1. Introduction
Thank you for purchasing the BNT Solar Motion Sensor Light Outdoor. This manual provides detailed instructions for the proper installation, operation, and maintenance of your solar light. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product.
Image 1.1: Two BNT Solar Motion Sensor Lights, showcasing their design with integrated solar panels.
2. Product Features
- Solar Energy Supply: Utilizes solar power for energy efficiency and environmental sustainability.
- PIR Motion Detection: Built-in PIR motion sensor detects movement up to 10-26 feet away within a 120-degree range, activating high-bright lighting for 30 seconds.
- Dusk to Dawn Operation: Features a photocell sensor that automatically turns the light off during the day to save energy and on at night.
- Red Light Mode: At night, the light displays a red light, mimicking a surveillance camera to deter potential intruders.
- Long Working Time: Fully charges in 5-6 hours on sunny days, providing up to 5-6 hours of 800lm working time or 30 hours of standby time (40lm).
- Durable & Waterproof: Constructed with a metal case and rated IP66 for water and dust resistance, ensuring reliable outdoor performance in various weather conditions.
- Adjustable Solar Panel: The solar panel can be rotated 180 degrees for optimal sunlight exposure.
- Easy Installation: Designed for straightforward installation without complex wiring.
3. Package Contents
Upon opening the package, please verify that all the following items are included:
- 1 PC Solar Motion Sensor Light
- 1 PC Instruction Manual (this document)
- 1 PC Warning Stickers (simulating security camera presence)
- 1 PC Screw Package (3 screws + 3 rubber plugs)
- 1 PC T-wrench
- 1 PC Mounting Sponge Pad
Image 3.1: Contents of the BNT Solar Motion Sensor Light package, showing the lights, user manual, warning stickers, screw package, T-wrench, and mounting sponge pad.
4. Setup and Installation
4.1 Choosing an Installation Location
Select a location that receives direct sunlight for most of the day to ensure the solar panel can fully charge the internal battery. Avoid areas under eaves, trees, or other obstructions that might block sunlight. The recommended installation height is 7-10 feet for optimal motion detection range (16-26 feet).
Image 4.1: Recommended installation height (7-10ft) and motion sensor detection range (16-26ft) for effective operation.
4.2 Initial Charging
Before first use, ensure the solar light is placed in direct sunlight for at least 8 hours to allow the internal battery to fully charge. The solar panel has a conversion rate of more than 17.4% and can fully charge the 1500mAh built-in battery in about 8 hours on a sunny day.
Image 4.2: The solar light charging process, illustrating how sunlight is converted into energy to charge the battery.
4.3 Mounting Instructions
- Prepare the Surface: Identify the desired mounting location. Ensure the surface is stable and can support the light.
- Mark Drill Points: Hold the light's mounting bracket against the wall and mark the positions for the screw holes.
- Drill Holes: Drill holes at the marked points. The recommended drill bit size is approximately 0.02 feet (6mm) in diameter.
- Insert Wall Plugs: Insert the provided rubber plugs into the drilled holes.
- Secure the Light: Align the mounting bracket with the holes and firmly secure the light using the provided screws and T-wrench.
- Adjust Solar Panel: Adjust the solar panel's angle (up to 180 degrees) to face the direction that receives the most direct sunlight throughout the day.
Image 4.3: Component overview and dimensions of the BNT Solar Motion Sensor Light, useful for installation planning.
5. Operating Instructions
5.1 Automatic Operation
The BNT Solar Motion Sensor Light is designed for fully automatic operation:
- Daytime: During daylight hours, the built-in photocell sensor detects sufficient light, and the unit will automatically switch off to conserve energy and charge its battery.
- Nighttime - Standby Mode: As darkness falls, the light will automatically enter a standby mode, indicated by a single red LED light that remains on. This red light is designed to mimic a surveillance camera, providing a visual deterrent.
- Nighttime - Motion Activated: When motion is detected within its 10-26 foot range and 120-degree angle, the light will automatically switch to a high-bright lighting mode for approximately 30 seconds. After 30 seconds, if no further motion is detected, it will revert to the red light standby mode.
