Easytry123 MRCOOL RG57A6/BGEFU1

Instruction Manual

Easytry123 Remote Control

Model: MRCOOL RG57A6/BGEFU1

Introduction

Welcome to the instruction manual for your new Easytry123 Remote Control, designed for use with MRCOOL RG57A6/BGEFU1 Air Conditioner models. This manual provides essential information on setting up, operating, and maintaining your remote control to ensure optimal performance.

Important Note: This remote control is specifically designed for the MRCOOL RG57A6/BGEFU1 Air Conditioner. Please ensure your AC model matches exactly as stated in the title. If your model number is not listed, this remote may not be compatible.

Due to variations in manufacturing, the exact button layout on your remote may differ slightly from the images shown. However, the core functions described herein will generally apply.

Product Overview

The Easytry123 Remote Control is an infrared replacement unit for your MRCOOL RG57A6/BGEFU1 Air Conditioner. It provides convenient control over various functions of your AC unit.

Front view of the Easytry123 remote control with a blank screen and various buttons. — Front view of the remote control, showing the display screen and primary control buttons.

Back view of the Easytry123 remote control, showing the battery compartment cover. — Rear view of the remote control, highlighting the battery compartment.

Back view of the Easytry123 remote control with the battery compartment open, revealing two AAA battery slots. — Rear view with the battery cover removed, showing the battery slots.

Setup

Battery Installation

Your remote control requires two (2) AAA batteries for operation. Batteries are not included with the remote control.

Locate the battery compartment on the back of the remote control.
Slide the battery compartment cover downwards to open it.
Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
Slide the battery compartment cover back into place until it clicks securely.

Once batteries are installed, the remote is ready for use. No pairing is typically required for infrared remote controls.

Operating Instructions

This section describes the general functions of the buttons found on your remote control. Please note that due to potential variations in remote models, some buttons may differ or be absent on your specific unit. The remote typically displays temperature in Fahrenheit.

Remote Control Button Functions
Button	Function
ON/OFF	Powers the air conditioner on or off.
MODE	Cycles through operating modes (e.g., Cool, Heat, Fan, Dry, Auto).
FAN	Adjusts the fan speed (e.g., Low, Medium, High, Auto).
TEMP ▲/▼	Increases or decreases the set temperature.
SLEEP	Activates or deactivates the sleep mode, which adjusts temperature for comfort during sleep.
SWING	Controls the vertical swing of the air deflector.
FOLLOW ME	Activates a feature where the remote senses the temperature at its location and adjusts the AC accordingly.
LED	Turns the display light on the indoor unit on or off.
SHORT CUT	Recalls your preferred settings with a single press.
TIMER ON	Sets a timer for the air conditioner to turn on automatically.
TIMER OFF	Sets a timer for the air conditioner to turn off automatically.

For detailed instructions on setting specific modes or advanced features, please refer to your MRCOOL Air Conditioner's main user manual.

Maintenance

Battery Replacement

Replace batteries when the remote's display becomes dim or the remote no longer controls the AC unit effectively. Always replace both batteries at the same time with new AAA batteries.

Cleaning

Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners, sprays, or abrasive materials, as these can damage the remote's surface or internal components.

Storage

If the remote control will not be used for an extended period, remove the batteries to prevent leakage and potential damage to the remote.

Troubleshooting

Common Issues and Solutions
Problem	Possible Cause / Solution
Remote not responding to AC unit.	Batteries: Check if batteries are inserted correctly or need replacement. Line of Sight: Ensure there are no obstructions between the remote and the AC unit's infrared receiver. Distance: You may be too far from the AC unit. Move closer. Compatibility: Verify that your AC unit model is exactly MRCOOL RG57A6/BGEFU1. This remote is not universally compatible.
Buttons on remote do not match original or expected functions.	As noted in the introduction, there can be variations in button layouts due to random shipment of different remote types. Focus on the primary functions described in this manual. If a critical function is missing or incorrect, please contact the seller for assistance.
Cannot change temperature display from Celsius to Fahrenheit (or vice-versa).	This remote typically displays temperature in Fahrenheit. There is generally no user-accessible setting to switch between Celsius and Fahrenheit on this specific remote model.

For issues related to the air conditioner itself (e.g., no cooling, strange noises), please consult the user manual for your MRCOOL Air Conditioner or contact a qualified technician.

Specifications

Model Number: MRCOOL RG57A6/BGEFU1
Brand: Easytry123
Power Source: 2 x AAA Batteries (not included)
Connectivity: Infrared (IR)
Compatible Devices: MRCOOL Air Conditioner (Model: RG57A6/BGEFU1)
Max Supported Devices: 1
Display Feature: Fahrenheit display

Warranty and Support

Specific warranty information for this replacement remote control is not provided in the product details. For any issues, questions, or support regarding your Easytry123 Remote Control, please contact the seller directly through the platform where you purchased the product.

It is recommended to retain your purchase receipt for any potential support inquiries.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.