Childhome Evolu One.80° High Chair Instruction Manual

Introduction

This manual provides detailed instructions for the safe and proper use, assembly, maintenance, and care of your Childhome Evolu One.80° 2-in-1 Baby High Chair. Please read all instructions carefully before assembly and use, and retain this manual for future reference.

Safety Warnings

• Always secure your child with the 5-point safety harness.
• Never leave your child unattended in the high chair.
• Ensure the high chair is placed on a flat, stable surface.
• Keep children away from the product during assembly and disassembly.
• Regularly check all components for wear or damage. Discontinue use if any part is broken or missing.
• This product conforms to EN-STANDARD 14988 and is ASTM Certified F404-21.

Components

Before assembly, ensure all parts are present and undamaged. The Childhome Evolu One.80° High Chair includes the following main components:

• High Chair Seat (with integrated 5-point harness)
• Beechwood Legs (4 pieces)
• Footrest
• Removable ABS Plastic Tray
• Safety Bar
• Assembly Hardware (screws, bolts, etc.)

Figure 1: Key components of the Evolu One.80° High Chair.

Setup and Assembly

Assembly requires careful attention. Follow these steps to correctly assemble your high chair. Some steps may require moderate force to ensure secure connections.

1. Unpack Components: Carefully remove all parts from the packaging and verify against the components list.
2. Attach Legs to Seat: Insert the beechwood legs into the designated slots on the underside of the high chair seat. Ensure they click securely into place. This step may require some force.
3. Install Footrest: Secure the footrest between the front legs at the desired height. Ensure it is level and firmly attached using the provided hardware.
4. Attach Safety Bar: Connect the safety bar to the front of the seat.
5. Install Tray: Slide the removable ABS plastic tray onto the chair's armrests until it locks into position. The tray depth can be adjusted.
6. Final Check: Before first use, ensure all connections are secure and all parts are correctly installed.

Operating Instructions

180° Swivel System

The Evolu ONE.80° high chair features a unique swivel system allowing the seat to rotate 180 degrees. To rotate the seat, pull the latch located at the back of the chair. The seat can be clicked into three positions: straight on, 90° clockwise, or 90° counterclockwise. This allows for easy interaction with your child from various angles without moving the entire chair.

Figure 2: High chair without tray, demonstrating the swivel capability.

Adjustable Height Positions

The high chair offers three adjustable height positions to accommodate different table heights:

• Standard Table Height: Approximately 30 inches (75 cm).
• Children's Table Height: Approximately 20 inches (50 cm).
• Kitchen Island/Countertop Height: Approximately 37 inches (90 cm), achievable with extra long legs (sold separately).

To adjust the height, follow the instructions provided with the leg extension kits. Ensure the chair is stable and locked in place after any height adjustment.

Figure 3: High chair height adjustments for various table types.

Tray and Harness Usage

• Attaching/Removing Tray: The tray slides on and off the armrests. Ensure it clicks securely into place. The tray depth is adjustable to fit your child comfortably.
• Using the 5-Point Harness: Always secure your child using the 5-point safety harness. Adjust the straps to fit snugly but comfortably around your child.
• Safety Bar: The removable safety bar provides additional security. Ensure it is properly attached when the tray is not in use or for younger children.

Figure 4: High chair with removable tray and 5-point harness.

Maintenance and Care

Proper maintenance ensures the longevity and safety of your high chair.

• Cleaning the Seat, Safety Belt, and Legs: Use a damp cloth and dry immediately. Avoid abrasive cleaners.
• Cleaning the Tray: The ABS plastic tray is removable for quick and easy cleanup. It can be hand-washed or wiped clean with a damp cloth.
• Fabric Accessories: Seat cushions and storage baskets (sold separately) should be cleaned according to their specific care labels.
• Regular Inspections: Periodically check all screws, bolts, and connections to ensure they are tight and secure. Inspect for any signs of wear, cracks, or damage to the plastic or wooden components.

Troubleshooting

If you encounter issues with your high chair, refer to the following common solutions:

Specifications

Warranty Information

Specific warranty details for the Childhome Evolu One.80° High Chair are provided by the manufacturer. Please refer to the documentation included with your product or visit the official Childhome website for comprehensive warranty terms and conditions.

Customer Support

For further assistance, replacement parts, or any inquiries regarding your Childhome Evolu One.80° High Chair, please contact Childhome customer support.

• Website: www.childhome.com
• Refer to your product packaging for specific contact details or regional support information.