Fiamma Blocker Pro 250 Awning Front Wall Instruction Manual

1. Product Overview

The Fiamma Blocker Pro 250 is a practical front wall designed for use with crank and bag awnings. It features a large transparent window section and an integrated ground extension, providing an additional sheltered area. Constructed from durable, water-repellent, UV-resistant, and washable vinyl, this front wall offers reliable protection and privacy. Its design allows for straightforward installation by sliding into the awning's front piping rail. Standard anchoring stakes are included to ensure secure positioning.

2. Safety Warnings

• Always ensure correct anchoring and secure installation of the front wall to prevent damage or injury, especially in windy conditions.
• Keep the product away from direct heat sources and open flames to avoid material damage or fire hazards.
• Exercise caution around moving parts during both the installation and operation processes.

3. Package Contents

The Fiamma Blocker Pro 250 package typically includes:

• 1x Fiamma Blocker Pro 250 Front Wall
• Standard Anchoring Stakes

4. Setup and Installation

Follow these steps for proper installation of your Fiamma Blocker Pro 250 front wall:

1. Extend the Awning: Fully extend your existing crank or bag awning.
2. Locate Piping Rail: Identify the piping rail located on the front lead bar of your awning.
3. Insert Front Wall: Carefully slide the keder (beading) of the Fiamma Blocker Pro 250 front wall into the awning's piping rail. Ensure it is evenly distributed across the width of the awning.
4. Secure to Ground: Once the front wall is in place, use the provided anchoring stakes to secure the ground extension firmly to the ground. This prevents the wall from lifting in the wind and ensures stability.
5. Check Stability: Verify that the front wall is taut and securely anchored. Adjust as necessary.

5. Operating Instructions

Once installed, the Fiamma Blocker Pro 250 provides an extended living space:

• The large transparent window allows natural light into the enclosed area while offering protection from wind and light rain.
• The ground extension helps to seal the area, reducing drafts and providing a more contained space.
• The front wall can be easily removed by reversing the installation steps when not needed.

6. Maintenance

To ensure the longevity and appearance of your Fiamma Blocker Pro 250:

• Cleaning: The vinyl material is washable. Clean with mild soap and water. Avoid using harsh chemicals, abrasive cleaners, or stiff brushes, as these can damage the material or its UV-resistant coating.
• Drying: Always ensure the front wall is completely dry before folding and storing to prevent mildew and odors.
• Storage: Store in a cool, dry place away from direct sunlight when not in use.

7. Troubleshooting

• Difficulty Inserting into Rail: Ensure the piping rail is clean and free of debris. Apply a silicone-based lubricant if necessary to ease insertion.
• Front Wall Not Taut: Re-check the positioning in the piping rail and ensure all anchoring stakes are securely fastened and tensioned.
• Water Accumulation: Ensure the awning itself is pitched correctly to allow water runoff. The front wall is water-repellent but not designed to hold standing water.

8. Specifications

9. Warranty and Support

For information regarding warranty coverage, spare parts availability, or technical support, please refer to the official Fiamma website or contact your authorized Fiamma dealer. Keep your purchase receipt as proof of purchase.