Important Safety Information
Always read and understand all instructions and warnings in this manual and on the product before use. Failure to follow these instructions can result in serious injury or death.
- SafeZone Load Leg: The adjustable support leg with easy-to-read indicators helps stabilize the seat base and can reduce crash forces by up to 50%. Ensure the load leg is properly extended and engaged.
- Rollover Tested: This product has undergone the Evenflo Rollover Test, which simulates roof-to-ground contact, a common impact in rollover events.
- Side Impact Tested: The car seat base meets or exceeds all applicable Federal Safety Standards and Evenflo's Side Impact Test Standard.
- Compatibility: This base is compatible only with Evenflo LiteMax Infant Car Seats for children weighing 4-35 lbs.
- Proper Installation: Always ensure the base is installed correctly using either the SureSafe LATCH system or the vehicle's seat belt with the belt lock-off. Refer to the recline indicator for precise leveling.
Product Overview
The Evenflo LiteMax DLX Infant Car Seat Base is designed to provide safety and convenience for every journey. It allows for easy transfer of your infant car seat between multiple vehicles, ensuring your child remains secure.
Figure 1: The Evenflo LiteMax DLX Infant Car Seat Base, featuring the adjustable load leg for enhanced stability.
Key Features
- SafeZone Load Leg for reduced crash forces.
- SureSafe Installation System with LATCH guides for improved installation accuracy.
- Belt Lock-Off for secure vehicle-belt installations.
- Easy-to-read Recline Indicator for proper leveling.
- Compatible with Evenflo LiteMax Infant Car Seats (4-35 lbs).
Included Components
The Evenflo LiteMax DLX Infant Car Seat Base package includes the following:
- 1 Car Seat Base
Setup and Installation
Proper installation is critical for your child's safety. Follow these steps carefully.
Load Leg Adjustment
The SafeZone Load Leg provides additional stability and helps reduce crash forces. Ensure it is correctly adjusted for your vehicle.
Figure 2: Detail of the load leg adjustment mechanism. Extend the leg until it firmly contacts the vehicle floor.
Steps:
- Place the car seat base on the vehicle seat.
- Locate the load leg release button/lever.
- Extend the load leg downwards until it makes firm contact with the vehicle floor.
- Ensure the indicator on the load leg shows it is properly engaged (refer to the specific color or symbol on your base).
Video 1: This video demonstrates the functionality and importance of the SafeZone Load Leg on the Evenflo LiteMax DLX Infant Car Seat Base, showing how it stabilizes the base and reduces crash forces.
Recline Indicator
The recline indicator ensures the base is installed at the correct angle for your infant's weight range.
Figure 3: Close-up view of the recline indicator, showing different weight ranges and corresponding proper recline angles.
Usage:
- Observe the indicator after placing the base on the vehicle seat.
- Adjust the recline of the base until the bubble or line falls within the acceptable range for your child's weight (e.g., 4-20 lbs or 20-35 lbs).
- Ensure the indicator remains in the correct zone after tightening the installation.
SureSafe LATCH Installation
The SureSafe LATCH system provides an easy and secure method for installing the car seat base using your vehicle's lower anchors.
Figure 4: The car seat base installed in a vehicle, demonstrating the LATCH connection points.
Steps:
- Locate your vehicle's lower anchor bars (LATCH anchors).
- Attach the LATCH connectors from the car seat base to the vehicle's lower anchor bars. Listen for a click to confirm connection.
- Press down firmly on the car seat base while pulling the LATCH strap to remove all slack. The base should not move more than 1 inch side-to-side or front-to-back at the belt path.
- Verify the recline indicator is correct and the load leg is properly engaged.
Vehicle Belt Installation (Belt Lock-Off)
If your vehicle does not have LATCH anchors or you prefer to use the vehicle's seat belt, the built-in belt lock-off ensures a secure installation.
Figure 5: The underside of the base, highlighting the belt lock-off for vehicle seat belt installation.
Steps:
- Place the car seat base on the vehicle seat.
