Renegade U1-35-WS Sealed Maintenance-Free Battery User Manual

Introduction

The Renegade U1-35-WS is a 12 Volt, 35 Amp rechargeable sealed lead acid battery designed for reliable performance. Utilizing Absorbent Glass Mat (AGM) technology, this battery offers superior power and a completely sealed, liquid-free, non-spillable construction, allowing safe operation in any position. It is engineered for high energy density and features a rugged, impact-resistant ABS case with an integrated carrying handle for ease of movement.

Key features of the U1-35-WS battery include:

• Ready to use out of the box, completely sealed and non-spillable, requiring no acid filling.
• Compact dimensions: 7.80" Length x 5.20" Width x 6.22" Height (7.00" Height over terminals).
• Delivers 400+ Cold Cranking Amps for strong starting power.
• U.L. recognized under file number MH 60882, ensuring safety standards.

Product Overview and Specifications

Physical Characteristics

Figure 1: Front view of the Renegade U1-35-WS Sealed Maintenance-Free Battery, showcasing its black casing, red top, and nut & bolt terminals.

Figure 2: Diagram illustrating the dimensions of the Renegade U1-35-WS battery, with a length of 7.8 inches, width of 5.2 inches, and height of 6.22 inches (7.00 inches over terminals).

Technical Specifications

Setup and Installation

The Renegade U1-35-WS battery is shipped ready for immediate use. Please follow these guidelines for proper installation:

1. Unpacking: Carefully remove the battery from its packaging. Inspect for any signs of damage during transit.
2. Terminal Preparation: Ensure the nut & bolt terminals are clean and free of corrosion. If necessary, clean them with a wire brush.
3. Connection: Connect your existing cables and connectors to the battery terminals. It is crucial to re-use your original cables and connectors as only the battery is supplied. Ensure connections are secure and tight to prevent arcing and ensure optimal power transfer.
4. Orientation: The valve-regulated, spill-proof construction allows for safe operation in any position. However, for best practice and stability, install the battery in a secure, upright position if possible.

Operating Guidelines

This sealed maintenance-free battery is designed for consistent performance in compatible applications such as commercial walk-behind mowers (SCAG SW/SWZ/SWU/SWZU models). Once installed, the battery will provide power as required by your equipment. No specific operational steps are needed for the battery itself beyond proper installation and adherence to maintenance schedules.

Maintenance and Storage

Proper care is essential to maximize the life expectancy of your Renegade U1-35-WS battery. As with all rechargeable batteries, consistent maintenance is key:

• Regular Charging: When the battery is not in use, it must be charged at least every 3 months. If used in vehicles equipped with security alarms or other constant drains, more frequent charging may be necessary.
• Charger Type: Use an automatic battery charger or a float-type charger. The charger's output should not exceed 1.5 Amps.
• Terminal Inspection: Periodically check the battery terminals for cleanliness and ensure all connections remain tight and secure. Loose or corroded connections can impair performance and shorten battery life.
• Storage Temperature: Store the battery in an environment where the temperature is consistently between 62°F and 82°F (16.7°C and 27.8°C). Extreme temperatures can negatively impact battery health.
• Sealed Unit: This is a sealed battery and should never be opened or tampered with. Attempting to open the battery will void any potential warranty and can be hazardous.

Failure to adhere to these guidelines will shorten the life expectancy of the battery.

Troubleshooting

If you experience issues with your Renegade U1-35-WS battery, consider the following common troubleshooting steps:

• Battery Not Holding Charge: Ensure you are following the recommended charging schedule, especially when the battery is not in active use. Verify that your charger is functioning correctly and is an automatic or float type not exceeding 1.5 Amps.
• Low Power Output: Check all terminal connections to ensure they are clean and securely fastened. Loose or corroded connections can significantly reduce power delivery.
• Shortened Life: Review the maintenance and storage guidelines. Exposure to extreme temperatures, infrequent charging, or improper charging methods can lead to premature battery degradation.
• Physical Damage: Inspect the battery case for any cracks or swelling. If physical damage is present, discontinue use and consider replacement.

Safety Information

Your Renegade U1-35-WS battery is designed with safety in mind. Please observe the following safety precautions:

• Sealed Unit: This battery is completely sealed and non-spillable. Do not attempt to open, disassemble, or tamper with the battery casing. Doing so can expose you to internal components and may cause injury or damage.
• No Acid Filling: The AGM technology means there is no free liquid acid inside, eliminating the need for acid filling and reducing the risk of spills.
• Ventilation: While sealed, ensure the battery is used in a well-ventilated area to allow for any potential gas dissipation, especially during charging.
• Transport: The battery is approved for transport by air and is D.O.T., I.A.T.A., F.A.A., and C.A.B. certified. Follow all applicable regulations when transporting.
• Handling: Use the integrated ABS carrying handle for safe and easy movement of the battery.

Warranty and Support

For specific warranty information regarding your Renegade U1-35-WS battery, please refer to the documentation provided at the time of purchase or visit the official Renegade product support website. For technical assistance or further inquiries, please contact Renegade customer service through their official channels.