Planet Bike Blaze® 800 SLX Bike Headlight User Manual
Model: 3155
Introduction
The Planet Bike Blaze® 800 SLX is a high-powered bike headlight designed to provide illumination for various cycling conditions. It features a balance of lumen output and run times, with Clean Beam lensing for anti-glare illumination. Lateral light portals enhance side visibility. This manual provides instructions for the proper setup, operation, and maintenance of your Blaze 800 SLX headlight.
What's in the Box
Verify that all components are present before proceeding with installation.
Blaze 800 SLX Bike Headlight
Handlebar Mount
Micro USB Charging Cable
GoPro and Garmin adapter mounts (requires a separate GoPro or Garmin base mount)
Image: The Planet Bike Blaze 800 SLX headlight, handlebar mount, and USB charging cable.
Setup
1. Charging the Headlight
Before first use, fully charge the Blaze 800 SLX headlight. The Sanyo 3350 mAh lithium-ion battery charges in approximately 6.3 hours.
Locate the micro USB port on the headlight, typically covered by a rubber flap for water resistance.
Connect the provided micro USB cable to the headlight and the other end to a USB power source (e.g., computer, wall adapter).
The indicator light will show charging status. Once fully charged, disconnect the cable and ensure the rubber flap is securely closed.
Image: Micro USB charging port on the Blaze 800 SLX headlight.
2. Mounting the Headlight
The Blaze 800 SLX includes a handlebar mount and adapters for GoPro® and Garmin® base mounts (base mounts not included).
Handlebar Mount: Attach the handlebar mount securely to your bicycle's handlebar. Ensure it is tightened sufficiently to prevent movement during rides.
Slide the headlight onto the mount until it clicks into place.
Adjust the angle of the headlight to illuminate the path ahead without blinding oncoming traffic or pedestrians. The Clean Beam lensing helps direct light downwards.
GoPro/Garmin Mounts: If using GoPro or Garmin adapters, attach the appropriate adapter to your existing base mount, then secure the headlight to the adapter.
Image: Blaze 800 SLX headlight mounted on a bicycle handlebar.Image: Rear view of the Blaze 800 SLX headlight on its mount.
Operating Instructions
The Blaze 800 SLX features multiple lighting modes for various riding conditions. The power button is located on the top of the unit.
Power On/Off
To turn on the light, press and hold the power button for approximately 1 second.
To turn off the light, press and hold the power button for approximately 1 second.
Changing Modes
Once the light is on, short press the power button to cycle through the available modes:
High (800 Lumens): For maximum illumination, ideal for dark trails. Run time: 1.5 hours.
Medium (400 Lumens): Balanced brightness for general night riding. Run time: 3.7 hours.
Low (200 Lumens): For extended rides or areas with some ambient light. Run time: 6 hours.
Courtesy (160-270 Lumens): A pulsing mode designed to attract attention without being overly aggressive. Run time: 16 hours.
Superflash (800 Lumens): A high-visibility flashing mode for daytime or high-traffic conditions. Run time: up to 32 hours.
Image: Illumination comparison of Blaze 800 SLX at different lumen outputs.
The lateral light portals provide 275° of visibility, increasing your presence to others from the side.
Image: Key features and specifications of the Blaze 800 SLX headlight.
Video: A cyclist riding with the Planet Bike Blaze 600 headlight (similar model) in foggy morning conditions, demonstrating visibility.
Maintenance
Cleaning: Wipe the headlight body and lens with a soft, damp cloth. Avoid abrasive cleaners or solvents.
Water Resistance: The Blaze 800 SLX is rated to IP66 standard, meaning it is protected against powerful water jets. Ensure the USB port cover is securely closed to maintain water resistance. Do not submerge the light.
Battery Care: For optimal battery life, avoid fully discharging the battery regularly. Recharge the light after each significant use. If storing for an extended period, charge the battery to approximately 50% and recharge every few months.
Storage: Store the headlight in a cool, dry place away from direct sunlight when not in use.
Troubleshooting
Light does not turn on:
Ensure the battery is charged. Connect to a USB power source and check the charging indicator.
Press and hold the power button for at least 1 second to ensure it's properly activated.
Light flickers or dims unexpectedly:
The battery may be low. Recharge the unit.
Ensure the connections to the mount are secure.
Mount is loose:
Tighten the handlebar mount screw or strap.
Ensure the headlight is fully clicked into the mount.
Water ingress:
Ensure the USB port cover is always securely closed when not charging, especially in wet conditions.
If water has entered the unit, discontinue use and allow it to dry completely before attempting to use or charge again.
Specifications
Model Number
3155
Light Output Maximum
800 Lumens
Battery
Sanyo 3350 mAh Lithium-Ion (Rechargeable)
Charge Time
6.3 hours
Run Times (FL1 Tested)
High (800 lm): 1.5 hrs
Medium (400 lm): 3.7 hrs
Low (200 lm): 6 hrs
Courtesy (160-270 lm): 16 hrs
Superflash (800 lm): Up to 32 hrs
Water Resistance Rating
IP66
Visibility
275° lateral light portals
Mounting Type
Handlebar Mount (GoPro® and Garmin® adapter mounts included, base mounts required)
Material
Plastic
Item Weight
0.23 Kilograms
Dimensions (L x W x H)
5"L x 2"W x 6.5"H
Warranty and Support
Warranty: Planet Bike lights with rechargeable batteries have a warranty of 2 years from the date of purchase. Please retain your proof of purchase for warranty claims.
Customer Support: For technical assistance, warranty inquiries, or replacement parts, please contact Planet Bike customer service. Refer to the official Planet Bike website for current contact information.
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.
