Soundmaster NR50 Nostalgia Stereo Music Center

Introduction

Thank you for choosing the Soundmaster NR50 Nostalgia Stereo Music Center. This versatile system combines classic design with modern functionality, allowing you to enjoy your favorite music from various sources including vinyl records, CDs, DAB+/UKW radio, Bluetooth devices, and USB media. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance and longevity of your device. Please read this manual thoroughly before use and retain it for future reference.

The Soundmaster NR50 Music Center with its wooden cabinet and open lid, revealing the turntable ready for playback.

Important Safety Information

To reduce the risk of electric shock, fire, etc., please observe the following safety instructions:

• Do not expose this appliance to rain or moisture.
• Do not place objects filled with liquids, such as vases, on the apparatus.
• Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
• Only use attachments/accessories specified by the manufacturer.
• Unplug this apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way.

Package Contents

Please check that all items are present and in good condition:

• Soundmaster NR50 Nostalgia Stereo Music Center
• Remote Control
• DAB+/UKW Antenna
• Instruction Manual
• Power Cable

Product Overview

Front Panel

The front of the Soundmaster NR50, displaying the speaker grille, control knobs, and digital display.

A detailed view of the control panel, highlighting the function buttons, USB port, and auxiliary input.

• Power/Standby Button: Turns the unit on or off.
• Function/Mode Selector: Switches between CD, Phono, DAB/UKW, Bluetooth, USB, and AUX modes.
• Volume Control Knob: Adjusts the audio output level.
• Tuning/Navigation Knob: For radio tuning, menu navigation, and track selection.
• LCD Display: Shows current mode, track information, radio frequency, time, etc.
• CD Tray: For inserting audio CDs.
• Control Buttons: Play/Pause, Stop, Skip Forward/Backward, Folder/Preset.
• USB Port: For connecting USB flash drives for playback or encoding.
• Aux-In (3.5mm) Jack: For connecting external audio devices.
• Headphone (3.5mm) Jack: For private listening.

Top Panel (Turntable)

The turntable section of the Soundmaster NR50, featuring the record platter and tonearm with its cartridge.

• Turntable Platter: Where the record is placed.
• Spindle: Holds the record in place.
• Tonearm: Holds the cartridge and stylus.
• Stylus (Needle): Reads the grooves of the record. (Audio Technica Magnet-Tonabnehmersystem)
• Cue Lever: Lifts and lowers the tonearm.
• Speed Selector: Switches between 33⅓, 45, and 78 RPM.

Rear Panel

• AC Power Input: Connects to the main power supply.
• DAB+/UKW Antenna Input (75 ohm): For connecting the supplied antenna.
• Line-Out (RCA L/R): For connecting to external amplifiers or speakers.

Remote Control

The remote control for the Soundmaster NR50, providing convenient access to all functions from a distance.

• Power Button: Turns the unit on/off.
• Function Button: Cycles through input modes.
• Navigation Buttons (Up/Down/Left/Right/Enter): For menu navigation and selection.
• Playback Controls (Play/Pause, Stop, Skip): For CD, USB, and Bluetooth playback.
• Volume +/-: Adjusts volume.
• Scan: Scans radio stations.
• REC: Initiates recording to USB.
• EQ: Selects preset equalizer settings.
• Sleep/Timer: Sets sleep timer or alarm.
• Mute: Mutes audio output.

Setup Guide

1. Unpacking

Carefully remove the unit from its packaging. Retain the packaging materials for future transport or storage. Remove any protective films or covers from the unit.

2. Connecting Power

Connect the supplied AC power cable to the AC power input on the rear of the unit, then plug the other end into a standard AC 230V~50Hz wall outlet.

3. Antenna Connection

Connect the supplied DAB+/UKW antenna to the 75 ohm antenna input on the rear of the unit. Extend the antenna fully for optimal reception.

