Important Safeguards
Please read all instructions carefully before using this appliance to ensure safe operation and to prevent damage.
- Automatic Shut-Off: The kettle is equipped with an automatic shut-off function that activates when water reaches boiling point, preventing over-boiling.
- Boil-Dry Protection: This safety feature automatically turns off the kettle if it is accidentally switched on without water or if the water level is too low, protecting the heating element from damage.
- BPA-Free Materials: All water-contact materials are 100% BPA-free, ensuring your hot beverages remain free from harmful chemicals.
- Strix Thermostat: Features a high-quality Strix thermostat control system for reliable and precise temperature management.
- Heat-Resistant Handle: The handle is designed to remain cool to the touch during operation, allowing for safe pouring.
- Do not immerse the kettle, power base, cord, or plug in water or other liquids.
- Always ensure the lid is securely closed before operating the kettle.
- Keep the appliance out of reach of children.
Product Overview
The Amazon Basics Electric Stainless Steel Kettle is designed for rapid water boiling, featuring a durable stainless steel construction and user-friendly design. It is ideal for preparing hot beverages such as tea and coffee.
Setup
- Unpack: Carefully remove the kettle and all accessories from the packaging. Retain packaging for future storage or transport.
- Initial Cleaning: Before first use, fill the kettle with clean water to the MAX level. Boil the water, then discard it. Repeat this process 2-3 times to remove any manufacturing residues.
- Positioning: Place the power base on a stable, flat, heat-resistant surface. Ensure the power cord is not dangling where it can be pulled or tripped over.
Operating Instructions
- Fill the Kettle: Open the lid and fill the kettle with the desired amount of fresh, cold water. Do not fill below the MIN mark or above the MAX mark indicated on the water level window.
- Secure Lid: Close the lid firmly to ensure it is properly sealed.
- Place on Base: Position the kettle securely onto its power base.
- Connect Power: Plug the power cord into a standard electrical outlet.
- Switch On: Press the ON/OFF switch located on the handle or base. An indicator light will illuminate, signaling that the kettle is heating.
- Boiling Process: The kettle will rapidly heat the water. Once the water reaches boiling point, the automatic shut-off feature will activate, and the indicator light will turn off.
- Pouring: Carefully lift the kettle from its base and pour the hot water. The heat-resistant handle ensures safe handling.
Cleaning and Maintenance
Regular cleaning and maintenance will prolong the life of your kettle and ensure optimal performance.
- Always unplug the kettle from the power outlet and allow it to cool completely before cleaning.
- Exterior Cleaning: Wipe the exterior of the kettle with a soft, damp cloth. Do not use abrasive cleaners or scouring pads, as these can scratch the stainless steel finish.
- Interior Cleaning (Hand Wash): The interior of the kettle should be hand washed. The wide opening facilitates easy access for cleaning with a sponge.
- Removable Filter: The kettle includes a removable filter. Periodically remove and rinse it under running water to clear any mineral deposits or debris.
- Descaling: Mineral deposits (limescale) can build up inside the kettle, especially in hard water areas. To descale, fill the kettle with a mixture of equal parts water and white vinegar (or a commercial descaling solution). Let it soak for at least 30 minutes, or boil the mixture if deposits are heavy. Rinse thoroughly several times with fresh water after descaling.
- Storage: When not in use, ensure the kettle is clean and dry. The cord wrap system under the base allows for easy and tidy storage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Kettle does not turn on. | No power supply; Kettle not properly seated on base; Boil-dry protection activated. | Check power outlet and plug connection. Ensure kettle is correctly placed on the power base. If boil-dry protection activated, allow kettle to cool down before refilling with water and restarting. |
| Water not boiling or boiling slowly. | Limescale buildup; Insufficient power. | Descale the kettle as per cleaning instructions. Ensure the kettle is plugged into a functioning power outlet. |
| Kettle switches off before boiling. | Limescale buildup affecting thermostat; Kettle not filled to MIN level. | Descale the kettle. Ensure water level is above the MIN mark. |
| Water tastes metallic or unusual. | New kettle residue; Limescale buildup. | Perform initial cleaning steps again. Descale the kettle. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Amazon Basics |
| Model Name | F-738BC |
| Capacity | 1.8 Quarts (1.7 Liters) |
| Power | 1500W |
| Material | Stainless Steel |
| Color | Black and Silver |
| Product Dimensions (L x W x H) | 9.2" x 6.1" x 9" (23.4 cm x 15.5 cm x 22.9 cm) |
| Item Weight | 2.01 pounds (910 Grams) |
| Special Features | Automatic Shut-Off, BPA-Free, Boil Dry Protection, Fast Boil, Strix Thermostat |
| Included Components | Removable filter |
| UPC | 192233052403 |
Warranty and Support
For detailed warranty information, please refer to the official Warranty Document provided with your product or available online:
For further assistance, troubleshooting, or product support, please visit the Amazon Basics support page or contact customer service.
