DVKNM Upgrade Dual Backup Camera Monitor Kit

Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your DVKNM Upgrade Dual Backup Camera Monitor Kit. Please read this guide thoroughly before use to ensure proper functionality and safety. This system is designed to enhance visibility and safety for various large vehicles.

What's in the Box

• 7 Inch AHD Monitor x1
• 1080P HD Camera x2
• 66ft Video Cable x2
• Car Charger x1
• Sunshade x1
• Remote Control x1
• Power Cord x1
• Bracket x1
• Double-Sided Adhesive x1
• User Manual x1

Product Features

The DVKNM Backup Camera Monitor Kit is equipped with advanced features for reliable performance:

• Ultra Clear 7" HD 1080P Monitor: Provides a sharp, color-accurate display with 1920x1080 pixel resolution for improved safety.
• IP69 Waterproof Cameras: Designed to withstand extreme weather conditions, ensuring durability and consistent performance.
• Detailed Night Vision: Features 18 LED Infrared lights for clear visibility up to 50 feet in low-light conditions.
• Easy to Use Settings: Includes an IR Remote Controller for adjusting brightness, contrast, color, and supporting rotate mirror function.
• Stable Wired Transmission: Advanced 4-pin connectors ensure maximum resolution and prevent image delays or signal problems.

Setup and Installation

The DVKNM Backup Camera Monitor Kit is designed for simple DIY installation. Follow these steps for a smooth setup:

1. Mounting the Monitor: The 7-inch monitor can be installed either standing or mounted using the included bracket. Choose a location that provides clear visibility without obstructing your view of the road.
2. Mounting the Cameras: Securely attach the IP69 waterproof cameras to the desired locations on your vehicle. Ensure they have a clear line of sight for optimal viewing.
3. Wiring: The system uses a simple plug-and-play design. Power the unit using the car charger or hardwire it for 9-36 volts. Connect the 66ft video cables from the cameras to the monitor. The advanced 4-pin connectors ensure stable high-speed transmission.

For a visual guide on installation and wiring, please refer to the video below:

Another user demonstrates the installation and operation in a semi-truck, showcasing the practical application for large vehicles:

Operating Instructions

Your DVKNM monitor is designed for intuitive operation. Use the buttons on the monitor or the included IR Remote Controller to navigate settings.

• Switching Channels: The monitor supports two camera inputs. Use the V1/V2 button to switch between Camera 1 and Camera 2 views.
• Adjusting Display: Use the MENU button to access settings for brightness, contrast, and color. Use the arrow buttons to adjust values.
• Rotate Mirror Function: The system supports a rotate mirror function, allowing you to adjust the image orientation as needed.
• Parking Lines: Customize or disable the reversing guide lines to assist with parking and backing up.

See the monitor in action, demonstrating its quick response and parking line features:

Maintenance

To ensure the longevity and optimal performance of your DVKNM Backup Camera Monitor Kit, follow these maintenance guidelines:

• Cleaning: Regularly clean the monitor screen and camera lenses with a soft, damp cloth. Avoid abrasive cleaners that could scratch surfaces.
• Weather Protection: The cameras are IP69 waterproof, designed to withstand harsh weather. However, ensure all connections are secure and free from debris to prevent moisture ingress.
• Cable Inspection: Periodically check the video cables for any signs of wear, damage, or loose connections. Secure or replace damaged cables promptly.

Troubleshooting

If you encounter issues with your DVKNM Backup Camera Monitor Kit, try the following troubleshooting steps:

• No Signal on Monitor:
  • Check all power connections to the monitor and cameras. Ensure they are securely plugged in and receiving power.
  • Verify that the video cables are properly connected to both the cameras and the monitor inputs.
  • Ensure the correct video input channel (V1/V2) is selected on the monitor.
• Poor Image Quality:
  • Clean the camera lenses to remove any dirt, dust, or moisture.
  • Adjust the brightness, contrast, and color settings on the monitor using the remote control or menu buttons.
  • Ensure the cameras are securely mounted and not vibrating, which can cause blurry images.

A user demonstrates a 'No Signal' issue and how it can be resolved by checking connections: