Introduction
Thank you for choosing the HXSJ M10 Wireless / Rechargeable Gaming Mouse. This manual provides detailed instructions on how to set up, operate, and maintain your new gaming mouse to ensure optimal performance and longevity. Please read this manual thoroughly before using the product.
Package Contents
Please check the package contents to ensure all items are present:
- 1 x HXSJ M10 Wireless Gaming Mouse
- 1 x USB Receiver (2.4GHz)
- 1 x USB Charging Cable
- 1 x User Manual (this document)
Setup
1. Charging the Mouse
Before first use, it is recommended to fully charge the mouse. Connect the supplied USB charging cable to the charging port on the front of the mouse and the other end to a USB power source (e.g., computer USB port, USB wall adapter). The backlight may indicate charging status (e.g., breathing light, specific color). A full charge typically takes 2-3 hours.
Image: HXSJ M10 mouse connected to a USB charging cable for charging.
2. Connecting the USB Receiver
Locate the USB receiver, usually stored in a compartment on the underside of the mouse. Remove it and plug it into an available USB port on your computer. The system will automatically detect and install the necessary drivers. No manual driver installation is typically required for standard functionality.
3. Powering On the Mouse
Flip the power switch, located on the underside of the mouse, to the "ON" position. The mouse should connect automatically to the USB receiver. The backlight will illuminate, indicating it is powered on and ready for use.
Operating Instructions
1. DPI Adjustment
The HXSJ M10 mouse features adjustable DPI (Dots Per Inch) settings, allowing you to change cursor sensitivity. Press the DPI button (usually located behind the scroll wheel) to cycle through available DPI levels (e.g., 800, 1200, 1600, 2400 DPI). Each press will change the sensitivity, often indicated by a temporary change in backlight color or a flash.
2. Backlight Control
The mouse features a 7-color breathing backlight. The backlight automatically cycles through colors. There is typically no manual control to select a specific color, but some models may allow turning the backlight on/off by holding a specific button combination (e.g., DPI button + side button).
3. Button Functions
- Left Click: Standard primary click function.
- Right Click: Standard secondary click function (context menu).
- Scroll Wheel: Scrolls content up/down. Can also be clicked for middle-click functionality.
- DPI Button: Cycles through DPI settings.
- Side Buttons (Forward/Backward): Typically used for navigation in web browsers or file explorers.
4. Power Saving Mode
To conserve battery life, the mouse will automatically enter a sleep mode after a period of inactivity. To wake it up, simply move the mouse or click any button. The backlight may turn off in sleep mode and reactivate upon waking.
Image: Diagram illustrating the various buttons and their functions on the HXSJ M10 gaming mouse.
Maintenance
1. Cleaning
To clean the mouse, use a soft, dry, lint-free cloth. For stubborn dirt, slightly dampen the cloth with water or a mild electronics cleaner. Avoid using harsh chemicals, abrasive materials, or excessive moisture, as these can damage the mouse. Regularly clean the optical sensor on the underside to ensure accurate tracking.
2. Battery Care
The HXSJ M10 mouse uses a built-in rechargeable battery. To prolong battery life:
- Avoid fully discharging the battery frequently.
- Charge the mouse when the battery indicator (if any) suggests low power.
- Do not expose the mouse to extreme temperatures.
- If storing for a long period, charge the mouse to about 50% before storage.
3. Storage
When not in use for extended periods, turn off the mouse using the power switch on the underside. Store the mouse and USB receiver in a cool, dry place, away from direct sunlight and extreme temperatures.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Mouse not responding | Low battery; USB receiver disconnected; Mouse not powered on; Driver issue. | Charge the mouse; Re-insert USB receiver; Turn on mouse; Try a different USB port; Restart computer. |
| Lag or intermittent connection | Interference; Distance from receiver; Low battery. | Move receiver closer; Ensure no large metal objects between mouse and receiver; Charge mouse; Avoid other 2.4GHz devices nearby. |
| Backlight not working | Mouse off; Battery low; Faulty LED. | Turn on mouse; Charge mouse; Contact support if persistent. |
| Cursor movement erratic | Dirty optical sensor; Uneven surface. | Clean optical sensor; Use on a clean, flat mouse pad or surface. |
Specifications
- Model: HXSJ M10
- Connectivity: 2.4GHz Wireless USB Receiver
- DPI Levels: 800 / 1200 / 1600 / 2400 DPI (Adjustable)
- Buttons: 6 (Left, Right, Scroll Wheel, DPI, Forward, Backward)
- Backlight: 7-Color Breathing LED
- Battery Type: Built-in Rechargeable Lithium Battery
- Charging Port: Micro USB
- Operating Distance: Up to 10 meters (approx. 33 feet)
- Compatibility: Windows XP/Vista/7/8/10, Mac OS (basic functions)
Warranty and Support
Information regarding product warranty and customer support details is not available in the provided data. Please refer to the product packaging or the seller's website for specific warranty terms and contact information for technical support.
For further assistance, you may also visit the official HXSJ website or contact their customer service department directly.
