1. Introduction
Thank you for purchasing the Immax 08947L LED Desk Lamp. This manual provides detailed instructions for the safe and efficient use of your new lamp, featuring a dimmable LED light and an integrated display for time, date, and temperature. Please read this manual thoroughly before use and retain it for future reference.
2. Safety Instructions
- Ensure the lamp is placed on a stable, flat surface to prevent tipping.
- Do not expose the lamp to water or excessive humidity. This product is rated IP20, meaning it is protected against solid objects over 12.5mm but has no protection against liquids.
- Use only the provided power adapter or one with identical specifications (5V).
- Do not attempt to disassemble or modify the lamp. This may void the warranty and pose a safety risk.
- Keep the lamp away from heat sources and direct sunlight to prevent damage to the display and internal components.
- Clean the lamp with a soft, dry cloth. Do not use abrasive cleaners or solvents.
3. Package Contents
Please check the package for the following items:
- Immax 08947L LED Desk Lamp
- Power Adapter (5V)
- User Manual (this document)
4. Product Overview
The Immax 08947L LED Desk Lamp combines functional lighting with a convenient digital display. Its flexible neck allows for easy adjustment of light direction, while the base features a leather-like finish for an elegant appearance.
Figure 4.1: Full view of the Immax 08947L LED Desk Lamp, showcasing its flexible arm and integrated display.
Figure 4.2: A close-up view of the digital display, showing the time, temperature, and day of the week.
Figure 4.3: Side profile of the lamp, illustrating the flexible neck design that allows for adjustable lighting angles.
Figure 4.4: An angled view highlighting the lamp's base with its leather-like texture and the clear digital display.
5. Setup
- Unpack the Lamp: Carefully remove all components from the packaging.
- Place the Lamp: Position the lamp on a stable, flat surface where you intend to use it.
- Connect Power: Insert the small end of the power adapter cable into the DC input port on the back or side of the lamp's base. Plug the other end of the power adapter into a standard electrical outlet (230V).
- Initial Power On: The lamp's display should illuminate, and the light can be turned on using the touch controls.
6. Operating Instructions
6.1. Lamp Operation
- Power On/Off: Touch the power symbol (O) on the lamp's base to turn the light on or off.
- Adjust Brightness (Dimming): With the light on, touch and hold the power symbol or use dedicated brightness control buttons (if present, typically indicated by '+' and '-' symbols) to adjust the brightness level. The lamp supports stepless dimming.
- Adjust Color Temperature: If your model supports color temperature adjustment, there will be a separate button (often indicated by a sun or color temperature icon). Press this button to cycle through different light modes (e.g., warm white, cool white, natural light).
6.2. Display Settings
The integrated display shows time, date, and temperature. There are typically control buttons on the base near the display for adjustment.
- Setting Time and Date:
- Locate the 'SET' button (often labeled 'M' or 'Mode'). Press and hold it for a few seconds until the time display starts flashing.
- Use the 'UP' and 'DOWN' buttons (often labeled '∧' and '∨' or '+' and '-') to adjust the hour. Press 'SET' again to confirm and move to minutes.
- Repeat the process for minutes, year, month, and day.
- Press 'SET' one last time to exit the setting mode.
- 12/24 Hour Format: In time setting mode, or by pressing a specific button (refer to on-device labels), you may be able to switch between 12-hour and 24-hour formats.
- Temperature Unit: Press the 'UP' or 'DOWN' button (or a dedicated '°C/°F' button) while not in setting mode to switch between Celsius (°C) and Fahrenheit (°F).
- Alarm Function: Some models include an alarm. Look for an 'ALARM' or 'A' button. Press it to view alarm time, and press and hold to set it using the 'UP'/'DOWN' buttons.
7. Maintenance
- Cleaning: Disconnect the power before cleaning. Use a soft, dry, lint-free cloth to wipe the lamp's surface. For stubborn marks, a slightly damp cloth can be used, followed by immediate drying. Avoid getting moisture into any openings.
- Storage: If storing the lamp for an extended period, disconnect it from power and store it in a dry, cool place, preferably in its original packaging.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | No power connection. Faulty adapter. | Ensure the power adapter is securely plugged into both the lamp and the wall outlet. Try a different outlet. |
| Display is blank or flickering. | Power issue. Internal fault. | Check power connection. Disconnect and reconnect power. If the issue persists, contact support. |
| Light is not dimming. | Incorrect operation. | Ensure you are touching and holding the dimming control correctly. Refer to section 6.1. |
| Time/Date cannot be set. | Incorrect setting procedure. | Follow the instructions in section 6.2 carefully, ensuring you press and hold the 'SET' button to enter setting mode. |
9. Specifications
- Brand: Immax
- Model: 08947L
- Light Source Type: LED
- Wattage: 6.5 Watt
- Voltage: 5 Volt
- Material: Leather (base finish)
- Product Dimensions: 89.99 x 65 x 400 cm (Length x Width x Height)
- IP Rating: IP20
10. Warranty and Support
This product comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support or service inquiries, please contact the Immax customer service department or your authorized dealer.
Please have your model number (08947L) and purchase information ready when contacting support.
