1. Introduction to the Epson EcoTank ET-4760
The Epson EcoTank ET-4760 is a wireless color all-in-one supertank printer designed for efficiency and convenience. It features cartridge-free printing with high-capacity, easily refillable ink tanks, reducing the need for frequent ink cartridge replacements. This device integrates printing, scanning, copying, and faxing functionalities, making it suitable for various home and office tasks. Key features include a 2.4-inch color touchscreen, a 30-sheet Automatic Document Feeder (ADF), automatic 2-sided printing, and versatile connectivity options including Ethernet and Wi-Fi.
Image: Front view of the Epson EcoTank ET-4760 printer with documents in the paper tray and ADF.
2. Initial Setup
2.1 Unpacking the Printer
Carefully remove the printer from its packaging. Ensure all protective tapes and materials are removed from the exterior and interior of the printer. Verify that all components are present:
- Epson EcoTank ET-4760 all-in-one printer
- Manual and CD-ROM for product setup
- Power cord
- One bottle of 502 Black ink (127 mL)
- One bottle each of 502 Cyan, Magenta, Yellow ink (70 mL)
Image: Diagram showing the items included in the printer's packaging.
2.2 Filling the Ink Tanks
The EcoTank ET-4760 uses large, refillable ink tanks. Follow these steps to fill them:
- Open the ink tank unit cover on the side of the printer.
- Open the cap for the black ink tank.
- Uncap the black ink bottle. The EcoFit bottles are uniquely keyed to fit only the correct color tank.
- Insert the ink bottle into the filling port. The ink will automatically start filling the tank. Do not squeeze the bottle.
- Once the tank is full, the ink flow will stop automatically. Remove the bottle and securely close the ink tank cap.
- Repeat the process for the Cyan, Magenta, and Yellow ink tanks.
Important: Use only genuine Epson ink bottles to ensure optimal print quality and prevent damage not covered under warranty.
Image: Close-up of the EcoFit ink bottle being inserted into the printer's ink tank.
2.3 Power On and Initial Configuration
Connect the power cord and turn on the printer. Follow the on-screen instructions on the 2.4-inch color touchscreen to complete the initial setup, including language selection, date, and time settings. The printer will then initiate an ink charging process, which may take several minutes.
2.4 Network Setup (Wired and Wireless)
The ET-4760 supports both wired Ethernet and wireless (Wi-Fi) connectivity.
- For Wired Connection: Connect an Ethernet cable from your router or network hub to the printer's Ethernet port.
- For Wireless Connection: On the printer's touchscreen, navigate to the Wi-Fi setup menu. Select your network (SSID) and enter the password.
2.5 Software Installation
Insert the provided CD-ROM into your computer and follow the installation wizard. Alternatively, download the latest drivers and software from the official Epson support website. This software includes drivers for printing, scanning, and faxing, as well as utilities for printer management.
3. Operating the Printer
3.1 Loading Paper
The printer features a 250-sheet paper tray. Pull out the paper cassette, adjust the side guides to fit your paper size, and load paper print-side down. Ensure the paper stack does not exceed the maximum fill line.
Image: The printer with its paper tray extended and paper loaded, ready for printing.
3.2 Printing Documents and Photos
From your computer or mobile device, select the Epson ET-4760 as your printer. Adjust print settings such as paper type, print quality (standard, draft, high), and color options. The printer supports automatic 2-sided printing for paper-saving.
3.3 Scanning Documents
You can scan documents using the flatbed scanner or the 30-sheet Automatic Document Feeder (ADF).
- Flatbed Scanning: Place a single document face down on the scanner glass.
- ADF Scanning: Load multiple documents face up into the ADF.
Initiate the scan from your computer using Epson Scan software or directly from the printer's control panel to a connected device or cloud service.
3.4 Copying Documents
Place your document on the scanner glass or in the ADF. On the printer's touchscreen, select 'Copy'. You can adjust settings such as number of copies, color/black & white, and paper size before starting the copy process.
3.5 Sending Faxes
Load your document into the ADF or place it on the scanner glass. On the touchscreen, select 'Fax'. Enter the recipient's fax number and press 'Start'. The printer supports various fax settings, including resolution and delayed sending.
