Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Phiestina Chrome 8-Inch Widespread Bathroom Sink Faucet, Model WF008-5-C. Please read all instructions carefully before beginning installation and retain this manual for future reference.
Package Contents
Verify that all components are present before installation:
- Faucet Spout
- Two Handles
- Pop-Up Drain Assembly
- Hot and Cold Water Supply Lines
- Mounting Hardware
- Instruction Manual (this document)
Specifications
| Feature | Detail |
|---|---|
| Brand | Phiestina |
| Model Name | WF008-5-C |
| Recommended Uses | Bathroom |
| Mounting Type | Deck Mount |
| Finish Type | Chrome |
| Material | Copper (faucet body), Stainless Steel (handle) |
| Number of Handles | 2 |
| Hole Count | 3 |
| Special Features | Lead Free, Pop Up Drain, Tarnish Resistant, Water Saving System |
| Flow Rate | 1.2 Gallons Per Minute |
| Spout Design | Low Arc |
| Spout Height | 2.76 Inches (70 mm) |
| Spout Reach | 5.91 Inches (150 mm) |
| Overall Height | 4.72 Inches (120 mm) |
| Max Countertop Thickness | 1.38 Inches (35 mm) |
| Certifications | CEC, NSF LEAD FREE |
Pre-Installation Notice
Before you begin, ensure your sink meets the following requirements:
- Requires a 3-hole widespread installation.
- The distance between the center of the outer holes should be between 6 to 12 inches (152-305 mm).
- The maximum countertop thickness for installation is 1.38 inches (35 mm).
- Hole size diameter should be between 1.26"-1.38".
Refer to the product size diagram for detailed measurements:
Ensure your sink has an overflow if you plan to use the included pop-up drain.
Setup (Installation)
Follow these steps for proper installation of your widespread bathroom faucet:
- Prepare the Sink: Ensure the sink surface is clean and dry. Position the faucet body and handles into the pre-drilled holes on your sink or countertop.
- Secure the Faucet: From underneath the sink, thread the mounting nuts onto the faucet body and handle shanks. Hand-tighten, then use a basin wrench to secure them firmly. Do not overtighten.
- Connect Water Supply Lines: Attach the hot and cold water supply lines to the corresponding inlets on the faucet handles. The quick-connect hose simplifies this process. Ensure connections are tight to prevent leaks.
- Install Pop-Up Drain: Insert the pop-up drain assembly into the sink drain hole. Apply plumber's putty or silicone sealant around the flange for a watertight seal. Secure the drain body from underneath the sink with the provided nut and washer.
- Connect Drain to P-Trap: Connect the tailpiece of the pop-up drain to your existing P-trap assembly.
- Test for Leaks: Once all connections are made, turn on the main water supply and check for any leaks. Run water through the faucet for a few minutes to flush out any debris.
For a visual guide, please refer to the official installation video:
Operating Instructions
Your Phiestina widespread faucet features two handles for precise control over water temperature and flow.
- Cold Water: Turn the right handle counter-clockwise to activate cold water.
- Hot Water: Turn the left handle counter-clockwise to activate hot water.
- Temperature Control: Adjust the handles simultaneously to achieve your desired water temperature.
- Flow Control: The further you turn the handles, the greater the water flow.
The faucet is equipped with a German built-in aerator, designed to provide a gentle, foam-rich water stream that minimizes splashing for a comfortable user experience.
The included pop-up drain operates with a simple push mechanism:
- To Seal: Press the top of the drain stopper down to close the drain and retain water in the sink.
- To Drain: Press the top of the drain stopper again to open the drain and allow water to flow out.
Maintenance
Proper care will ensure the longevity and appearance of your Phiestina faucet.
- Cleaning: Clean the faucet regularly with a soft cloth and mild soap. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the chrome finish.
- Water Spots: The faucet's high-precision surface treatment is designed to reduce water spots. Wipe the faucet dry after each use to maintain its shine.
- Aerator Maintenance: If water flow decreases or becomes irregular, the aerator may be clogged. Unscrew the aerator from the spout, clean any debris, and rinse thoroughly before reattaching.
- Drain Maintenance: The pop-up drain includes a built-in strainer to collect hair and debris. Periodically remove the stopper and clean the strainer to prevent clogs.
Troubleshooting
If you encounter issues with your faucet, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Low Water Flow | Clogged aerator or partially closed shut-off valves. | Clean the aerator. Ensure hot and cold water shut-off valves are fully open. |
| Leaking from Spout | Worn ceramic cartridge. | Contact customer support for a replacement cartridge. |
| Leaking at Base of Faucet | Loose mounting nuts or improper seal. | Tighten mounting nuts. Reapply plumber's putty or silicone sealant if necessary. |
| Drain Not Sealing Properly | Debris in drain mechanism or improper installation. | Clean the drain stopper and strainer. Reinstall drain assembly ensuring proper seal. |
The faucet uses precise ceramic valves to prevent dripping and leaking, ensuring long-lasting durability.
Warranty Information
Your Phiestina faucet is covered by a 3-Year Limited Warranty. This warranty protects against manufacturing defects in material and workmanship under normal use. If a defect is found, Phiestina will provide a replacement or refund as per the warranty terms. Please retain your proof of purchase.
Customer Support
For assistance, questions, or warranty claims, please contact Phiestina customer support:
- Phone: 822-231-0800
- Website: www.phiestinafaucet.com
Phiestina provides 24-hour customer support to ensure your satisfaction.