4. Initial Power On

Press the Power button on the front panel or remote control to turn on the unit. The LCD display will illuminate.

Operating Instructions

General Operation

• Power On/Off: Press the Power button.
• Function Selection: Press the Function button repeatedly to cycle through modes (CD, Phono, DAB/UKW, Bluetooth, USB, AUX).
• Volume Adjustment: Rotate the Volume knob or use Volume +/- buttons on the remote.

CD Player Operation

1. Press the Function button to select CD mode.
2. Gently insert a CD (CD, CD-R/RW, CD-MP3) into the CD tray. The disc will be loaded automatically.
3. Playback will begin automatically. Use the Play/Pause, Stop, and Skip buttons to control playback.

Turntable Operation

1. Open the top lid of the unit.
2. Press the Function button to select Phono mode.
3. Place a record on the turntable platter.
4. Select the correct speed (33⅓, 45, or 78 RPM) using the speed selector switch.
5. Move the tonearm over the record and gently lower it using the cue lever.
6. At the end of the record, the tonearm will automatically return to its rest position.

DAB/UKW Radio Operation

1. Press the Function button to select DAB or UKW (FM) mode.
2. For DAB: The unit will automatically scan for available stations on first use. Use the Tuning/Navigation knob to browse stations.
3. For UKW: Use the Tuning/Navigation knob to manually tune to a frequency or press the Scan button to auto-scan.
4. To save a preset station: Tune to the desired station, then press and hold the Preset button until the display shows 'Preset Store'. Use the navigation knob to select a preset number, then press Enter to confirm.

Bluetooth Pairing

1. Press the Function button to select Bluetooth mode. The display will show 'Bluetooth' and 'Pairing'.
2. Enable Bluetooth on your external device (smartphone, tablet, etc.) and search for 'NR50'.
3. Select 'NR50' from the list of available devices to pair. Once connected, the display will show 'Connected'.
4. You can now play audio from your Bluetooth device through the Soundmaster NR50.

USB Playback

1. Insert a USB flash drive into the USB port on the front panel.
2. Press the Function button to select USB mode.
3. The unit will automatically detect and begin playing compatible audio files (e.g., MP3).
4. Use the playback controls to navigate through tracks and folders.

Encoding Function (Recording to USB)

The NR50 allows you to record audio from CD, Phono, or Radio directly to a connected USB flash drive.

1. Insert a USB flash drive into the USB port.
2. Select the desired source (CD, Phono, DAB/UKW) using the Function button.
3. Start playback of the source material (e.g., play a CD track, start a record).
4. Press the REC button on the front panel or remote control. The display will indicate recording is in progress.
5. Press the REC button again to stop recording. The recorded file will be saved on the USB drive.

Aux-In Connection

Connect an external audio device (e.g., MP3 player) to the 3.5mm Aux-In jack on the front panel using a 3.5mm audio cable. Select AUX mode using the Function button to play audio from the connected device.

Headphone Connection

For private listening, connect headphones with a 3.5mm jack to the Headphone jack on the front panel. The main speakers will be muted automatically.

Maintenance and Care

• Cleaning the Unit: Wipe the unit with a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents.
• CD Player Care: Use a clean, lint-free cloth to wipe CDs. Do not touch the disc's playing surface.
• Turntable Stylus Care: Gently clean the stylus periodically with a soft brush, brushing from back to front. Avoid touching the stylus with your fingers. Replace the stylus if sound quality deteriorates significantly.
• Dust Cover: Keep the dust cover closed when not in use to protect the turntable from dust.

Troubleshooting

Technical Specifications

Warranty and Support

Soundmaster products are designed and manufactured to the highest quality standards. In the unlikely event that you experience any issues with your Soundmaster NR50, please refer to the troubleshooting section of this manual first.

For warranty information and technical support, please visit the official Soundmaster website or contact your local dealer. Keep your proof of purchase for warranty claims.

Online Support: www.soundmaster.de