3.6 Mobile Printing and Voice-Activated Printing
The Epson Smart Panel App allows you to print, scan, and check printer status from your smartphone or tablet. The ET-4760 also supports voice-activated printing through compatible devices like Amazon Alexa and Google Assistant. Refer to the Epson website for device compatibility and setup instructions for voice commands.
4. Maintenance
4.1 Checking and Refilling Ink Levels
Visually inspect the ink tanks on the front of the printer to monitor ink levels. When an ink tank is low, refill it using the corresponding EcoFit ink bottle as described in Section 2.2. Do not wait for the tank to be completely empty before refilling.
4.2 Performing Print Head Cleaning
If print quality declines (e.g., missing lines, faded colors), perform a print head cleaning. This can be done through the printer's control panel menu or via the Epson printer utility software on your computer. Regular cleaning helps maintain optimal print quality.
4.3 Replacing the Maintenance Box
The printer has a user-replaceable maintenance box that collects waste ink during cleaning cycles. When the printer indicates that the maintenance box is full, it must be replaced. Follow the instructions on the printer's screen or in the full user manual for replacement procedures. A new maintenance box can be purchased separately.
5. Troubleshooting Common Issues
This section addresses common problems you might encounter with your Epson ET-4760 printer.
- Printer Not Responding:
Ensure the printer is powered on and connected to the network (Wi-Fi or Ethernet). Check network cables and Wi-Fi signal strength. Restart both the printer and your computer/router. - Poor Print Quality (Streaks, Fading, Incorrect Colors):
Check ink levels and refill if necessary. Perform a print head cleaning and nozzle check from the printer's maintenance menu. Ensure you are using appropriate paper settings for your print job. - Paper Jams:
Carefully remove any jammed paper from the paper tray, output tray, or inside the printer. Refer to the printer's display for specific jam locations. Avoid tearing the paper. - Connectivity Issues:
For Wi-Fi, verify your network password and ensure the printer is within range of your router. For Ethernet, check the cable connection. Try restarting your router. - Error Messages on Display:
Note the error code or message and consult the full user manual or Epson support website for specific solutions. Common errors relate to paper type, ink levels, or maintenance box status. - Double-Sided Printing Alignment Issues:
If double-sided prints are misaligned, ensure paper guides are correctly set in the paper tray. Perform a print head alignment from the printer's maintenance menu. - Slow Scanning or Low Scan Quality:
For higher quality scans, increase the DPI (dots per inch) setting in your scanning software. Be aware that higher DPI settings will increase scan time. Ensure the scanner glass is clean.
6. Technical Specifications
| Feature | Specification |
|---|---|
| Product Dimensions | 13.7"D x 14.8"W x 9.1"H |
| Printing Technology | Inkjet (PrecisionCore Heat-Free) |
| Printer Output | Color |
| Max Print Speed (Monochrome) | 15 ppm |
| Max Print Speed (Color) | 8 ppm |
| Max Print Resolution (Color/B&W) | 1200 x 2400 dpi |
| Scanner Type | Document (Flatbed & ADF) |
| Max Input Sheet Capacity | 250 sheets (main tray), 30 sheets (ADF) |
| Duplex Printing | Automatic |
| Connectivity Technology | Ethernet, Wi-Fi |
| Control Method | Touch (2.4" Color Touchscreen) |
| Included Components | EcoTank ET-4760, manual, CD-ROM, power cord, 502 ink bottles |
| Item Weight | 15 pounds |
Image: Printer dimensions for placement and space planning.
7. Warranty and Support
7.1 Limited Warranty
The Epson EcoTank ET-4760 typically comes with a 12-month standard limited warranty or 50,000 plain paper sheets (whichever occurs first). An additional 12-month extended service plan (total of 24 months or 50,000 plain paper sheets) may be available upon product registration and use of genuine Epson ink bottles. Refer to your product documentation or the Epson website for complete warranty details and terms.
Image: The Epson ET-4760 printer highlighting its 2-year product protection with registration.
7.2 Customer Support
For further assistance, technical support, or to order replacement parts and ink, please visit the official Epson support website or contact their customer service. Ensure you have your printer model number (ET-4760) and serial number ready when contacting support.
You can find more information and support resources at the Epson Store.
