Introduction
The iHome iBT155 is a portable Bluetooth speaker designed for durability and versatile use. It features a rugged, waterproof, dustproof, sandproof, and shockproof design, making it suitable for various environments. The speaker also includes color-changing accent lighting, a built-in passive subwoofer for enhanced bass, and a long-lasting rechargeable battery.
What's in the Box
- iHome iBT155 Bluetooth Speaker
- USB charging cable
Product Features and Controls

The iHome iBT155 speaker, shown on a rock near water, emphasizes its robust 'Weather Tough' construction and extended battery life of over 20 hours.

This image displays the iHome iBT155 speaker with water splashing, highlighting its IP67 certification for being waterproof and sandproof, as well as floatable.
Top Panel Controls:
- Power Button: Press and hold to power on/off.
- Volume Up/Down Buttons: Adjust the speaker's audio output level.
- Play/Pause Button: Control media playback.
- LED Indicators: Small lights indicate pairing status (solid blue when paired) and charging status (flashing red when charging, off when fully charged).
Rear Panel Ports:
- Micro USB Port: Used for charging the speaker. Ensure the protective cover is fully closed for waterproofing.
- Reset Pin Hole: Insert a small pin to reset the device if needed.
Other Features:
- Carry Loop: A sturdy loop for easy portability, allowing attachment to a backpack or other gear.
- Durable Rubber Cabinet: Provides shockproof resistance and a secure grip.
Setup
1. Charging the Speaker:
- Open the protective cover on the rear of the speaker to access the Micro USB port.
- Connect the included USB charging cable to the speaker's Micro USB port and the other end to a USB power source (e.g., computer, USB wall adapter).
- The LED indicator will flash red while charging. It will turn off once fully charged.
- Once charging is complete, securely close the protective cover to maintain the speaker's waterproof rating.
2. Bluetooth Pairing:
- Ensure the speaker is powered off.
- Press and hold the Power button until the speaker powers on and enters pairing mode. You may hear an audible prompt indicating "pairing mode." The LED indicator will flash blue.
- On your Bluetooth-enabled device (smartphone, tablet, laptop), go to the Bluetooth settings.
- Select "iHome iBT155" from the list of available devices.
- Once successfully paired, the speaker will indicate a successful connection, and the LED indicator will turn solid blue.
Operating the Speaker
Power On/Off:
- Press and hold the Power button on the top panel to turn the speaker on or off.
Volume Control:
- Press the Volume Up (+) or Volume Down (-) buttons on the top panel to adjust the audio volume.
Media Playback:
- Press the Play/Pause button to start or pause audio playback.
Color Changing Accent Lighting:

The iHome iBT155 speaker is shown with its accent lighting active, demonstrating how the lights can pulse in sync with music for a full spectrum effect.

This image features the iHome iBT155 speaker positioned beside a smartphone, highlighting its ability to stream audio wirelessly via Bluetooth.
- The speaker features 5 modes for its color-changing accent lighting: Slow Blend, Fast Blend, Favorite Color, Pulse-to-music, and Preset Pulsing. Refer to the full user manual for specific button presses to cycle through these modes.
Built-in Speakerphone and Voice Control:
- The speaker includes a built-in speakerphone with digital echo canceling. Use the Talk/End button (often integrated with Play/Pause) to manage calls.
- Audio Caller ID function is compatible with Apple iOS 10 and later.
- Voice control function works with Siri and Google Assistant to play music, check weather, and more.
Maintenance
- Always ensure the protective cover for the charging port is securely closed when not charging to maintain the speaker's waterproof, dustproof, and sandproof integrity.
- Clean the speaker with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners.
- Store the speaker in a cool, dry place when not in use for extended periods.
Troubleshooting
No Power:
- Ensure the speaker is fully charged. Connect it to a power source using the USB charging cable.
Pairing Issues:
- Make sure the speaker is in pairing mode (LED flashing blue).
- Ensure Bluetooth is enabled on your device and it is within range (up to 100 feet).
- If issues persist, try resetting the speaker by inserting a small pin into the reset pin hole on the rear panel.
Poor Sound Quality:
- Check the volume levels on both the speaker and your connected device.
- Ensure there are no obstructions between the speaker and your device that could interfere with the Bluetooth signal.
Specifications

A transparent view of the iHome iBT155 speaker highlights its internal components, specifically the passive subwoofer designed for powerful, enhanced sound.

This diagram illustrates the key features and dimensions of the iHome iBT155 speaker, including Bluetooth connectivity, rechargeable mega battery, passive subwoofer, and an elastic carry loop for portability.
| Feature | Detail |
|---|---|
| Model Number | IBT155 |
| Dimensions | 3.39 x 3.39 x 3.94 inches |
| Item Weight | 10.2 ounces (0.64 Pounds) |
| Water Resistance Level | IP67 Certified (Waterproof, Dustproof, Sandproof, Floatable) |
| Shockproof | Military Rated MIL-STD 810G Standard |
| Battery Life | Up to 15-20 hours of continuous audio playback |
| Bluetooth Range | Up to 100 feet |
| Speaker Output Power | 10 Watts |
| Audio Output Mode | Stereo |
| Special Features | Color Changing Accent Lighting (5 modes), Built-in Speakerphone with Digital Echo Cancelling, Voice Control (Siri/Google Assistant), Passive Subwoofer |
Warranty and Support
The iHome iBT155 Bluetooth Speaker comes with a limited warranty. For detailed warranty information, product support, or service inquiries, please refer to the official iHome website or contact iHome customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.
Manufacturer: iHome