Porseme 280ml Essential Oil Diffuser

Introduction

The Porseme 280ml Essential Oil Diffuser is an ultrasonic aromatherapy humidifier designed to enhance your environment with soothing aromas and gentle mist. Featuring a handmade 3D glass cover and a range of functional settings, this diffuser is suitable for various spaces including homes, offices, yoga studios, and spas. It operates quietly and includes safety features like automatic shut-off.

Image: The Porseme 280ml Essential Oil Diffuser in operation, showcasing its elegant 3D glass design and mist output.

Product Components

• Handmade 3D Glass Cover
• Plastic Base with Water Tank
• Power Adapter
• Measuring Cup (typically included for filling)

Image: A close-up view of the diffuser's handmade glass cover, highlighting its unique texture and craftsmanship.

Setup Instructions

1. Place the Diffuser: Position the diffuser on a flat, stable surface away from direct sunlight or heat sources.
2. Remove Covers: Gently remove the handmade 3D glass cover, then lift off the inner plastic lid.
3. Fill Water Tank: Using a measuring cup, fill the water tank with clean tap water. Do not exceed the "MAX" line indicated inside the tank.
4. Add Essential Oils: Add 3-5 drops of your preferred essential oil directly into the water tank. Adjust the quantity based on personal preference and room size.
5. Replace Covers: Securely place the inner plastic lid back onto the base, ensuring it is properly aligned. Then, carefully place the handmade 3D glass cover back on top.
6. Connect Power: Plug the power adapter into the diffuser's power input port, then plug the adapter into a standard electrical outlet.

Operating Instructions

The diffuser features intuitive buttons on its base for mist and light control.

• Mist Button (Left Button):
  • Press once to turn on continuous mist.
  • Press again to cycle through timer settings: 1 hour, 3 hours, 5 hours.
  • Press a fifth time to turn off the mist.
• Light Button (Right Button):
  • Press once to turn on the 7-color changing LED light mode.
  • Press again to pause on your desired color.
  • Continue pressing to cycle through individual colors.
  • Press and hold for 2 seconds to turn off the light.

Maintenance and Cleaning

Regular cleaning ensures optimal performance and longevity of your diffuser.

1. Empty Water Tank: Always empty the water tank when the diffuser is not in use.
2. Clean Atomizer: Regularly clean the ultrasonic atomizer plate located at the bottom of the water tank. Use a cotton swab dipped in white vinegar to gently wipe away any mineral buildup.
3. Wipe Surfaces: Wipe the exterior of the diffuser, including the glass cover and plastic base, with a soft, damp cloth.
4. Avoid Corrosive Cleaners: Do not use harsh detergents, abrasive cleaners, or solvents, as these can damage the diffuser.
5. Dry Thoroughly: Ensure all parts are completely dry before reassembling or storing the diffuser.

Safety Precautions

• Do not exceed the "MAX" water fill line to prevent overflow and potential damage.
• Ensure the lid is properly in place before operating the diffuser to prevent water leakage.
• Never invert the base when the water tank contains water.
• Use only the provided power adapter and ensure the correct voltage input.
• The diffuser features an automatic shut-off function when the water tank is empty, ensuring safe operation.
• Keep out of reach of children and pets.

Specifications

Image: Visual representation of the diffuser's key features including its 10-inch height, 5.5-inch diameter, 280ml capacity, 7-hour run time, timer functions, and 7-color LED lights.

Troubleshooting

• No Mist/Low Mist: Ensure the water level is between the MIN and MAX lines. Check if the atomizer plate is clean and free of mineral buildup.
• Water Leakage: Verify that the inner plastic lid and the glass cover are securely and correctly placed. Do not overfill the water tank.
• Unusual Noise: Ensure the diffuser is placed on a flat, stable surface. Check for any obstructions in the mist outlet.
• Diffuser Not Turning On: Confirm the power adapter is securely plugged into both the diffuser and the electrical outlet.
• Excessive Wetness Around Diffuser: Ensure the diffuser is not placed directly under or near sensitive surfaces. The mist output is strong; consider placing it in an area where slight moisture accumulation is not an issue.

Warranty and Support

For any product inquiries, technical support, or warranty claims, please contact Porseme customer service. Refer to your purchase documentation for specific warranty details and contact information.

You can also visit the official Porseme store on Amazon for more information and support: Porseme Store