Important Safety Information
Always take safety precautions when repairing electrical appliances. Disconnect the appliance from the power supply before beginning any work. Repairs to gas appliances must only be carried out by a Gas Safe registered technician. If you are not qualified to perform electrical repairs, seek assistance from a certified professional.
Before installation, verify the model of your appliance and confirm with the seller that this part is correct for your specific model. Using an incorrect part can lead to malfunction or damage.
Product Overview
This product is an original Beko power filter board, designed as a replacement component for specific induction hob models. It ensures stable power delivery and filtration for the hob's electronic systems.
Manufacturer Part Number: 663926137
Compatible Models:
- BEKO: HRI64401AT, HXI64200AT, HXI64401ATX, HNI64401AT, HRI64401AT-1, QSM223X, HII64400AT, HQI63400AT, HQI64400AT
- Lamona: LAM1801
Image of the Beko 663926137 Induction Hob Power Supply Board, showing its electronic components and connectors.
Setup and Installation
Installation of the Beko 663926137 Induction Hob Power Supply Board requires technical expertise. It is strongly recommended that installation be performed by a qualified appliance technician.
General Installation Guidelines:
- Power Disconnection: Ensure the induction hob is completely disconnected from the main power supply before starting any work.
- Access Panel: Carefully access the internal components of the induction hob, typically by removing the bottom or top panel. Refer to your specific hob's service manual for detailed instructions.
- Component Removal: Locate the existing power supply board. Disconnect all wiring harnesses and mounting screws. Note the orientation and connection points for proper reinstallation.
- New Board Installation: Install the new Beko 663926137 power supply board, ensuring all connections are secure and correctly oriented. Secure the board with its mounting screws.
- Reassembly: Reassemble the hob panels.
- Testing: Reconnect the hob to the power supply and test its functionality according to the manufacturer's instructions.
Note: This is a general guide. Always consult the specific service manual for your Beko induction hob model for precise, step-by-step installation instructions.
Operating Instructions
The Beko 663926137 Induction Hob Power Supply Board is an internal component and does not have direct user operating controls. Its function is to provide regulated power to the induction hob's various systems, enabling the hob to operate as designed. Once correctly installed, the board operates automatically as part of the hob's normal function.
Maintenance
As an internal electronic component, the Beko 663926137 Power Supply Board requires no routine user maintenance. To ensure its longevity and proper function:
- Ensure the induction hob is kept clean and free from spills that could seep into internal components.
- Avoid exposing the hob to extreme temperatures or humidity.
- If you suspect a fault with the power supply board or the hob's electrical system, contact a qualified service technician for inspection and repair. Do not attempt to clean or repair internal components yourself.
Troubleshooting
If your induction hob is experiencing power-related issues after the installation of this power supply board, consider the following:
- No Power: Check if the hob is properly connected to the main power supply and if the circuit breaker has tripped.
- Intermittent Power: Ensure all internal connections to the power supply board are secure and free from corrosion.
- Error Codes: Consult your induction hob's user manual for specific error codes displayed on the hob's control panel. These codes can indicate the nature of the fault.
If troubleshooting steps do not resolve the issue, or if you are unsure about diagnosing the problem, it is recommended to contact a qualified appliance repair technician. Attempting complex electrical repairs without proper training can be dangerous and may void your appliance's warranty.
Specifications
| Attribute | Value |
|---|---|
| Brand | Beko |
| Manufacturer | BEKO |
| Manufacturer Reference | 663926137 |
| ASIN | B07Q2XWW8X |
| Heating Method | Electric |
| Fuel Type | Electric |
| Installation Type | Countertop (for compatible hobs) |
Warranty and Support
For warranty information regarding the Beko 663926137 Induction Hob Power Supply Board, please refer to the terms and conditions provided by your retailer or Beko at the time of purchase. Keep your proof of purchase for any warranty claims.
For technical assistance, spare parts, or professional repair services, please contact Beko customer support or visit the official Beko website. You can find more information about Beko products and support at the Beko Store.
