Introduction
This manual provides essential instructions for the proper use and maintenance of your Easytry123 replacement remote control. This remote is designed to function as a direct replacement for specific Midea air conditioner models without requiring any programming.
Please note that this remote control is not universal and is specifically compatible with the Midea models listed above. It does not include batteries or a separate printed manual.
Setup
1. Battery Installation
The remote control requires two (2) AAA batteries (not included) for operation. Follow these steps to install them:
- Locate the battery compartment cover on the back of the remote control.
- Slide the cover downwards or press the latch (if present) to open the compartment.
- Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Slide the battery compartment cover back into place until it clicks securely.
Image: Back view of the remote control, highlighting the battery compartment. The label indicates 'TYPE: RG36A/BGEF' and advises removing batteries for long-term storage.
2. Initial Use (No Programming Required)
This replacement remote control is designed for immediate use with compatible Midea air conditioner models. No programming or pairing steps are necessary. Once batteries are installed, the remote is ready to operate your air conditioner.
Operating Instructions
To operate your air conditioner, point the remote control directly at the indoor unit's receiver. Ensure there are no obstructions between the remote and the air conditioner.
Image: Front view of the remote control, showing the LCD screen and various function buttons.
Button Functions:
- ON/OFF: Powers the air conditioner on or off.
- TEMP +/-: Adjusts the desired temperature setting.
- MODE: Cycles through operating modes (e.g., Cool, Heat, Fan, Dry, Auto).
- SWING (Vertical): Controls the vertical louver movement.
- SWING (Horizontal): Controls the horizontal louver movement.
- FAN SPEED: Adjusts the fan speed (e.g., Low, Medium, High, Auto).
- SILENCE / FP: Activates silent operation mode or Freeze Protection mode.
- TIMER ON/OFF: Sets or cancels the timer for automatic power on/off.
- INTELLIGENT EYE: Activates the intelligent eye sensor for optimized comfort and energy saving.
- SLEEP / FRESH: Activates sleep mode or fresh air function.
- TURBO / CLEAN: Engages turbo cooling/heating or self-clean function.
- LED: Turns the display light on the indoor unit on or off.
- FOLLOW ME: Activates the 'Follow Me' function, sensing temperature at the remote's location.
- LOCK: Locks the remote control buttons to prevent accidental changes.
- RESET: Resets the remote control settings.
Maintenance
Battery Replacement
Replace batteries when the remote control's range decreases or if the display becomes dim or unresponsive. Always replace both batteries simultaneously with new AAA batteries. Do not mix old and new batteries, or different types of batteries.
Cleaning
Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners, sprays, or abrasive materials, as these can damage the remote's surface or internal components.
Storage
If the remote control will not be used for an extended period, remove the batteries to prevent leakage and potential damage to the device.
Troubleshooting
- Remote not responding:
- Ensure fresh AAA batteries are correctly installed.
- Check for any obstructions between the remote and the air conditioner's indoor unit.
- Verify that the remote is pointed directly at the air conditioner's receiver.
- Confirm that your air conditioner model is listed as compatible with this remote.
- Buttons not working:
- Ensure the remote is not in 'LOCK' mode. If it is, press the 'LOCK' button again to unlock.
- Check the buttons for any physical damage or stickiness.
- Intermittent operation:
- Replace batteries with a fresh set.
- Ensure no strong light sources (like direct sunlight) are interfering with the infrared signal.
Specifications
| Brand | Easytry123 |
| Model Number | Easytry6171 |
| Compatible Devices | Midea Air Conditioners (Specific models listed in title) |
| Connectivity Technology | Infrared (IR) |
| Controller Type | Button Control |
| Maximum Range | 10 Meters (approx. 33 feet) |
| Batteries Required | 2 x AAA (not included) |
| Item Weight | 80 Grams |
| Special Feature | No Programming Required, Not universal |
Warranty Information
This product comes with a 90-day quality warranty. For any issues covered under this warranty, a hassle-free return or replacement process is available. Please refer to your purchase documentation or contact the seller for specific details regarding warranty claims.
Customer Support
If you encounter any problems or have questions regarding your Easytry123 replacement remote control that are not addressed in this manual, please contact the seller directly through your purchase platform for assistance. Provide your order details and a clear description of the issue to facilitate a quick resolution.