Introduction
This manual provides instructions for the Altec Lansing IMW396 Aqua Bliss Voice Bluetooth Speaker. Please read this manual thoroughly before using the device to ensure proper operation and to understand its features, including its IPX6 water resistance, 5-hour battery life, and voice assistant integration.
What's in the Box
- Altec Lansing IMW396 Aqua Bliss Voice Bluetooth Speaker
- Micro USB Charging Cable
Image: The Altec Lansing IMW396 Aqua Bliss Voice Bluetooth Speaker in aqua blue and white, shown alongside its black Micro USB charging cable.
Controls and Features
The Altec Lansing IMW396 Aqua Bliss Voice speaker features intuitive controls located on its front surface. These controls manage power, volume, track navigation, and voice assistant functions.
- Power Button (Center Top): Press and hold to power the speaker on or off. A short press will play or pause music.
- Minus Button (Center Bottom): Short press to decrease volume. Press and hold to navigate to the previous track.
- Plus Button (Top): Short press to increase volume. Press and hold to navigate to the next track.
- Phone Button (Center): Press to activate the voice assistant (Siri or Google Assistant) or to answer/end calls.
Image: A detailed view of the Altec Lansing IMW396 speaker's control panel, showing the power, volume, and phone buttons.
Setup
Charging the Speaker
Before initial use, fully charge your Aqua Bliss Voice speaker. Locate the USB charging port on the side of the speaker, protected by a rubber flap. Open the flap and insert the Micro USB charging cable. Connect the other end of the cable to a power source (e.g., a computer USB port or a USB wall adapter). A red LED light on the speaker's front will illuminate during charging. Once fully charged, the red LED will turn off. A full charge typically takes 1 to 2 hours. It is recommended to use the provided charging cable and a standard USB power adapter.
Image: Side view of the Altec Lansing IMW396 speaker, showing the Micro USB charging port with its protective rubber cover open.
Bluetooth Pairing
- Ensure your speaker is fully charged.
- Power on the speaker by pressing and holding the Power button for 3-5 seconds. You will hear an audible "Powering on, welcome to Altec Lansing" prompt, and the LED will flash red and blue, indicating it's in pairing mode.
- On your mobile device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
- Select "Aqua Bliss Voice" from the list of available devices.
- Once successfully paired, you will hear a confirmation tone, and the LED indicator will turn solid blue.
Operating Instructions
Music Playback
- Play/Pause: Short press the Power button.
- Volume Up: Short press the Plus (+) button.
- Volume Down: Short press the Minus (-) button.
- Next Track: Press and hold the Plus (+) button.
- Previous Track: Press and hold the Minus (-) button.
Voice Assistant (Just Ask)
The "Just Ask" feature allows you to access your smartphone's voice assistant (Siri or Google Assistant) directly through the speaker.
- Ensure your speaker is paired with your smartphone.
- Press the Phone button to activate your device's voice assistant.
- Speak your command clearly into the speaker's microphone.
Answering/Ending Calls
- When a call comes in, press the Phone button to answer.
- To end a call, press the Phone button again.
Video: This video demonstrates the basic functions of the Altec Lansing IMW396 Aqua Bliss Voice speaker, including powering on, adjusting volume, and using the voice assistant feature.
Water Resistance (IPX6 Rated)
The Altec Lansing IMW396 Aqua Bliss Voice speaker is designed with an IPX6 water resistance rating. This means it is protected against powerful water jets from any direction. It is suitable for use in showers, by the pool, or in other wet environments. Ensure the USB charging port cover is securely closed before exposing the speaker to water.
Image: The Altec Lansing IMW396 speaker hanging from a showerhead, demonstrating its water-resistant design during use.
Maintenance
- Clean the speaker with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
- Ensure the USB port cover is always securely closed when not charging to maintain water resistance.
- Store the speaker in a cool, dry place when not in use for extended periods.
- Avoid exposing the speaker to extreme temperatures.
Troubleshooting
| Problem | Solution |
|---|---|
| Speaker does not power on. | Ensure the speaker is fully charged. Press and hold the Power button for 3-5 seconds. |
| Cannot pair with Bluetooth device. | Make sure the speaker is in pairing mode (flashing red and blue LED). Ensure Bluetooth is enabled on your device and it is within range (up to 30 feet). Try unpairing and re-pairing the device. |
| No sound or low volume. | Increase the volume on both the speaker and your connected device. Ensure the speaker is properly paired. |
| Voice Assistant not responding. | Ensure the speaker is paired with your smartphone and the voice assistant feature is enabled on your phone. Speak clearly into the speaker's microphone. |
| Battery drains quickly. | Ensure the speaker is fully charged before use. Battery life is approximately 5 hours. |
Specifications
- Model Name: IMW396
- Brand: Altec Lansing
- Connectivity Technology: Wireless (Bluetooth)
- Wireless Range: Up to 30 feet
- Water Resistance Rating: IPX6 (Waterproof)
- Battery Life: Up to 5 hours
- Power Source: Battery Powered (1 Lithium Ion battery included)
- Control Method: Voice, Buttons
- Compatible Devices: Smartphone, Tablet, Laptop
- Item Weight: 9.6 ounces
- Package Dimensions: 8.9 x 5.71 x 2.44 inches
- UPC: 021331640413
Warranty Information
The Altec Lansing IMW396 Aqua Bliss Voice Bluetooth Speaker comes with a 1-Year Limited Warranty. For specific terms and conditions, please refer to the warranty card included with your product or visit the official Altec Lansing website.
Customer Support
For further assistance, technical support, or warranty claims, please contact Altec Lansing customer service. You can find contact information on the official Altec Lansing website or in the product packaging.
