Autel MaxiAP AP200 OBD2 Scanner Instruction Manual

Introduction

The Autel MaxiAP AP200 is a compact Bluetooth OBD2 scanner designed for comprehensive vehicle diagnostics. It connects wirelessly to your iOS or Android device, transforming it into a professional diagnostic tool.

• Free APP & Wide Compatibility: The AP200 code reader car diagnostic tool works with most American, European and Asian OBDII-compliant models manufactured from 1996 to 2018. This Autel AP200 APP is suitable for iPhone & Android, which can be lifetime free downloaded. It offers one FREE model and is available to buy extra models if needed ($21. 99 iOS / Android per model).
• One Second Bluetooth Pairing: You can use AP200 turn your iOS/Android device (not support tablet) into a car diagnostic scanner without relying on the mechanic. As easy to use AP200 as a code reader with all the functions of an expensive handheld scan tool. The Bluetooth pairing process needs to be done in App rather than in Android Bluetooth setting. (On the iOS device, go to Settings > Bluetooth.)
• 19 Most Popular Maintenance Services: Autel Bluetooth Scanner AP200, one of the most Economical OBDII diagnostic scan tool in the market. With its advanced 19 hot service functions including Oil Reset, SAS Calibration, Odometer, ABS Bleeding, Injector Coding, Battery Registration, DPF Regeneration, etc., and still growing, Autel AP200 ranks top in professional automotive scanners.
• Full System Diagnosis: Autel AP200 is a professional car diagnostic tool that can access all available car electronic systems like ABS, SRS(Airbag), Engine, Transmission, Brake Systems and etc. This scan tool can read and clear fault codes(DTCs) on all systems and show live data steam of multiple sensors in graph and text.
• AutoVIN & Intuitive Data: With AutoVIN retrieval, the obd2 scanner bluetooth can automatically identify the vehicle and perform a quick scan. This will allow you to easily read and retrieve diagnostic trouble codes. The Vehicle History keeps records of vehicles tested previously so you don’t need to restart a diagnostic session. Exclusive app of Autel and lifetime free upgrade, offer you the best using experience.

Setup Guide

Initial Setup

Follow these steps to set up your Autel MaxiAP AP200:

1. Download and install the "MaxiAP200" app from Google Play Store (for Android) or Apple App Store (for iOS).
2. Register and log in to your Autel account within the app.
3. Plug the AP200 adapter into your vehicle's OBDII port (usually located under the dashboard).
4. Turn your vehicle's ignition ON (engine can be off).
5. Pair the AP200 with your mobile device via Bluetooth. For iOS, go to Settings > Bluetooth. For Android, perform pairing within the MaxiAP200 app under VCI connection. Look for "AP-CAP2KBC03575" or similar.
6. Once connected, the app will prompt you to download the vehicle-specific diagnostic software. One vehicle software is free for lifetime use. Additional software can be purchased.

This image illustrates the quick setup process, showing steps from app download and registration to plugging the device into the DLC port and turning on the ignition.

Operating Instructions

Full System Diagnostics

The AP200 can access all available electronic systems in your vehicle to read and clear fault codes (DTCs) and view live data streams.

This image shows the AP200 device plugged into a vehicle's OBDII port, with a smartphone displaying the "Full Systems Basic Diagnosis" interface, highlighting various vehicle modules like ECM, TCM, BCM, SRS, ABS, and IC.

This image provides an interior view of a car, illustrating how the AP200 connects to various vehicle systems such as Engine, Transmission, SRS, BMS, SAS, ABS, and TPMS for comprehensive diagnosis.

19 Service Functions

The device supports 19 common maintenance services.

This image displays a grid of icons representing 19 popular service functions, including Oil Reset, EPB Reset, TPMS Reset, BMS Reset, Brake Bleed, Injector, SAS Reset, Throttle Adaption, Headlamp Reset, Seats Calibration, Air/Fuel Reset, Cylinder, SRS Reset, Suspension, and Odometer.

This image details 19 commonly used service features, including Oil Reset, Tire Pressure Monitoring System Reset, Electronic Parking Brake Reset, Battery Maintenance System Reset, Steering Angle Sensor Reset, IMMO Keys, Throttle Adaption, Antilock Brake System Reset, Supplemental Restraint System Reset, Diesel Particulate Filter Regeneration, Injector Coding, Suspension, Odometer, Cylinder, Headlamp Reset, Seats Calibration, and Air/Fuel Reset.

Full OBDII Functions

The AP200 supports all 10 OBDII test modes for emissions-related diagnostics.

This image highlights the full OBDII functions, including Read DTCs, Clear DTCs, Freeze Frame, I/M Readiness, O2 Sensor Monitor, Mode 6, Vehicle Info, Vehicle Status, and Saved Reports.

This image illustrates the 10 OBD-II modes, including Read Codes, Erase Code, Live Data Stream, Freeze Frame, I/M Readiness, On-Board Monitor Test, O2 Sensor Test, EVAP System Test, Vehicle Information, and Component Test.

Compatibility

The Autel AP200 is compatible with most American, European, and Asian OBDII-compliant vehicle models manufactured from 1996 to 2018.

This image shows a map indicating vehicle coverage for American (Ford, Chevy, Chrysler, Dodge, Jeep, GM, Tesla), European (Volvo, VW, BMW, Mercedes-Benz, Audi, Peugeot, Renault), and Asian (Toyota, Honda, Nissan, Hyundai, Kia, Lexus, Mazda, Subaru) models, along with a list of 13 supported languages.

Maintenance

Software Updates

The exclusive "MaxiAP200" APP offers lifetime free updates. Ensure your app and device firmware are always up-to-date for optimal performance and compatibility.

Battery Care

The AP200 requires 1 AA battery. Ensure the battery is properly installed and replaced when needed.

Troubleshooting

"Linking Error" Message

• Verify if the vehicle is OBDII compliant (JOBD is not supported).
• Test with another OBDII compliant vehicle (US vehicles like Ford, GM, Chrysler are suggested) to check communication.
• If the issue persists, provide your region/country, vehicle model, year, and VIN code to Autel support for further assistance.

Failed to Log In / "Acquire Failed"

• Confirm you are using the correct app for AP200 and that it's updated to the latest version. If not, update first.
• If the problem persists, contact customer support with a screenshot.

Failed to Purchase/Update Software

• Send a screenshot of the error message and your device's serial number to customer support.

Download Failed / "Install Failed"

• For Android: Long-press the App icon, go to App Info > Storage > Clear Cache, then try downloading again.
• For iOS: Go to Me > Settings > Clear Cache, then try downloading again.

AP200 Failed to Connect via Bluetooth

• Ensure the AP200 device has been registered.
• On your phone, go to Settings > Bluetooth and "Forget" the device.
• Turn Bluetooth off, then on again.
• Go to the AP200 App > VCI connection and try to reconnect.
• Test connection with both iPhone and Android phones to rule out app-specific issues.
• Try using a different phone to see if it connects normally.
• Ensure the app is the latest version and try updating the firmware.

Specifications

Warranty and Support

Warranty

The Autel MaxiAP AP200 comes with a 12-month warranty for any possible quality problems.

Technical Support

For technical support, you can contact Autel via email, Q&A, or hotline as provided on their official website.

User Guide (PDF): Download User Guide

User Manual (PDF): Download User Manual