Introduction
This manual provides essential information for the proper installation, operation, and maintenance of your JVC CS-DR6931 drvn DR Series Shallow Mount Coaxial Speakers. These speakers are designed to deliver superior sound performance and durability in various vehicle environments. Please read this manual thoroughly before installation and retain it for future reference.
Product Features
- Factory Location Fit: The tweeter height is designed to be as low as possible, allowing for easy installation in most factory speaker locations.
- Clear and Crisp Sound: Lightweight PP + Mica Cone Material ensures highly responsive, clear, and undistorted sound reproduction.
- Durable Surround: The JVC Hybrid design for the woofer surround combines lightweight cloth material with the reliability and strength of rubber, providing lasting durability in harsh car environments.
- Powerful Sound: These speakers offer 300 watts of peak power, ensuring excellent performance with any car radio or when paired with an amplifier.
Setup and Installation
Proper installation is crucial for optimal performance and longevity of your speakers. If you are unsure about any steps, it is recommended to seek professional assistance.
What's in the Box
- JVC CS-DR6931 Speakers (Pair)
- Instruction Manual
Note: These speakers do not come with grilles.
General Installation Steps
- Prepare Your Vehicle: Disconnect the vehicle's battery to prevent electrical shorts. Remove the door panel or speaker cover to access the existing speaker.
- Remove Old Speakers: Carefully unbolt and disconnect the wiring from the existing speakers. Retain any mounting hardware that may be reusable.
- Connect New Speakers: Connect the speaker wires from your vehicle to the terminals on the JVC CS-DR6931 speakers. Ensure correct polarity (positive to positive, negative to negative). If using an adapter harness, connect it first to the vehicle's wiring, then to the speaker terminals.
- Mount New Speakers: Place the JVC CS-DR6931 speakers into the factory opening. Secure them using appropriate screws or bolts. The shallow mount design facilitates fitting in most locations.
- Test Speakers: Before reassembling the door panel, reconnect the vehicle's battery and test the speakers to ensure they are functioning correctly.
- Reassemble: Once confirmed working, carefully reattach the door panel or speaker cover.
Figure 1: JVC CS-DR6931 speakers with protective grilles.
Figure 2: JVC CS-DR6931 speaker without the grille, showing the cone and tweeter assembly.
Figure 3: Rear view of the speaker, highlighting the magnet structure and wiring terminals for connection.
Operating Instructions
Once installed, your JVC CS-DR6931 speakers will operate as part of your vehicle's audio system. Ensure your head unit or amplifier settings are configured appropriately for optimal sound quality. Avoid excessively high volume levels for prolonged periods to prevent hearing damage and speaker wear.
Maintenance
To ensure the longevity and performance of your JVC CS-DR6931 speakers, follow these simple maintenance guidelines:
- Cleaning: Use a soft, dry cloth to gently wipe the speaker cones and surrounds. Avoid using harsh chemicals or abrasive materials.
- Moisture: While designed for durability, avoid direct exposure to excessive moisture. If speakers get wet, allow them to dry completely before use.
- Inspection: Periodically check the speaker mounts and connections for any looseness or corrosion. Tighten as necessary.
Troubleshooting
If you experience issues with your speakers, refer to the following common troubleshooting steps:
- No Sound: Check all wiring connections to ensure they are secure and correctly polarized. Verify that your car audio system is powered on and the volume is up.
- Distorted Sound: Reduce the volume level. Check the audio source for quality. Ensure the speaker cones are not damaged or obstructed.
- Intermittent Sound: Inspect wiring for loose connections or frayed wires. Check for any shorts in the speaker wiring.
- Uneven Sound: Check the balance and fader settings on your car audio system. Ensure all speakers are connected and functioning.
If problems persist after troubleshooting, consult a qualified car audio technician.
Specifications
| Feature | Specification |
|---|---|
| Model Name | JVCCSDR6931 |
| Speaker Type | Coaxial, 3-Way |
| Speaker Size | 6x9 Inches |
| Speaker Maximum Output Power | 140 Watts (RMS), 300 Watts (Peak) |
| Frequency Response | 58Hz - 21kHz |
| Sensitivity | 88 dB |
| Impedance | 4 Ohm |
| Mounting Depth | 3-1/8 inches |
| Mounting Hole Diameter | 5-3/4 x 8-9/16 inches |
| Material | Lightweight PP + Mica (Cones), Cloth (Surround) |
| Item Weight | 5.5 Pounds |
| Product Dimensions | 17"D x 15.25"W x 9.75"H |
| UPC | 046838079788 |
Warranty
The JVC CS-DR6931 speakers come with a 1-year limited warranty from the manufacturer, JVC KENWOOD USA. This warranty covers defects in materials and workmanship under normal use.
For additional protection, extended protection plans may be available from third-party providers:
- 2-Year Protection Plan
- 3-Year Protection Plan
- Complete Protect (monthly billing, covers eligible past and future purchases)
Please refer to the specific terms and conditions of any purchased protection plan for full coverage details.
Support
For further assistance, technical support, or warranty claims, please contact JVC KENWOOD USA customer service. You can typically find contact information on the JVC official website or through the retailer where you purchased the product.
