1. Introduction
Thank you for choosing the Riobel RU08+C 8-inch Lavatory Faucet. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new faucet. Please read all instructions carefully before beginning installation and keep this manual for future reference.
2. Safety Information
Always observe the following safety precautions during installation and use:
- Turn off the main water supply before beginning any installation or repair work.
- Wear appropriate personal protective equipment, such as safety glasses and gloves.
- Ensure all local plumbing and building codes are met. If you are unsure, consult a qualified plumber.
- Do not overtighten connections, as this can damage the faucet or plumbing.
- Keep small parts away from children.
3. Package Contents
Verify that all components are present before beginning installation:
- 8-inch Lavatory Faucet (Model RU08+C)
- Push Drain Assembly
- Ceramic Cartridge (pre-installed)
- 3/8" Speedway Compression Hoses
- Mounting Hardware (nuts, washers, screws)
4. Setup and Installation
This Riobel lavatory faucet is designed for deck-mount installation and features a Quick Connect system for simplified setup.
4.1 Prepare the Installation Area
- Turn off the hot and cold water supply valves under the sink.
- Clear the area under the sink for easy access.
- Remove any existing faucet and clean the sink surface thoroughly.
4.2 Install Faucet Components
The faucet utilizes a Quick Connect system for the spout and spindles, along with a spindle attachment kit for stability.
Figure 1: Illustration of the Quick Connect system for the Riobel widespread lavatory faucet. This image highlights the hot and cold water supply connections and the spindle attachment kit, which includes a nut with two screws for enhanced stability during installation.
- Insert the faucet body and handles into the pre-drilled holes on the sink deck.
- From underneath the sink, secure the faucet body and handles using the provided mounting hardware. Ensure they are centered and stable.
- Connect the hot and cold water supply lines to the corresponding inlets on the faucet. The 3/8" speedway compression hoses are included.
- Utilize the Quick Connect system to easily attach the spout and spindle components. Ensure a secure fit.
- For additional stability, use the spindle's attachment kit, which includes a nut with two screws, to firmly secure the spindles to the deck.
4.3 Install the Push Drain
- Apply a bead of plumber's putty or silicone sealant around the flange of the drain assembly.
- Insert the drain assembly into the sink's drain hole from above.
- From underneath the sink, secure the drain assembly with the provided washer and nut. Wipe away any excess sealant.
- Connect the drain tailpiece to your P-trap assembly.
4.4 Test for Leaks
- Slowly turn on the hot and cold water supply valves.
- Check all connections for leaks. Tighten any leaking connections carefully.
- Operate the faucet to ensure proper water flow and temperature control.
Figure 2: The Riobel RU08+C lavatory faucet in a polished chrome finish, elegantly installed on a bathroom sink. This image demonstrates the faucet's aesthetic appeal and how it integrates into a modern bathroom setting.
5. Operating Instructions
The Riobel RU08+C faucet features two handles for precise control of water temperature and flow.
- Cold Water: Turn the right handle counter-clockwise to open for cold water.
- Hot Water: Turn the left handle counter-clockwise to open for hot water.
- Mixing Water: Adjust both handles to achieve the desired water temperature and flow rate.
- Push Drain: Press the top of the drain stopper to close the drain for filling the basin. Press again to open and allow water to drain.
6. Maintenance and Care
Proper care will ensure the longevity and appearance of your Riobel faucet.
- Cleaning: Clean the polished chrome finish regularly with a soft, damp cloth. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish.
- Ceramic Cartridge: The faucet is equipped with a durable ceramic cartridge. If you experience drips or leaks from the spout, the cartridge may need to be replaced. Consult a professional plumber for cartridge replacement.
- Aerator: Periodically unscrew and clean the aerator at the tip of the spout to remove mineral deposits and maintain optimal water flow.
7. Troubleshooting
Refer to the following table for common issues and their solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Low Water Flow | Clogged aerator; partially closed supply valves; debris in water lines. | Clean or replace aerator; fully open supply valves; flush water lines. |
| Faucet Drips or Leaks | Worn ceramic cartridge; loose connections. | Replace ceramic cartridge (professional recommended); tighten connections. |
| Water Temperature Issues | Incorrect adjustment of supply valves; issue with water heater. | Ensure supply valves are fully open; check water heater settings. |
| Handles Stiff or Hard to Turn | Mineral buildup; worn cartridge. | Clean around handle base; replace ceramic cartridge. |
8. Specifications
- Model Name: RU08+C
- Brand: Riobel
- Mounting Type: Deck Mount
- Finish Type: Polished
- Material: Metal (Faucet Body), Ceramic (Handle Material)
- Color: Chrome
- Number of Handles: 2
- Included Components: 8" lavatory faucet, Push drain
- Installation Type: DECK
- Item Weight: 5.34 pounds
- Product Dimensions: 12.38 x 6.63 x 6.31 inches
- UPC: 883186173115
9. Warranty Information
The Riobel RU08+C Lavatory Faucet comes with a LIMITED LIFETIME WARRANTY. Please refer to the official Riobel warranty documentation for full terms and conditions. This warranty typically covers manufacturing defects and material flaws under normal use and service.
10. Support
If you require further assistance, have questions not covered in this manual, or need to report a warranty claim, please contact Riobel customer support. Contact information can typically be found on the official Riobel website or on the product packaging.
