1. Introduction
This manual provides essential information for the safe and efficient use of your HIBOITEC 20 LED Motion Sensor Under Cabinet Lights. Please read these instructions carefully before installation and operation, and retain them for future reference.
Image 1.1: HIBOITEC 20 LED Motion Sensor Lights
The HIBOITEC 20 LED Motion Sensor Light is a versatile, wireless, and rechargeable lighting solution designed to provide illumination in various indoor spaces. Its magnetic mounting and motion sensing capabilities offer convenience and energy efficiency.
2. Product Features
- Motion Sensor: Automatically activates when motion is detected.
- Wireless Installation: No wiring required, offering flexible placement.
- Magnetic Mount: Easily attaches to metal surfaces or included metal strips.
- Rechargeable Battery: Powered by an internal rechargeable battery, eliminating the need for disposable batteries.
- Warm White LEDs: Provides soft, ambient warm white light (3500 Kelvin).
- 3-Way Switching: Offers 'On', 'Off', and 'Motion Sensor' modes.
Image 2.1: Key Features and Operating Modes
This image illustrates the key features of the HIBOITEC LED light, including its 'Always On Mode' and 'Motion & Light Sensor Mode'. It also highlights specifications such as 160 Lumens brightness, 1000mAh battery, and an auto-off feature after 20 seconds in motion sensor mode.
3. What's in the Box
Upon opening your product package, you should find the following components:
- LED Lights (Quantity: 3)
- USB Charging Cable
- Adhesive Tapes
- Metal Strips
- Instruction Manual
4. Setup and Installation
The HIBOITEC LED lights offer two convenient installation methods:
- Direct Magnetic Attachment: If your desired installation surface is made of ironwork (e.g., a metal cabinet), the light's built-in magnet allows for direct attachment.
- Adhesive Metal Strip Installation: For non-ironwork surfaces, use the provided double-sided adhesive tape and metal strips. Clean the surface thoroughly before sticking the metal strip. Once the metal strip is securely in place, the light can be magnetically attached to it.
Image 4.1: Easy Installation Methods
This image demonstrates the two primary installation methods: direct magnetic attachment to metal surfaces (like a refrigerator) and using the adhesive-backed metal strips for non-metallic surfaces (like under a wooden cabinet).
5. Operating Instructions
5.1. Power Modes
Each light features a 3-way switch (On/Off/G) to select the desired operating mode:
- ON: The light will remain constantly on.
- OFF: The light will be turned off.
- G (Motion Sensor Mode): The light will automatically turn on when motion is detected in a dark enough environment. It will turn off approximately 20-30 seconds after motion ceases.
Image 5.1: Motion and Light Sensor Operation
This image illustrates the motion and light sensor's detection range, typically 3-5 meters with a 120-degree angle, ensuring the light activates when you approach.
5.2. Charging the Battery
The lights are equipped with a rechargeable battery. To charge:
- Gently detach the light from its magnetic mounting.
- Connect the provided USB charging cable to the charging port on the light.
- Plug the other end of the USB cable into a compatible USB power source (e.g., USB adapter, computer, power bank).
- A red indicator light will illuminate during charging. Once fully charged, the indicator light will turn green.
Image 5.2: USB Rechargeable Energy Saving
This image shows the USB charging port and the red/green indicator lights, signifying low electricity and fully charged status, respectively.
5.3. Official Product Videos
Video 5.1: Hiboitec Under Cabinet Lighting - Demonstrates the charging process and indicator lights.
Video 5.2: Rechargeable Magnetic LED Light With Motion Detection - Shows the motion detection feature in action.
6. Maintenance
- Cleaning: Wipe the light's surface with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Charging: Recharge the battery when the light output appears dim or when the charging indicator shows red. The frequency of charging depends on usage. For high-traffic areas, charging may be required every few weeks.
- Storage: If storing the lights for an extended period, ensure they are fully charged and store them in a cool, dry place.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on in Motion Sensor mode. | Insufficient darkness; low battery; sensor obstructed. | Ensure the environment is dark enough for the sensor to activate. Charge the battery. Clear any obstructions from the sensor. |
| Light turns on too frequently or at inappropriate times. | Motion sensor is too sensitive or detecting ambient light. | Consider relocating the light to an area with less frequent motion or where ambient light is less likely to trigger it. Ensure the light sensor is not covered if you desire day-time motion detection. |
| Light output is dim. | Low battery. | Recharge the light using the provided USB cable. |
| Light does not stay attached to the surface. | Adhesive failure; surface not clean; heavy vibration. | Ensure the surface is clean and dry before applying adhesive. Reapply new adhesive tape if necessary. Avoid installing in areas with excessive vibration. |
8. Specifications
| Specification | Detail |
|---|---|
| Brand | HIBOITEC |
| Model Name | DL-0028 |
| Item Model Number | 19073 |
| Color | Warm White |
| Material | Plastic+Aluminum+LED |
| Style | Motion Sensing Style |
| Product Dimensions | 7.5"L x 1.33"W x 0.5"H (7.48 x 1.3 x 0.15 inches) |
| Item Weight | 0.6 Pounds (9.6 ounces) |
| Power Source | Battery Powered |
| Installation Type | Under Cabinet, Magnetic Mount |
| Light Source Type | LED |
| Number of Light Sources | 20 |
| Light Color | Warm White |
| Color Temperature | 3500 Kelvin |
| Brightness | 160 Lumens |
| Switch Type | Motion Sensor, Manual On/Off |
| Unit Count | 3 Count |
| Indoor/Outdoor Usage | Indoor |
| UPC | 190731980181, 190731980532 |
For detailed product information, you can refer to the EPREL Product Information Sheet.
9. Warranty and Support
This product comes with a Manufacturer and Seller Combination warranty. For any support inquiries, technical assistance, or warranty claims, please contact HIBOITEC-US directly.