual

1. Introduction

This manual provides essential information for the safe and effective use of your VonHaus 71 Key Digital Safe Cabinet. Please read these instructions thoroughly before installation and operation, and retain them for future reference. The VonHaus Key Safe is designed to securely store up to 71 keys, featuring a robust steel body, an electronic keypad for access, and an emergency override system.

2. Safety Information

• Ensure the safe is mounted on a solid, stable surface capable of supporting its weight and potential contents.
• Keep emergency override keys in a secure location away from the safe. Do not store them inside the safe.
• Do not expose the safe to extreme temperatures or moisture.
• Regularly check battery levels to ensure continuous operation.
• Keep the keypad clean and free from debris.

3. Package Contents

Verify that all components are present before proceeding with installation:

• VonHaus 71 Key Digital Safe Cabinet
• 2 x Emergency Override Keys
• Mounting Bolts (4)
• Wall Plugs/Anchors (4)
• Keyrings and Labels (71 sets)
• Instruction Manual

4. Product Overview

The VonHaus Key Safe features a robust design for secure key storage. Key components include:

• Rust-Resistant Solid Steel Body: Provides durability and security.
• Digital Electronic Keypad: For setting and entering a 3-8 digit access code.
• Emergency Key Lock: A manual override for access if the code is forgotten or batteries are depleted.
• Robust Rotary Dial: The handle used to open the safe door after successful code entry or manual unlock.
• LED Indicators: Lights to indicate successful entry, failed entry, and low battery level.
• Adjustable Key Shelves: Seven shelves with integrated hooks for organizing up to 71 keys.

5. Setup

5.1. Wall Mounting

The key safe is designed for wall mounting to ensure maximum security. It comes with pre-drilled mounting holes and all necessary hardware.

1. Choose a suitable, solid wall location for installation. Ensure there are no hidden electrical wires or pipes.
2. Hold the safe against the wall at the desired height and mark the positions of the four pre-drilled mounting holes.
3. Drill pilot holes at the marked positions using an appropriate drill bit for your wall type.
4. Insert the provided wall plugs (anchors) into the drilled holes.
5. Align the safe with the wall plugs and secure it using the provided mounting bolts. Tighten securely.

5.2. Battery Installation

The electronic keypad requires batteries (not included) for operation.

1. Open the safe door using the emergency override key (refer to Section 6.2 if needed).
2. Locate the battery compartment on the inside of the safe door.
3. Insert the required batteries (typically AA, check compartment for exact type and quantity) according to the polarity markings.
4. Close the battery compartment cover.

5.3. Setting Your Personal Code

The safe allows you to set a 3-8 digit personal access code.

1. With the safe door open, locate the red reset button on the inside of the door, near the hinge.
2. Press the red reset button. You will hear a beep, and the yellow LED on the keypad will illuminate.
3. Within 5 seconds, enter your desired 3-8 digit code on the keypad.
4. Press the '#' button to confirm your code. You will hear a confirmation beep, and the yellow LED will turn off.
5. Test your new code: With the door still open, enter your new code followed by '#'. The green LED should light up, and you should be able to turn the rotary dial to simulate opening the safe. If it doesn't work, repeat steps 1-4.

6. Operating Instructions

6.1. Opening the Safe with Your Code

1. Enter your 3-8 digit personal code on the keypad.
2. Press the '#' button. The green LED will illuminate, indicating successful entry.
3. Within 5 seconds, turn the rotary dial clockwise to open the safe door.

6.2. Using Emergency Override Keys

In case you forget your code or the batteries are depleted, you can use the emergency override keys.

1. Locate the emergency keyhole, usually hidden behind a small cover on the keypad panel.
2. Insert one of the emergency override keys into the keyhole and turn it.
3. While the key is turned, rotate the main rotary dial clockwise to open the safe door.
4. Remove the emergency key after opening.

6.3. Organizing Keys

The safe is equipped with 7 adjustable key shelves and 71 keyrings with labels for efficient organization.

• Attach your keys to the provided keyrings and labels.
• The 7 key shelves (4 with 11 hangers and 3 with 9 hangers) can be removed and adjusted to accommodate different key sizes and quantities. Simply slide them out of their slots and re-insert them into desired positions.
• Hang the labeled keyrings onto the hooks on the shelves.

7. Maintenance

7.1. Battery Replacement

When the low battery indicator (red LED) illuminates, it is time to replace the batteries.

1. Open the safe door (using your code or emergency key).
2. Open the battery compartment cover.
3. Remove the old batteries and dispose of them responsibly.
4. Insert new batteries, ensuring correct polarity.
5. Close the battery compartment cover.

7.2. Cleaning

Wipe the exterior of the safe with a soft, damp cloth. Do not use abrasive cleaners or solvents.

8. Troubleshooting

• Safe does not open with code:
  • Ensure batteries are not depleted. Replace if necessary.
  • Verify you are entering the correct 3-8 digit code followed by '#'.
  • If the code is forgotten, use the emergency override keys.
• Keypad is unresponsive:
  • Check and replace batteries.
  • Ensure no debris is obstructing the buttons.
• Door does not close properly:
  • Check for any obstructions preventing the door from fully closing.
  • Ensure the locking bolts are retracting correctly when the door is open.

  

9. Specifications

10. Warranty & Support

All VonHaus products are backed by a minimum 2-year warranty. For support, warranty claims, or further assistance, please refer to the contact information provided with your purchase or visit the official VonHaus website. Please have your model number (3500139) and purchase details ready when contacting support.