SparkPod SPS500

Download PDF
Contents

SparkPod 23-Stage Filtered Shower Head (Model SPS500)

Instruction Manual

1. Introduction

This manual provides essential information for the installation, operation, and maintenance of your SparkPod 23-Stage Filtered Shower Head. Please read these instructions carefully before use to ensure optimal performance and longevity of your product.

The SparkPod 23-Stage Filtered Shower Head is designed to enhance your showering experience by reducing impurities in your water. It features multiple filtration layers and adjustable spray settings to suit your preferences.

2. Product Features

  • 23-Stage Filtration: Incorporates Activated Carbon, Vitamin C, Mineral, and Ceramic Balls to effectively reduce chlorine, heavy metals, and sediments.
  • Skin and Hair Support: Filters water to help alleviate dry skin, rough hair, and itchy skin by reducing unwanted substances.
  • 3 Pressure-Boosting Functions: Offers Massage Rain, Mixed Stream, and Power Focused Stream settings for a customized shower.
  • Easy Installation: Designed for tool-free attachment to any 1/2 inch pipe in under 1 minute.
  • Durable Construction: Made from rustproof ABS material.
Diagram illustrating the 23 stages of filtration within the SparkPod shower head, showing layers of KDF-55, Activated Carbon, Calcium Sulfite, and Vitamin C Balls.

Figure 2.1: Internal diagram of the 23-stage filtration system.

Image showing the three spray settings of the SparkPod shower head: Therapeutic Stream, Power Focused Stream, and Full Stream.

Figure 2.2: The three adjustable spray settings.

3. Setup and Installation

The SparkPod 23-Stage Filtered Shower Head is designed for quick and easy installation without the need for special tools.

  1. Prepare the Shower Arm: Ensure your existing shower arm is clean and free of any old Teflon tape or debris.
  2. Apply Plumber's Tape: Wrap plumber's tape (provided) clockwise around the threads of your shower arm. Apply 3-5 wraps for a secure, leak-free seal.
  3. Attach the Filtered Shower Head: Screw the SparkPod filtered shower head onto the shower arm by hand. Tighten until snug. Do not overtighten.
  4. Check for Leaks: Turn on the water and check for any leaks. If leaks occur, tighten slightly more or reapply plumber's tape.
Diagram showing the 1-minute tool-free installation process of the SparkPod filtered shower head onto a shower arm.

Figure 3.1: Step-by-step installation guide.

Image showing all components included with the SparkPod filtered shower head, such as the shower head, filter capsule, cartridge, flow restrictors, gaskets, and plumber's tape.

Figure 3.2: Included components for installation.

4. Operating Instructions

Your SparkPod 23-Stage Filtered Shower Head offers three distinct spray settings for a personalized showering experience.

  1. Adjusting Spray Settings: Locate the lever or dial on the shower head. Rotate it to cycle through the three available settings: Massage Rain, Mixed Stream, and Power Focused Stream.
  2. Flow Restrictor: The shower head comes with a pre-installed 1.8 GPM flow restrictor. A 2.5 GPM flow restrictor is also included as a bonus. You may choose to remove or replace the flow restrictor based on your desired water pressure, adhering to local regulations.
Image showing the three spray settings of the SparkPod shower head: Therapeutic Stream, Power Focused Stream, and Full Stream.

Figure 4.1: Adjusting the spray settings.

5. Maintenance

Regular maintenance ensures the continued effectiveness of your filtered shower head.

  1. Filter Cartridge Replacement: The filter cartridge has a lifespan of approximately 2-3 months, depending on your water usage and water quality. To replace the cartridge, unscrew the shower head from the filter housing, remove the old cartridge, and insert a new one. Reassemble and tighten by hand.
  2. Cleaning Nozzles: Periodically inspect the shower head nozzles for mineral buildup. Gently rub the rubber nozzles to dislodge any deposits. For stubborn buildup, a mild descaling solution can be used.
Image demonstrating how to twist, swap, and secure the filter cartridge in the SparkPod shower head for easy replacement.

Figure 5.1: Filter cartridge replacement process.

6. Troubleshooting

ProblemPossible CauseSolution
Low Water PressureClogged nozzles or filter; flow restrictor in place.Clean nozzles. Replace filter cartridge. Check if flow restrictor is suitable for your preference (refer to Operating Instructions).
Leaking from connection pointsImproperly tightened connection; insufficient plumber's tape.Ensure connections are hand-tight. Reapply plumber's tape to threads.
Water not filtering effectivelyExpired filter cartridge.Replace the filter cartridge (refer to Maintenance).

7. Specifications

  • Model: SPS500
  • Material: Plastic
  • Finish Type: Chrome
  • Installation Type: Wall Mounted
  • Product Dimensions: 4.13"L x 3.15"W
  • Number of Settings: 3
  • Efficiency: 1.8 GPM (adjustable with included 2.5 GPM restrictor)
  • Special Feature: 23-stage filter, three pressure-boosting functions
  • Item Weight: 1.48 pounds

8. Warranty and Support

SparkPod is committed to delivering quality shower products. For any questions or support regarding your 23-Stage Filtered Shower Head, please contact our dedicated Customer Happiness team. Our team is available every day of the week to assist you.

For further assistance, please visit the SparkPod Store on Amazon.

Video 8.1: Overview of the Luxury Filtered Shower Head Set.

© 2023 SparkPod. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.