Image 5.1: Illustration of the light's two primary modes: the continuous red light for deterrence and the bright illumination upon motion detection.
5.2 Application Scenarios
This versatile solar light is suitable for various outdoor locations:
- Yard Lighting: Illuminates pathways and open yard spaces.
- Pool Lighting: Provides security and visibility around pool areas.
- Stair Lighting: Enhances safety on outdoor stairs.
- Driveway Lighting: Lights up driveways for safe vehicle and pedestrian movement.
- Garage/Porch/Patio: Ideal for entryways and outdoor living spaces.
Image 5.2: Examples of the solar light's application in various outdoor environments, including yards, pools, stairs, and driveways.
6. Maintenance
To ensure the optimal performance and longevity of your BNT Solar Motion Sensor Light, follow these maintenance guidelines:
- Clean Solar Panel: Regularly wipe the solar panel with a soft, damp cloth to remove dust, dirt, leaves, or snow. A clean panel ensures maximum sunlight absorption and efficient charging.
- Clean Light Sensor/Lens: Keep the motion sensor and LED lens clean to ensure accurate detection and clear illumination.
- Inspect Mounting: Periodically check the mounting screws and bracket to ensure the light remains securely fastened. Tighten if necessary.
- Battery Life: The integrated lithium metal batteries are designed for long life. If the light's performance significantly degrades over time, it may indicate the battery is reaching the end of its lifespan.
- Water Resistance: While the product is IP66 waterproof, avoid submerging it in water or exposing it to high-pressure water jets. Ensure the unit is properly sealed after any inspection or adjustment.
Image 6.1: The solar light demonstrating its IP66 waterproof and dustproof capabilities in rainy conditions.
7. Troubleshooting
If you encounter issues with your BNT Solar Motion Sensor Light, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on at night. | Insufficient solar charge. | Ensure the solar panel is receiving 6-8 hours of direct sunlight daily. Clean the solar panel if dirty. |
| Light stays on during the day. | Photocell sensor is obstructed or faulty. | Ensure no debris is covering the photocell sensor. Relocate the light if it's in a consistently shaded area. |
| Motion sensor is not detecting movement or has poor range. | Sensor obstructed, incorrect installation height, or environmental interference. | Clear any obstructions from the sensor lens. Verify installation height is 7-10 feet. Avoid placing near heat sources or reflective surfaces. |
| Light duration is shorter than expected. | Insufficient charge or aging battery. | Ensure maximum sun exposure for charging. Battery performance may decrease over time; consider replacement if available or contact support. |
| Water inside the light housing. | Seal compromise or extreme weather. | While IP66 rated, extreme conditions or damage can compromise seals. Ensure proper installation. If water ingress occurs, discontinue use and contact support. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | BNT |
| Model Number | BNT-L10W800-2 |
| Power Source | Solar Energy |
| Light Source Type | LED (8 pcs) |
| Wattage | 5 watts |
| Voltage | 12 Volts |
| Motion Sensor Range | 10-26 feet (3-8 meters) |
| Motion Sensor Angle | 120 degrees |
| Recommended Installation Height | 7-10 feet (2.1-3 meters) |
| Waterproof Rating | IP66 |
| Material | Aluminum (case), Fabric (shade) |
| Color | White |
| Product Dimensions | 8.46 x 3.35 x 4.92 inches (21.5 x 8.5 x 12.5 cm) |
| Item Weight | 2.79 pounds (1.27 kg) |
| Batteries | 2 Lithium Metal batteries (included) |
| Solar Panel Rotation | 180 degrees |
| UPC | 631105753180 |
9. Warranty & Support
9.1 Warranty Information
Specific warranty details for the BNT Solar Motion Sensor Light Outdoor are typically provided with the product packaging or can be found on the official BNT website. Please retain your proof of purchase for any warranty claims.
9.2 Customer Support
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact BNT customer support through their official channels. Refer to the product packaging or the BNT brand store on Amazon for contact information.
BNT Store Link: Visit the BNT Store on Amazon
