Product Overview
The Dancover Pavilion Osiris 3x4m is a robust outdoor structure designed to provide shade and shelter in your garden or outdoor space. It features a durable metal frame, a waterproof canopy, and includes integrated mosquito nets and curtains for enhanced comfort and protection from elements and insects. This manual provides essential information for assembly, operation, maintenance, and troubleshooting to ensure safe and effective use of your pavilion.
Figure 1: Full view of the Dancover Pavilion Osiris 3x4m with curtains and mosquito nets.
Safety Instructions
Read all instructions carefully before assembly and use. Failure to follow these instructions may result in injury or damage to the product.
- Ensure all components are present and undamaged before beginning assembly.
- Assemble the pavilion on a flat, level surface.
- Securely anchor the pavilion to the ground using appropriate stakes or weights, especially in windy conditions.
- Do not use the pavilion during strong winds, heavy rain, or snow. Disassemble or secure it properly to prevent damage.
- Keep all flame and heat sources away from the pavilion fabric.
- Regularly inspect the frame and fabric for wear and tear. Replace damaged parts immediately.
- Adult assembly is required. Keep children away during assembly.
Parts List (Typical Components)
While specific part numbers are not provided, a typical Dancover Pavilion Osiris 3x4m includes the following main components:
- Main Frame Poles (legs, roof beams)
- Connectors and Joints
- Canopy Fabric (main roof and smaller upper roof)
- Mosquito Nets (four sides)
- Curtains (four sides, with tie-backs)
- Ground Stakes/Anchors
- Assembly Hardware (bolts, nuts, washers, tools if included)
Setup and Assembly
Assembly requires at least two adults. Follow these general steps for setting up your pavilion:
- Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out and identify each part according to the included parts diagram (if available). Verify all parts are present and undamaged.
- Assemble the Base Frame: Connect the horizontal base poles to the vertical leg poles using the provided connectors and hardware. Ensure all connections are secure.
- Erect the Frame: With assistance, carefully lift and connect the upper roof frame components to the leg poles. Secure all roof beams and connectors.
- Install the Canopy: Drape the main canopy fabric over the assembled roof frame. Secure it to the frame using the integrated fasteners (e.g., Velcro straps, ties). Ensure the canopy is taut and evenly distributed. Install the smaller upper canopy (ventilation cap) if applicable.
- Attach Mosquito Nets and Curtains: Hang the mosquito nets and curtains from the designated attachment points on the frame. These typically slide along a rail or attach with hooks/rings.
Figure 2: Interior view showing the integrated mosquito nets and curtains.
- Secure the Pavilion: Once fully assembled, use the provided ground stakes or other anchoring methods to secure the pavilion's legs to the ground. This is crucial for stability and safety.
Operating Instructions
The Dancover Pavilion Osiris is designed for ease of use:
- Curtains and Mosquito Nets: The pavilion features both mosquito nets and privacy curtains. These can be independently opened or closed. Use the integrated zippers to close them fully for privacy or insect protection.
Figure 3: Detail of a curtain tie-back, allowing curtains to be neatly secured when open.
- Securing Curtains: When not in use, the curtains and mosquito nets can be tied back to the pavilion legs using the provided tie-backs to keep them neatly open.
- Ventilation: The pavilion's design, including the upper ventilation cap, allows for air circulation while providing shelter.
Maintenance
Proper maintenance will extend the life of your pavilion:
- Cleaning: Clean the canopy and curtains with mild soap and water. Do not use harsh chemicals or abrasive cleaners. Rinse thoroughly and allow to air dry completely before storage.
- Frame Care: Wipe down the metal frame with a damp cloth to remove dirt and debris. Inspect for rust or corrosion, especially at joints.
- Inspection: Regularly check all connections, bolts, and stakes to ensure they are tight and secure. Inspect fabric for tears or excessive wear.
- Winter Storage: For prolonged periods of non-use or during winter months, it is highly recommended to disassemble the pavilion and store it in a dry, protected area to prevent damage from harsh weather conditions.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Pavilion is unstable or wobbly. | Not properly anchored; loose connections; uneven ground. | Ensure all legs are securely staked or weighted. Check and tighten all frame connections. Move to a level surface. |
| Water pooling on canopy. | Canopy not taut enough; improper assembly; heavy rainfall. | Re-adjust canopy to ensure it is stretched tightly. Verify correct frame assembly. During heavy rain, it is advisable to remove the canopy or disassemble the pavilion. |
| Zippers on nets/curtains stick. | Dirt or debris in zipper teeth; lack of lubrication. | Clean zipper teeth with a brush. Apply a silicone-based lubricant specifically designed for zippers. |
Specifications
- Dimensions (Length x Width): 4 meters x 3 meters (approx. 13.1 ft x 9.8 ft)
- Material Type: Metal (Frame), Fabric (Canopy, Curtains, Nets)
- Frame Material: Aluminum
- Waterproof Level: Waterproof
- Assembly Required: Yes
- Color: Sand (as per product title)
Warranty and Support
For information regarding warranty coverage, replacement parts, or technical support, please refer to the contact information provided by Dancover at the time of purchase or visit the official Dancover website. Keep your proof of purchase for warranty claims.
For further assistance, you may also contact the retailer where the product was purchased.
