Fellow Eddy Steaming Pitcher Instruction Manual

Introduction

This manual provides instructions for the proper use and care of your Fellow Eddy Steaming Pitcher. Designed for precision and control, the Eddy Pitcher assists in creating silky micro-foam for latte art.

Image: The Fellow Eddy Steaming Pitcher, 12oz, Polished Graphite finish.

Setup and First Use

Before initial use, thoroughly wash the Eddy Steaming Pitcher with warm, soapy water. Rinse completely and dry. The pitcher is ready for use once cleaned.

Operating Instructions

The Fellow Eddy Steaming Pitcher is engineered to optimize milk steaming and latte art pouring. Follow these guidelines for best results:

1. Milk Preparation

• Fill the pitcher with cold milk to the desired level. The 12oz pitcher is suitable for single servings.
• Utilize the internal measurement aid for precise volume.

Image: Internal dots indicating measurement levels for precise pours.

2. Steaming Milk

• Position the steam wand just below the surface of the milk.
• The tapered body design promotes consistent milk spinning, aiding in the creation of silky micro-foam.
• Continue steaming until the milk reaches the desired temperature and texture.

Image: Steaming milk using the Eddy Pitcher, demonstrating the sharp front crease and fluted tip.

3. Pouring Latte Art

• The fluted spout and sharp front crease guide the milk flow for precise pouring.
• The open-ended ribbon handle accommodates various pouring grips and techniques.
• Practice different pouring motions to achieve desired latte art patterns such as hearts, tulips, and rosettas.

Image: Visual representation of the Eddy Pitcher's design benefits for latte art and milk frothing.

Image: The fluted spout in action, demonstrating its precision for detailed latte art designs.

Maintenance and Care

Proper care ensures the longevity and performance of your Eddy Steaming Pitcher.

• Cleaning: Wash the pitcher immediately after each use to prevent milk residue from drying. Use warm water and a mild detergent. A soft brush or sponge is recommended.
• Dishwasher Safety: The pitcher is dishwasher safe. However, hand washing is recommended to preserve the finish over time.
• Drying: Dry thoroughly after washing to prevent water spots and maintain the polished finish.
• Material: Made from 304 18/8 stainless steel. Avoid abrasive cleaners or scouring pads that could scratch the surface.

Troubleshooting

If you encounter issues with your Eddy Steaming Pitcher, consider the following:

• Poor Milk Texture: Ensure your milk is fresh and cold. Verify your steaming technique, including steam wand depth and angle. The pitcher's design aids in creating micro-foam, but proper steaming technique is crucial.
• Difficulty with Latte Art: Latte art requires practice. Focus on milk texture first, then experiment with pouring speed, height, and pitcher angle. The Eddy Pitcher's spout is designed for precision, which may require adjustment if you are accustomed to other pitcher types.
• Water Spots/Stains: These can occur if the pitcher is not dried immediately after washing. Use a soft cloth to dry thoroughly. For stubborn spots, a stainless steel cleaner can be used sparingly.

Specifications

Image: Key specifications including material and dimensions for the 12oz Eddy Pitcher.

Warranty and Support

For warranty information or product support, please refer to the official Fellow website or contact their customer service directly. Details are typically available on the manufacturer's packaging or website.

Manufacturer: Fellow

Website: fellowproducts.com