Why will my ABRAMTEK E600 speaker not charge?

If your ABRAMTEK E600 speaker is not charging, please follow these troubleshooting steps based on the user manual:Check the Connection: Ensure the provided USB-C data cable is securely plugged into the speaker's USB port and a compatible USB power adapter.Try a Different Power Source: Test a different USB wall adapter or a different USB port on a computer to rule out a faulty power source.Inspect the Cable: Try using a different USB-C cable to ensure the original cable is not damaged.Perform a Factory Reset: Locate the RST (Reset) pinhole on the side panel of the speaker. Use a small, thin object (like a paperclip) to press the reset button, which can resolve software-related charging issues.Verify Charging Time: A full charge typically takes approximately 4.5 hours. Ensure you are leaving it plugged in long enough to see a change in the battery status.If the speaker still does not charge or power on after these steps, the battery may have reached the end of its estimated 3-year lifespan, or there may be a hardware fault. You may need to contact ABRAMTEK support for warranty claims.

ABRAMTEK E600

ABRAMTEK E600 Bluetooth Speaker User Manual

Model: E600

Introduction

This manual provides essential information for the safe and effective operation of your ABRAMTEK E600 Bluetooth Speaker. Please read this manual thoroughly before using the product and retain it for future reference.

The ABRAMTEK E600 is a high-power wireless speaker designed for versatile use, featuring DPAC Super Bass Technology and True 360° Surround Sound. It supports Bluetooth connectivity and stereo pairing for an enhanced audio experience.

What's in the Box

Verify that all components are present upon unboxing:

ABRAMTEK E600 Bluetooth Speaker (x1)
USB-C Data Cable (x1)
3.5mm AUX Cable (x1)
User Manual (x1)

Product Overview

Familiarize yourself with the speaker's design and key components.

ABRAMTEK E600 Bluetooth Speaker, full view

Figure 1: Full view of the ABRAMTEK E600 Bluetooth Speaker, showcasing its cylindrical design and black mesh top section.

Top panel of ABRAMTEK E600 speaker with control buttons

Figure 2: Close-up of the speaker's top panel, showing the power button, volume controls (+/-), and mode button (M).

Side panel of ABRAMTEK E600 speaker with ports

Figure 3: View of the speaker's side panel, indicating the RST (reset), AUX, USB, and OUT ports.

Figure 4: The speaker positioned next to a television, illustrating its dimensions: 5.3 inches (13.4 cm) in diameter and 23.6 inches (60 cm) in height.

Setup

1. Charging the Speaker

Before first use, fully charge the speaker. Connect the provided USB-C cable to the speaker's USB port and the other end to a compatible USB power adapter (not included). The charging time is approximately 4.5 hours.

2. Power On/Off

To Power On: Press and hold the power button on the top panel until the indicator light illuminates.
To Power Off: Press and hold the power button again until the indicator light turns off.

3. Bluetooth Pairing

Ensure the speaker is powered on and in Bluetooth pairing mode (indicated by a flashing blue light).
On your device (smartphone, tablet, laptop), enable Bluetooth and search for available devices.
Select "ABRAMTEK E600" from the list of devices.
Once connected, the indicator light will turn solid blue.

4. Wired Connection (AUX)

To connect via AUX, plug one end of the 3.5mm AUX cable into the speaker's AUX port and the other end into the audio output jack of your device. The speaker will automatically switch to AUX mode.

5. Stereo Pairing (True Wireless Stereo - TWS)

To achieve true left and right channel stereo sound, you can connect two compatible E600 speakers wirelessly:

Ensure both E600 speakers are powered on and not connected to any Bluetooth device.
On one speaker (this will be the master), press and hold the 'M' (Mode) button until you hear a pairing tone.
The two speakers will automatically search for and connect to each other. Once connected, you will hear a confirmation tone.
Now, connect your device to the master speaker via Bluetooth as described in step 3. The audio will play in stereo across both speakers.

Note: For optimal stereo separation, place the speakers appropriately within your listening environment.

Operating Instructions

Controls

Button/Port	Function
Power Button	Press and hold to Power On/Off.
'+' Button	Short press: Next Track. Long press: Increase Volume.
'-' Button	Short press: Previous Track. Long press: Decrease Volume.
'M' (Mode) Button	Short press: Switch between Bluetooth/AUX modes. Long press: Initiate TWS pairing.
AUX Port	3.5mm audio input for wired connection.
USB Port	USB-C charging port.
RST (Reset)	Small pinhole for factory reset (use a thin object).

LED Light Control

The speaker features a soft ambient LED light at its base. To turn the light off or on, quickly press the power button twice.

Maintenance

Clean the speaker with a soft, dry cloth. Do not use abrasive cleaners or solvents.
Avoid exposing the speaker to extreme temperatures, humidity, or direct sunlight.
Do not immerse the speaker in water. It is not waterproof.
Store the speaker in a cool, dry place when not in use for extended periods.

Troubleshooting

Problem	Possible Cause / Solution
Speaker does not power on.	Battery may be depleted. Connect to power source and charge.
Cannot pair via Bluetooth.	Ensure speaker is in pairing mode (flashing blue light). Ensure Bluetooth is enabled on your device. Move speaker closer to your device. Clear previous Bluetooth connections on your device and try again. Perform a factory reset using the RST pinhole.
No sound or low volume.	Adjust volume on both the speaker and your connected device. Ensure correct input mode (Bluetooth/AUX) is selected. Check AUX cable connection if using wired mode.
Stereo pairing (TWS) fails.	Ensure both speakers are E600 models and not connected to any other Bluetooth device. Repeat the TWS pairing steps carefully. Ensure speakers are within close proximity during pairing.
Audio distortion at high volume.	Reduce the volume on both the speaker and the connected device.

Specifications

Feature	Detail
Model Name	E600
Speaker Type	Subwoofer
Speaker Maximum Output Power	100 Watts
Connectivity Technology	Auxiliary, Bluetooth, USB
Wireless Communication Technology	Bluetooth
Bluetooth Range	20 Meters
Audio Output Mode	Stereo, Surround
Frequency Response	30 Hz
Signal-to-Noise Ratio	95 dB
Battery Life	3 years (estimated lifespan)
Battery Capacity	4400 mAh
Charging Time	4.5 Hours
Product Dimensions (D x W x H)	5.3" x 5.3" x 23.6"
Item Weight	7.48 pounds (3.4 Kilograms)
Material	Composite
Is Waterproof	No
Included Components	E600 bluetooth speaker, USB-C data cable, 3.5MM aux cable, User manual

Warranty and Support

The ABRAMTEK E600 Bluetooth Speaker comes with a limited warranty. Please refer to the warranty card included in your packaging for specific terms and conditions.

For further assistance, troubleshooting, or warranty claims, please visit the official ABRAMTEK store or contact customer support through the details provided on the product packaging or the official brand website.

Official ABRAMTEK Store: ABRAMTEK Store on Amazon

Important Safety Information

Do not disassemble, repair, or modify the speaker. This may cause damage, electric shock, or fire, and will void the warranty.
Keep the speaker away from water, moisture, and other liquids.
Do not expose the speaker to open flames or extreme heat.
Use only the provided or recommended charging cables and adapters.
Keep out of reach of children.
Avoid prolonged listening at high volumes to prevent hearing damage.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.