Wildgame Innovations Silent CAM 30MP LIGHTSOUT Trail Camera (Model WGICM0619) User Manual

Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your Wildgame Innovations Silent CAM 30MP LIGHTSOUT Trail Camera, model WGICM0619. Please read this manual thoroughly before using your camera to ensure optimal performance and longevity.

Figure 1: Front view of the Wildgame Innovations Silent CAM 30MP LIGHTSOUT Trail Camera. The camera features a textured, camouflage-like casing with a central lens and multiple infrared emitters for night vision.

Setup

1. Battery Installation

The camera requires 8 AA batteries (not included). For best performance, use high-quality alkaline or lithium batteries. Ensure correct polarity when inserting batteries.

1. Open the camera housing latch.
2. Locate the battery compartment on the right side of the opened camera.
3. Insert 8 AA batteries, matching the positive (+) and negative (-) indicators within the compartment.
4. Close the battery compartment cover securely.

Figure 2: The camera opened, revealing the control panel on the left and the battery compartment on the right, designed for 8 AA batteries.

2. SD Card Installation

A Class 4 or higher SD card (up to 32GB, not included) is required to store images and videos.

1. With the camera open, locate the SD card slot at the bottom of the control panel.
2. Insert the SD card with the metal contacts facing up until it clicks into place.
3. To remove, press the card in until it clicks, then release. The card will eject slightly.

3. Mounting the Camera

The camera can be mounted to a tree or post using the included strap.

1. Thread the mounting strap through the slots on the back of the camera.
2. Secure the camera to a sturdy object, such as a tree, at the desired height and angle.
3. Ensure the camera is stable and pointed towards the area you wish to monitor.

Figure 3: A person demonstrating how to mount the trail camera to a tree using the provided strap, ensuring it is securely positioned.

4. Initial Power-On and Basic Settings

After installing batteries and an SD card, power on the camera and configure essential settings.

1. Press the POWER button on the control panel. The internal display will illuminate.
2. Use the navigation buttons (UP, DOWN, LEFT, RIGHT) and the OK button to navigate the menu.
3. Set the TIME / DATE first to ensure accurate timestamps on your recordings.
4. Configure the following settings as needed:
   • PIR MODE: Choose between FLEXTIME or BOTH.
   • FLEXTIME: Set detection schedule (e.g., DUSK/DAWN, ALL DAY).
   • PIR MODE: Select STILL for photos, VIDEO for videos, or BOTH.
   • PIR ACTIVE: Define active hours (24HR, DAY, NIGHT).
   • PIR SENSE: Adjust motion sensor sensitivity (HI, MED, LO).
   • EXPOSURE: Set image exposure (HI, MED, LO).
   • STILL RES: Choose still image resolution (HI, MED, LO).
   • PIC / VIDEO: Select REGULAR or WIDE for image/video format.
   • DELAY: Set the delay between triggers (e.g., 5s, 15s, 30s, 1m, 5m, 10m).

Figure 4: A detailed view of the camera's internal display, illustrating the menu options for configuring time, date, PIR mode, sensitivity, resolution, and delay settings.

Operating Instructions

1. Camera Modes

The Silent CAM 30MP LIGHTSOUT offers three primary operating modes:

• STILL: Captures still images when motion is detected.
• VIDEO: Records video clips when motion is detected.
• BOTH: Captures a still image followed by a video clip when motion is detected.

Select your desired mode from the PIR MODE option in the settings menu.

2. Motion Detection (PIR)

The Passive Infrared (PIR) sensor detects heat and motion. Adjusting the PIR SENSE setting controls the sensitivity of this sensor:

• HI (High): Most sensitive, detects motion at greater distances or with smaller movements. May result in more false triggers from environmental factors.
• MED (Medium): Balanced sensitivity, suitable for most applications.
• LO (Low): Least sensitive, detects motion at closer distances or with larger movements. Reduces false triggers in windy conditions or areas with dense foliage.

The DELAY setting determines the waiting period before the camera can trigger again after an initial detection. Shorter delays capture more events, while longer delays conserve battery life and SD card space.

3. Retrieving Media

To access your captured images and videos:

• Power off the camera.
• Remove the SD card from its slot.
• Insert the SD card into a compatible card reader connected to a computer or other viewing device.
• Browse the files on the SD card to view your media.

Maintenance

1. Cleaning

• Lens: Gently wipe the camera lens with a soft, lint-free cloth. Avoid abrasive materials that could scratch the lens.
• Housing: Clean the camera's exterior with a damp cloth. Do not use harsh chemicals or solvents.
• PIR Sensor: Ensure the PIR sensor window is clear of dirt, debris, or spiderwebs to maintain optimal detection performance.

2. Battery Management

• Replace all batteries simultaneously. Do not mix old and new batteries, or different battery types.
• If the camera will be stored for an extended period, remove the batteries to prevent leakage and potential damage.

3. SD Card Management

• Regularly format your SD card using the camera's internal formatting function (if available) or a computer. This helps prevent data corruption.
• Ensure the SD card is properly inserted and removed to avoid damage to the card or camera slot.

Troubleshooting

Specifications

Warranty and Support

For warranty information or technical support, please refer to the official Wildgame Innovations website or contact their customer service department. Keep your purchase receipt as proof of purchase for any warranty claims.