Hama 186312 Weather Station User Manual

Introduction

This manual provides essential instructions for the setup, operation, and maintenance of your Hama 186312 Weather Station. Please read this manual thoroughly before using the device to ensure proper function and longevity. This weather station features a DCF radio clock for automatic time adjustment, displays weather forecasts, indoor and outdoor temperature/humidity, and moon phases. It also includes two programmable alarm times.

Safety Instructions

• Do not expose the device to extreme temperatures, direct sunlight, or high humidity.
• Avoid dropping the device or subjecting it to strong impacts.
• Do not open the device casing. Repairs should only be performed by qualified personnel.
• Keep packaging materials away from children due to choking hazards.
• Dispose of batteries according to local regulations.

Package Contents

• Hama 186312 Weather Station (Main Unit)
• Outdoor Sensor
• 3x AAA Batteries (for main unit)
• Instruction Manual

Note: An optional power supply (4.5V) is not included and must be purchased separately for continuous backlight operation.

Product Overview

Main Unit

Image: The Hama 186312 Weather Station main unit with its color display and the accompanying outdoor sensor.

• Display: Shows time, date, indoor/outdoor temperature and humidity, weather forecast, moon phase.
• SNOOZE/LIGHT Button: Activates backlight, snoozes alarm.
• UP Button: Adjusts settings upwards, toggles display modes.
• DOWN Button: Adjusts settings downwards, toggles display modes.
• SET Button: Enters setting mode, confirms selections.
• ALARM Button: Sets and activates alarms.

Outdoor Sensor

Image: The compact black outdoor sensor mounted on an exterior brick wall, indicating its placement for accurate outdoor readings.

• LED Indicator: Flashes during data transmission.
• Battery Compartment: For power supply.
• RESET Button: For resetting the sensor.

Setup

1. Battery Installation

1. Outdoor Sensor: Open the battery compartment on the outdoor sensor. Insert 2x AAA batteries (not included) according to the polarity markings. Close the compartment securely.
2. Main Unit: Open the battery compartment on the main unit. Insert 3x AAA batteries (included) according to the polarity markings. Close the compartment securely.

Note: For continuous backlight, connect an optional 4.5V power adapter (not included) to the main unit.

2. Initial Synchronization

• Once batteries are installed in both units, place the outdoor sensor near the main unit.
• The main unit will automatically search for the outdoor sensor signal. This may take a few minutes.
• Once connected, the outdoor temperature and humidity will appear on the main unit's display.

3. DCF Radio Clock Reception

• After initial power-up, the main unit will automatically attempt to receive the DCF radio signal for time synchronization. This process can take several minutes to hours, depending on location and interference.
• A radio tower icon on the display indicates successful DCF signal reception.
• If the signal is not received, try moving the unit to a different location, away from electronic devices that may cause interference.

Image: Close-up of the weather station display highlighting features like DCF radio clock synchronization, moon phase display, and the option for time zone adjustment.

4. Outdoor Sensor Placement

• Mount the outdoor sensor in a sheltered location, away from direct sunlight and rain, to ensure accurate readings.
• Ensure the sensor is within the effective transmission range of the main unit (typically up to 30 meters in open areas).
• Avoid placing the sensor near large metal objects or other electronic devices that could interfere with the signal.

Operating Instructions

Time and Date Settings

• Automatic DCF Time: The weather station automatically sets the time via the DCF radio signal.
• Manual Time/Date Setting: If DCF signal is unavailable or you need to adjust the time zone, press and hold the SET button. Use the UP and DOWN buttons to adjust values and SET to confirm.
• Time Zone Adjustment: If the DCF time differs from your local time zone, you can manually set a time zone offset. Refer to the manual setting procedure.

Alarm Function

• Setting Alarms: Press the ALARM button to view alarm times. Press and hold ALARM to enter alarm setting mode. Use UP/DOWN to adjust and ALARM to confirm. The device supports two programmable alarm times.
• Activating/Deactivating Alarms: Press the ALARM button repeatedly to toggle between Alarm 1, Alarm 2, and both off.
• Snooze Function: When an alarm sounds, press the SNOOZE/LIGHT button to activate snooze. The alarm will sound again after a few minutes.

Weather Forecast

• The display shows a weather forecast using four symbols: sunny, slightly cloudy, cloudy, and rainy.
• The forecast is based on atmospheric pressure changes and is an estimation for the next 12-24 hours.

Temperature and Humidity Display

• The main unit displays both indoor and outdoor temperature and humidity.
• Use the UP or DOWN button to switch between Celsius (°C) and Fahrenheit (°F) if applicable.

Moon Phases

• The display includes an icon indicating the current phase of the moon.

Backlight

• When powered by batteries, press the SNOOZE/LIGHT button to briefly illuminate the display.
• When powered by an optional 4.5V power adapter, the backlight can remain continuously on.

Maintenance

• Cleaning: Clean the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Battery Replacement: Replace batteries in both the main unit and outdoor sensor when the low battery indicator appears on the display. Ensure correct polarity.
• Storage: If storing the device for an extended period, remove all batteries to prevent leakage.

Troubleshooting

Specifications

• Model Number: 00186312
• Brand: Hama
• Product Dimensions (Main Unit): 17.5 x 8.6 x 4.75 cm
• Weight: 390 g
• Power Source (Main Unit): 3x AAA batteries (included) or optional 4.5V power adapter (not included)
• Power Source (Outdoor Sensor): 2x AAA batteries (not included)
• Connectivity: Radio Controlled (for outdoor sensor and DCF time)
• Special Features: DCF Radio Clock, Moon Phases, Alarm Function, Weather Forecast
• Material: Plastic
• Color: Black

Warranty and Support

For warranty information and technical support, please refer to the official Hama website or contact your local Hama dealer. Keep your proof of purchase for any warranty claims.

You can find more information and contact details on the official Hama website: www.hama.com