Introduction
Thank you for choosing the eMACROS Long Range Solar Wireless Driveway Alarm. This system is designed to provide reliable security alerts for your property, detecting movement from humans, cars, and large animals. With its long-range wireless capabilities and solar-powered sensors, it offers a convenient and effective solution for monitoring your outdoor perimeter.
This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance of your device.
Package Contents
The eMACROS Long Range Solar Wireless Driveway Alarm package typically includes the following components:
- 1 x Receiver Unit
- 2 x Solar-Powered Motion Sensors
- Charging Cables and Adapters (for receiver)
- Mounting Hardware
- User Manual (this document)
Image: The complete eMACROS Driveway Alarm System, showing the receiver and two solar-powered motion sensors, along with their retail packaging.
Setup and Installation
1. Charging the Receiver
The receiver comes with charging cables and adapters. For optimal performance, use the provided adapter specifically with the receiver. Ensure the receiver is fully charged before initial use.
2. Sensor Placement and Charging
The sensors are solar-powered and do not require battery replacement. They are equipped with internal rechargeable batteries that are charged by the solar panel. The sensor can be used directly after receiving it without initial charging.
Image: A solar-powered sensor mounted on a tree, illustrating its self-charging capability even in less than ideal weather conditions.
Choose a location for the sensors that provides a clear line of sight to the area you wish to monitor and receives adequate sunlight for charging. Avoid placing sensors directly facing strong light sources or in areas with dense foliage that might obstruct the solar panel.
3. Mounting the Sensors
The sensors are designed for wall mount installation. Use the provided mounting hardware to securely attach the sensors to a stable surface such as a wall, fence post, or tree. The swivel mount allows you to refine the focus and detection angle of the sensor.
Image: A close-up of the eMACROS solar sensor mounted on a wooden post, highlighting its robust, weather-resistant construction suitable for outdoor use.
4. Adjusting Detection Sensitivity
False alarms can be minimized by adjusting the sensitivity of the sensor's eye with the built-in switch. The sensitivity settings are:
- Hi: Approximately 30 feet detection range.
- Low: Approximately 20 feet detection range.
Refer to the owner's instruction manual for specific details on locating and adjusting this switch.
Image: A visual representation of the sensor's detection range, illustrating how it covers a driveway area and its wireless transmission capability up to 1500 feet.
Operating Instructions
1. Pairing Sensors with Receiver
The system is designed for quick setup. Follow the Quick Start Guide included in your package to pair your sensors with the receiver. The system can be expanded with up to 4 sensors and unlimited receivers for comprehensive property coverage.
2. Selecting Chimes
The receiver offers over 4 fun and unique chimes. You can match different chimes with different sensors around your property to easily differentiate where motion is being detected.
3. Detection and Alerts
Once set up, the wireless driveway alarm detects movement from humans, cars, and large animals. Upon detection, the receiver will sound the selected chime, alerting you to activity in the monitored area.
Image: A collage demonstrating the alarm's ability to detect various types of movement, including people (delivery, potential intruder), vehicles, and wildlife, providing comprehensive property monitoring.
4. Wireless Range
The system boasts a super long receiving range, easily achieving a 1500FT wireless range in most conditions. It has been rigorously tested through thick forestry, hail storms, gusty winds, heavy rains, scorching heat, and snow, ensuring reliable performance in diverse environments.
Maintenance
- Sensor Cleaning: Periodically clean the solar panel and the sensor eye to ensure optimal charging and detection performance. Use a soft, damp cloth to remove dust, dirt, or debris.
- Battery Life: The solar-powered sensors are designed for long-term operation without manual battery replacement. The internal Lithium Polymer batteries have an estimated life of 1 year, continuously recharged by the solar panel.
- Receiver Power: Ensure the receiver remains connected to its power adapter for continuous operation, or recharge its internal battery as needed.
- Weather Resistance: The sensors feature a waterproof ABS housing and sealing ring, ensuring normal operation in rain or shine. While highly weather-resistant, extreme conditions may temporarily affect performance.
Image: The eMACROS solar sensor covered in water droplets, demonstrating its IP65 waterproof rating and ability to withstand various weather elements.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No alert from receiver when motion is detected. | Sensor battery low; Sensor out of range; Obstruction between sensor and receiver; Sensor not paired. | Ensure sensor is receiving adequate sunlight for charging. Relocate sensor closer to receiver. Remove obstructions. Re-pair sensor with receiver according to Quick Start Guide. |
| Frequent false alarms. | Sensor sensitivity too high; Sensor detecting small animals or moving objects (e.g., branches). | Adjust sensor sensitivity to 'Low' setting. Reposition sensor to avoid detecting unwanted movement. |
| Receiver not powering on. | Receiver battery depleted; Incorrect power adapter. | Connect receiver to the provided charging cable and adapter. Ensure the adapter is specifically for the receiver (not compatible with versions prior to 2021). |
| Short wireless range. | Excessive obstructions (thick walls, metal structures); Interference from other wireless devices. | Relocate receiver or sensors to minimize obstructions. Try to identify and reduce interference from other 433 MHz devices. |
Specifications
- Brand: eMACROS
- Model: HS002
- Power Source: Solar, Battery Powered
- Maximum Wireless Range: 1500 Feet
- Mounting Type: Wall Mount
- Battery Type (Sensors): Lithium Polymer (included, rechargeable via solar)
- Battery Life (Sensors): Approximately 1 year (continuously recharged)
- Temperature Range: -20 to 60 Degrees Celsius (-4 to 140 Degrees Fahrenheit)
- Frequency: 433 MHz
- Product Dimensions: 9.41"D x 5.28"W x 5.04"H (approximate)
- Item Weight: 1.48 pounds (total package)
- UPC: 754914525981
- Included Components: 1 receiver and 2 sensors
Warranty and Support
eMACROS stands behind the quality of its products. For warranty information and customer support, please refer to the contact details provided in your product packaging or visit the official eMACROS website. You can also find additional support and FAQs on the Amazon product page.
Official User Guide (PDF): Download PDF
eMACROS Store: Visit Store
Important Safety Information
- Do not attempt to disassemble or repair the device yourself. Refer all servicing to qualified personnel.
- Keep the device away from extreme heat sources and open flames.
- Ensure all mounting hardware is securely fastened to prevent the sensors from falling.
- Dispose of batteries and electronic components responsibly according to local regulations.
