HFBTE YG60 60-Degree Gloss Meter User Manual

1. Introduction

The HFBTE YG60 Gloss Meter is a precision instrument designed for measuring the gloss of various surfaces. It operates at a 60-degree measuring angle, conforming to international standards ISO2813, ASTM523, and GB/T9754. This device is suitable for applications in paints, coatings, plastics, ink, rubber, printing, paper, glass, hardware, ceramics, and marble. It features a 2.3-inch display, multiple measurement modes, and data storage capabilities with PC software for comprehensive analysis.

2. Safety Information

• Do not expose the device to extreme temperatures or humidity.
• Avoid dropping or subjecting the device to strong impacts.
• Keep the measurement aperture clean and free from dust or debris.
• Use only the specified battery type (AA) and ensure correct polarity during installation.
• Do not attempt to disassemble or repair the device yourself. Contact qualified service personnel.

3. Package Contents

Verify that all items are present in the package:

• HFBTE YG60 Gloss Meter (Main Unit)
• USB Cable
• User Manual
• Calibration Plate
• QC Software (for PC)
• Carrying Case
• Cleaning Cloth

Figure 3.1: Contents of the HFBTE YG60 Gloss Meter package. Note: Batteries are not included.

4. Product Overview

4.1. External Structure

Figure 4.1: Labeled diagram of the YG60 Gloss Meter, highlighting the screen, operation buttons, measurement button, battery cover, USB interface, and calibration box.

• Display Screen: 2.3-inch white and black screen for displaying measurement data and menu options.
• Operation Buttons: Navigation buttons (Up, Down, Left, Right) and an Enter button for menu interaction.
• Measurement Button: Initiates a gloss measurement.
• Battery Compartment: Houses the AA battery.
• USB Interface: For connecting to a PC for data transfer and charging (if using rechargeable batteries).
• Calibration Box: Integrated into the device for convenient calibration.

Figure 4.2: Detailed views of key features: 2.3-inch screen, USB interface, 60°:9X15 measuring area, and the measurement button.

5. Setup

5.1. Battery Installation

1. Locate the battery compartment on the device.
2. Open the battery cover.
3. Insert one AA dry-cell battery, ensuring correct polarity.
4. Close the battery cover securely.

Figure 5.1: The battery compartment of the YG60 Gloss Meter, ready for battery insertion.

5.2. Powering On/Off

To power on the device, press and hold the measurement button until the screen illuminates. To power off, press and hold the measurement button again until the screen turns off.

6. Operating Instructions

6.1. Basic Measurement

1. Ensure the device is powered on.
2. Place the measurement aperture of the gloss meter firmly and flatly on the surface of the sample to be measured.
3. Press the measurement button gently. The gloss value will be displayed on the screen.

6.2. Measurement Modes

The YG60 Gloss Meter offers multiple measurement modes to suit various needs:

• Basic Mode: For single, quick measurements.
• Statistic Mode: Calculates statistical data (e.g., average, min, max) from multiple measurements.
• Continuous Mode: Takes continuous measurements over a period.
• QC Mode: For quality control applications, often involving pass/fail criteria.

Navigate through the menu using the operation buttons to select the desired measurement mode.

7. Calibration

The YG60 Gloss Meter features an auto-calibration function. For accurate measurements, regular calibration using the provided calibration plate is essential.

1. Ensure the calibration plate is clean and free from dust or scratches.
2. Place the gloss meter onto its integrated calibration box.
3. Access the calibration menu via the operation buttons.
4. Follow the on-screen prompts to initiate and complete the auto-calibration process.

Figure 7.1: The YG60 Gloss Meter with its calibration plate detached, revealing the measurement optics. The calibration plate is crucial for maintaining measurement accuracy.

8. Data Management

The device can store up to 35,000 data points across its various modes (Basic & Statistic: 1500; Continuous: 10000; QC: 10000). To transfer data to a PC:

1. Connect the gloss meter to your PC using the provided USB cable.
2. Install the included QC software on your computer.
3. Launch the software and follow its instructions to download and manage your measurement data. The software also offers extended functions for quality reporting.

9. Maintenance

• Cleaning: Regularly clean the measurement aperture and the calibration plate with the provided cleaning cloth or a soft, lint-free cloth. Avoid using abrasive cleaners or solvents.
• Storage: When not in use, store the gloss meter in its protective carrying case in a dry, dust-free environment.
• Battery Care: Remove the battery if the device will not be used for an extended period to prevent leakage and damage.

10. Troubleshooting

• Device not powering on: Check battery installation and ensure the battery has sufficient charge.
• Inaccurate readings: Perform calibration using the calibration plate. Ensure the measurement aperture and sample surface are clean.
• Data transfer issues: Verify USB cable connection and ensure the QC software is correctly installed and running on the PC.
• Screen not responding: Try restarting the device by powering it off and on. If the issue persists, contact customer support.

11. Specifications

12. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the contact details provided with your purchase documentation or visit the official HFBTE website. Keep your purchase receipt as proof of purchase for warranty claims.