- Route the vehicle's lap and shoulder belt through the designated belt path on the car seat base.
- Buckle the vehicle seat belt.
- Remove all slack from the vehicle belt by pressing down firmly on the car seat base and pulling the shoulder belt.
- Open the belt lock-off, feed the vehicle belt into it, and close the lock-off securely.
- The base should not move more than 1 inch side-to-side or front-to-back at the belt path.
- Verify the recline indicator is correct and the load leg is properly engaged.
Video 2: This video provides an overview of the Evenflo LiteMax DLX Infant Car Seat Base, highlighting its key features and benefits for safe and convenient travel, including installation methods.
Operating Instructions
Once the base is securely installed in your vehicle, you can attach and detach the Evenflo LiteMax Infant Car Seat.
Securing the Infant Car Seat
- Align the infant car seat with the base.
- Lower the car seat onto the base until you hear an audible click, indicating it is securely latched.
- Gently pull up on the car seat to ensure it is firmly attached to the base.
Figure 6: The Evenflo LiteMax DLX Infant Car Seat properly attached to the installed base.
Removing the Infant Car Seat
- Locate the car seat release handle, typically at the back of the car seat.
- Squeeze or lift the release handle.
- Lift the infant car seat straight up from the base.
Care and Maintenance
Regular cleaning and inspection will help maintain the safety and longevity of your car seat base.
- Cleaning: Wipe plastic and metal parts with a damp cloth and mild soap. Do not use abrasive cleaners or solvents.
- Harness/Straps: Do not immerse harness straps in water or use harsh cleaners, as this may weaken them. Wipe clean with a damp cloth.
- Inspection: Periodically check the base for any signs of damage, wear, or loose parts. Ensure all labels are legible.
- Storage: Store the car seat base in a cool, dry place away from direct sunlight when not in use.
Troubleshooting
If you encounter issues with your car seat base, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Base moves more than 1 inch. | LATCH strap or vehicle belt not tight enough. | Re-install the base, ensuring all slack is removed from the LATCH strap or vehicle belt. Use the belt lock-off if using the vehicle belt. |
| Recline indicator is not in the correct zone. | Base angle is incorrect for child's weight. | Adjust the recline of the base until the indicator shows the correct angle for your child's weight. You may need to use a rolled towel or pool noodle under the base if your vehicle seat is sloped. |
| Infant car seat does not click into base. | Obstruction or misalignment. | Ensure there are no obstructions. Realign the car seat with the base and press down firmly until you hear a click. Check for damage to the car seat or base connectors. |
| Load leg does not extend or retract. | Mechanism jammed or damaged. | Check for any debris obstructing the mechanism. If damaged, discontinue use and contact customer support. |
Product Specifications
| Feature | Detail |
|---|---|
| Model Number | 6411000 |
| Minimum Weight Recommendation | 4 Pounds (1.8 kg) |
| Maximum Weight Recommendation | 35 Pounds (15.8 kg) |
| Minimum Height Recommendation | 17 Inches (43 cm) |
| Maximum Height Recommended | 32 Inches (81 cm) |
| Installation Type | LATCH, Vehicle Belt |
| Orientation | Rear Facing |
| Harness Type | 5-Point (on compatible car seat) |
| Item Dimensions (D x W x H) | 23.5"D x 15.3"W x 8.54"H (59.7 cm x 38.9 cm x 21.7 cm) |
| Item Weight | 8.9 Pounds (4.0 kg) |
| Material Type | Metal, Plastic |
| Color | Black |
Warranty and Customer Support
Evenflo stands behind the quality of its products.
Manufacturer's Warranty
This Evenflo LiteMax DLX Infant Car Seat Base is covered by a 90-day limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For specific terms and conditions, please refer to the warranty card included with your product or visit the official Evenflo website.
Customer Support
For assistance with installation, troubleshooting, or warranty claims, please contact Evenflo Customer Service. You can find contact information on the Evenflo website or by referring to the product packaging.
Visit the Evenflo Store on Amazon for more information and products.