Introduction
This manual provides instructions for the Easytry123 RM-ANP105-149224811 replacement remote control. This remote is designed to operate various Sony Sound Bar Audio Home Theater Systems, including models HT-CT370, SA-CT770, SA-CT370, HT-CT660, and SA-CT660.
Important Note: As a replacement item, this remote control may not support all functions of your original device's remote. Please verify compatibility with your specific model before use.
Setup
Battery Installation
The remote control requires two (2) AA batteries for operation. Batteries are not included with the remote control.
- Locate the battery compartment on the back of the remote control.
- Slide the battery compartment cover downwards and remove it.
- Insert two AA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Replace the battery compartment cover by sliding it back into position until it clicks securely.
Figure 1: Back of the remote control with the battery compartment open.
Operating Instructions
This replacement remote control is designed for ease of use. Point the remote directly at your Sony Sound Bar Audio Home Theater System for optimal performance.
Figure 2: Front view of the remote control with button layout.
Key Functions:
- Power (TV I/O, Muting Input): Turns the connected device on or off.
- TV VOL (+/-): Adjusts the television volume.
- TV CH (+/-): Changes television channels.
- INPUT: Selects the input source for the sound bar.
- VOL (+/-): Adjusts the sound bar volume.
- MUTING: Mutes or unmutes the sound.
- SOUND FIELD (STD, MUSIC, MOVIE, GAME, STEREO): Selects various audio sound modes.
- DISPLAY: Toggles display information on the sound bar.
- RETURN: Navigates back in menus.
- Navigation Pad (Up, Down, Left, Right, Enter): Used for menu navigation and selection.
- BLUETOOTH (PAIRING, AMP MENU): Controls Bluetooth functions and amplifier menu settings.
- Playback Controls (Play, Pause, Stop, Skip): Standard media playback functions.
Maintenance
Battery Replacement
Replace batteries when the remote control's response becomes sluggish or stops working. Always replace both AA batteries at the same time with new ones. Do not mix old and new batteries, or different types of batteries.
Cleaning
To clean the remote control, use a soft, dry cloth. Do not use liquid cleaners, abrasive pads, or chemical solvents, as these can damage the remote's surface or internal components.
Troubleshooting
- Remote not responding:
- Ensure batteries are inserted correctly with the correct polarity.
- Replace old batteries with new AA batteries.
- Ensure there are no obstructions between the remote control and the sound bar's sensor.
- Confirm you are pointing the remote directly at the sound bar.
- Some functions do not work:
- As a replacement remote, it may not support all advanced or specific functions of your original device. This is normal for universal or replacement remotes.
- Refer to your sound bar's original manual for specific function details.
Specifications
| Model Number | RM-ANP105-149224811 |
| Brand | Easytry123 |
| Compatible Devices | Sony HT-CT370, SA-CT770, SA-CT370, HT-CT660, SA-CT660 Sound Bar Audio Home Theater Systems |
| Battery Type | 2 x AA batteries (not included) |
| Color | Black |
| Special Feature | Ergonomic design |
| Max Number of Supported Devices | 1 |
Warranty and Support
This product is a replacement remote control. For specific warranty information or technical support, please contact the seller or retailer from whom the product was purchased. Keep your purchase receipt as proof of purchase.
