Baxton Studio 155-9108-AMZ

Baxton Studio Bridgette Storage Ottoman User Manual

Model: 155-9108-AMZ

Introduction

Thank you for choosing the Baxton Studio Bridgette Storage Ottoman. This manual provides essential information for the safe and proper assembly, operation, and maintenance of your new furniture piece. Please read these instructions thoroughly before beginning assembly and retain them for future reference.

The Bridgette Storage Ottoman is designed to offer both comfortable seating and convenient storage. It features a durable polyester fabric upholstery, a foam-padded, biscuit-tufted top, and sturdy rubberwood legs.

Baxton Studio Bridgette Storage Ottoman, Light Blue

Image: The Baxton Studio Bridgette Storage Ottoman in light blue, showcasing its full design with dark brown tapered legs.

Setup and Assembly

The Baxton Studio Bridgette Storage Ottoman requires minimal assembly, primarily involving the attachment of the legs. Please ensure all components are present before starting.

Components Included:

  • 1 x Ottoman Body
  • 4 x Tapered Wood Legs
  • Hardware Pack (bolts, washers, Allen wrench)

Assembly Instructions:

  1. Carefully remove all components from the packaging. Place the ottoman body upside down on a soft, clean surface to prevent scratching.
  2. Locate the pre-drilled holes at each corner on the underside of the ottoman.
  3. Align each tapered wood leg with a pre-drilled hole. Ensure the leg is oriented correctly.
  4. Insert the provided bolts with washers through the leg's mounting plate and into the ottoman body.
  5. Tighten the bolts using the included Allen wrench until each leg is securely fastened. Do not overtighten.
  6. Once all four legs are attached, carefully turn the ottoman upright.
Close-up of ottoman leg attachment

Image: A close-up view of the dark brown tapered wood leg attached to the ottoman body, illustrating the leg design and attachment point.

Operating Instructions

Using the Storage Compartment:

The ottoman features a lift-top design to access a spacious internal storage compartment.

  1. To open, gently lift the top lid from the front edge. The lid is supported by hinges designed to hold it open for easy access.
  2. Place or remove items from the storage compartment.
  3. To close, carefully lower the lid until it rests securely on the ottoman base. Ensure fingers are clear of the closing mechanism.
Bridgette Storage Ottoman with lid open

Image: The Bridgette Storage Ottoman with its top lid open, revealing the spacious interior storage compartment and the supporting hinges.

Seating and Weight Capacity:

The ottoman is designed for seating. The maximum recommended weight for seating is 250 pounds (approximately 113 kg). Do not exceed this weight limit to ensure safety and product longevity.

Maintenance

Proper care will help maintain the appearance and extend the life of your Baxton Studio Bridgette Storage Ottoman.

Fabric Care (Polyester):

  • For general cleaning, wipe the fabric with a damp cloth.
  • For spills, blot immediately with a clean, dry cloth. Avoid rubbing, which can spread the stain.
  • Do not use harsh chemicals, abrasive cleaners, or bleach, as these can damage the fabric.
  • Vacuum regularly using an upholstery attachment to remove dust and debris.
Close-up of ottoman fabric texture

Image: A detailed close-up of the light blue polyester fabric upholstery, showing its texture and biscuit tufting.

Wood Leg Care:

  • Wipe wood legs with a soft, dry cloth to remove dust.
  • Avoid direct sunlight and extreme temperature changes, which can cause wood to fade or crack.
  • Periodically check and tighten leg bolts to ensure stability.

Troubleshooting

Loose Legs:

If the ottoman feels wobbly, the legs may have loosened over time. Turn the ottoman upside down and use the Allen wrench to re-tighten the bolts securing each leg. Do not overtighten.

Lid Not Closing Properly:

Ensure that no items inside the storage compartment are obstructing the lid's closing path. Check the hinges for any signs of damage or misalignment. If hinges are damaged, contact customer support for assistance.

Specifications

FeatureDetail
Product Dimensions (D x W x H)16.1" x 48" x 15.4"
Seating Dimensions (D x W x H)16.1" x 48" x 15.4" (from floor)
ColorLight Blue
Fabric Type100% Polyester
Base MaterialWood
Frame MaterialRubberwood
Maximum Weight Recommendation250 Pounds (113 kg)
Assembly RequiredYes
Item Model Number155-9108-AMZ
UPC193271070275
Bridgette Storage Ottoman with dimensions labeled

Image: The Bridgette Storage Ottoman with key dimensions labeled: 48 inches wide, 16.1 inches deep, and 15.4 inches high.

Warranty and Support

For information regarding product warranty, please refer to the documentation provided at the time of purchase or contact your retailer. Baxton Studio products are typically covered by a limited warranty against manufacturing defects.

If you require further assistance, have questions about assembly, or need to report a damaged or missing part, please contact the retailer from whom you purchased this product. They will be able to provide the most accurate and timely support.

Related Documents - 155-9108-AMZ

Preview Baxton Studio 9581-B Bed Frame Assembly Instructions
Comprehensive assembly guide for the Baxton Studio 9581-B bed frame, detailing parts, tools, and step-by-step instructions for a secure and stable setup.
Preview Baxton Studio Sideboard Assembly Instructions
Detailed assembly instructions for the Baxton Studio Sideboard, including hardware and parts lists, and step-by-step guidance with textual descriptions of diagrams.
Preview Baxton Studio Queen Bed and Headboard Assembly Instructions
Comprehensive assembly instructions for the Baxton Studio Queen Bed frame and 9811-1 Queen Headboard. Includes parts lists, hardware details, and step-by-step guidance for furniture assembly.
Preview LV3 COD 3232BVWI 6-Drawer Dresser Assembly Instructions
Detailed assembly instructions for the LV3 COD 3232BVWI 6-Drawer Dresser, including parts list, hardware identification, and step-by-step guidance. Made with MDF, this dresser requires assembly.
Preview Baxton Studio 9746 Full/Queen Headboard & Queen Bed Assembly Instructions
Step-by-step assembly instructions for Baxton Studio bed frames, including the 9746 Full/Queen Headboard and Queen Bed (model 0818). Features part lists, hardware guides, and diagrams for easy setup.
Preview Assembly Instructions for 9747 Headboard and Queen Bed Frame
Detailed assembly instructions for the Baxton Studio 9747 Full/Queen Headboard and Queen Bed Frame. Includes parts lists, hardware identification, and step-by-step guidance for safe and correct setup.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.