WishRing HB-6A Bluetooth Wireless Adaptor + PTT Headset User Manual

Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your WishRing HB-6A Bluetooth Wireless Adaptor and PTT Headset. This system is designed to provide wireless communication capabilities for compatible two-way radios, enhancing convenience and mobility.

Package Contents

Figure 1: All components included in the package.

• 1 x Walkie Talkie Bluetooth Headset
• 1 x M1 plug Bluetooth Dongle (Wireless Adaptor)
• 1 x Wireless Bluetooth PTT Remote
• 1 x Charging cable
• 1 x Finger magic strap
• 1 x User Manual (this document)
• 2 x Mushroom earbud for replacement

Product Features

• Wireless headset for two-way radio communication.
• Compatible with M1 Plug handheld Walkie Talkies and Bluetooth pairing devices (iPhone/Android).
• Bluetooth V4.0 Class 2 version for reliable connectivity.
• Operating range: Up to 10 meters (33 feet).
• Battery life: 5-8 hours talk time, up to 100 hours standby time.
• Charging time: Approximately 2 hours.
• Lightweight design for comfortable wear.

Setup Instructions

1. Charging the Devices

Before initial use, fully charge both the Bluetooth headset and the M1 plug Bluetooth dongle. Use the provided charging cable.

Figure 2: Both the dongle and headset can be charged simultaneously using the provided cable.

• Connect the charging cable to a USB power source.
• Connect the micro-USB ends to the charging ports on the headset and the dongle.
• An indicator light will show charging status (refer to device for specific light behavior).
• Charging typically takes about 2 hours.

2. Connecting the Wireless Adaptor to the Radio

1. Ensure your two-way radio is powered off.
2. Locate the earphone/accessory port on your radio.
3. Insert the M1 plug Bluetooth dongle firmly into the radio's earphone hole. Ensure it is fully seated to prevent connection issues, especially if your radio has a dust cover.

Figure 3: Step 1 - Wireless adapter plugs into the earphone hole of the intercom.

Figure 4: Ensure the adapter is fully plugged into the jack hole to prevent connection problems.

3. Pairing the Wireless Adaptor

1. With the dongle inserted, power on your two-way radio.
2. The dongle's indicator light will flash red and blue, indicating it is in pairing mode.
3. Press the power button on the dongle. The adapter will turn red.
4. Release the PTT button (if applicable, or the power button if it doubles as PTT for pairing). The blue light will flash, indicating successful pairing and entry into working state. A steady red light indicates the radio is in intercom mode.

Figure 5: Step 2 - Pairing the wireless adapter with the radio.

4. Pairing the Bluetooth Headset

1. Power on the Bluetooth headset. It will enter pairing mode, indicated by a blue flashing red light.
2. Ensure the wireless adaptor is already paired with the radio and in working state.
3. The headset will automatically connect to the adaptor. Once connected, the headset's indicator light will show blue flashes.

Figure 6: Step 3 - Pairing the Bluetooth headset.

Operating Instructions

Wearing the Headset

The headset is designed for comfortable wear and can be adjusted for either the left or right ear.

Figure 7: Headset designed for comfortable wear.

Figure 8: The headset boom can rotate for left or right ear use.

Figure 9: Examples of left and right ear wear.

Push-to-Talk (PTT) Function

To transmit your voice through the radio, use the Push-to-Talk (PTT) button.

Figure 10: Step 4 - Press PTT to call.

• Using the Wireless PTT Remote: Press and hold the button on the wireless PTT remote to transmit. Release to listen.
• Using the Headset PTT: The headset may also have an integrated PTT button. Press and hold it to transmit, release to listen.
• Important: There may be a slight delay between pressing the PTT and transmission. Wait a quarter to half a second after pressing before speaking to ensure your message is fully transmitted.

Volume Control

Adjust the listening volume directly on the Bluetooth headset using the volume control buttons.

• Locate the volume control buttons on the side of the headset.
• Press '+' to increase volume and '-' to decrease volume.
• Ensure the volume is set to an appropriate level for clear reception.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the headset and adaptor. Do not use harsh chemicals or abrasive cleaners.
• Storage: Store the devices in a cool, dry place away from direct sunlight and extreme temperatures.
• Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the devices regularly, even if not in use for extended periods.
• Earbuds: Replace mushroom earbuds as needed for hygiene and comfort.

Troubleshooting

Issue: Devices not pairing or connecting.

• Ensure both the adaptor and headset are fully charged.
• Verify the adaptor is fully inserted into the radio's port.
• Confirm both devices are powered on and in pairing mode (flashing indicator lights).
• Try restarting both the radio, adaptor, and headset, then attempt pairing again.
• Ensure no other Bluetooth devices are interfering with the pairing process.

Issue: No audio or poor audio quality.

• Check the volume level on the headset and ensure it is not muted.
• Confirm the adaptor is securely connected to the radio.
• Ensure the headset is properly seated on your ear.
• Verify the radio's volume is set appropriately.
• If using the PTT, remember to pause briefly after pressing before speaking.

Issue: Short battery life.

• Ensure devices are fully charged before use (approx. 2 hours).
• Operating range and continuous talk time can affect battery duration.
• Battery performance may degrade over time with repeated charge cycles.

Issue: PTT button unresponsive or intermittent.

• Ensure the wireless PTT remote is charged and paired.
• Check for physical damage to the PTT button on both the remote and headset.
• If the issue persists, it may indicate a hardware fault.

Specifications

Compatible Radio Models

The WishRing HB-6A Bluetooth Wireless Adaptor is compatible with a wide range of two-way radio models, primarily those using an M1 plug. Below is a detailed list:

Warranty and Support

This product is covered by a standard manufacturer's warranty. For specific warranty details, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support or inquiries, please reach out to the seller or manufacturer through your purchase platform.

Manufacturer: HKSUNKIN / Shenzhen Lilian Communication Technology Co., Ltd.