Sunco Dusk to Dawn LED Outdoor Light Bulb A19 Instruction Manual

1. Introduction

Thank you for choosing the Sunco Dusk to Dawn LED Outdoor Light Bulb A19. This innovative bulb is designed to provide convenient and energy-efficient outdoor lighting by automatically turning on at dusk and off at dawn. Featuring a built-in photocell sensor, it eliminates the need for external timers, offering a hassle-free lighting solution for your home.

Image 1.1: Sunco A19 Dusk to Dawn LED Light Bulbs (4-pack).

2. Safety Information

Please read all instructions carefully before installation and use. Keep this manual for future reference.

• Electrical Safety: Always ensure the power is turned off at the circuit breaker before installing or removing the bulb.
• Non-Dimmable: This bulb is non-dimmable. Do not use with dimmer switches, as this may damage the bulb or cause malfunction.
• Outdoor Use: Designed for outdoor applications, this bulb is damp rated and dust-tight (IP65 rated). Ensure it is installed in a suitable outdoor fixture.
• Sensor Exposure: For proper operation, the built-in photocell sensor must not be obstructed by the fixture or any other object.
• Operating Voltage: Use only with 120 Volts, 60 Hertz electrical systems.
• Handling: Allow the bulb to cool completely before handling.

3. Product Features

• Dusk to Dawn Photocell Sensor: This A19 LED bulb includes a photocell sensor that detects ambient light levels. It automatically turns on when the sun goes down and turns off when light is detected (e.g., at sunrise). Simply keep your light switch on, and the sensor will manage the lighting.


Image 3.1: Automatic Dusk to Dawn Operation.

• Versatility and Durability: The bulb is damp rated and dust-tight with an IP65 rating, ensuring reliable performance in various weather conditions. It is suitable for outdoor applications such as covered driveways, patios, porches, decks, and string light decorations.


Image 3.2: Weatherproof Design (IP65 Rated).

• Enhanced Security: With a 240° beam angle and 800 lumens of brightness, these bulbs provide widespread illumination, contributing to increased security around your property by deterring intruders.


Image 3.3: Wide Beam Angle for Enhanced Security.

• UL-Certified Quality: Sunco upholds high standards for all products. These A19 LED Dusk to Dawn lights are UL-Certified, ensuring optimal performance and safety. They contain no mercury and do not emit UV or IR radiation.
• Energy-Saving Efficiency: Operating at only 9 watts while providing 800 lumens (equivalent to a 60W incandescent bulb), these LEDs offer significant energy savings.


Image 3.4: Durable Design and Energy Efficiency.

• Integrated Design: The bulb features an E26 base for standard sockets and an integrated photocell sensor, making it an all-in-one unit with no additional accessories needed.


Image 3.5: LED Luminance and Internal Components.

4. Package Contents

• Sunco Dusk to Dawn LED Outdoor Light Bulb A19 (4 Count)

5. Setup and Installation

Installation of your Sunco Dusk to Dawn LED bulb is straightforward. Follow these steps:

1. Turn Off Power: Before beginning installation, ensure the power to the light fixture is turned off at the circuit breaker to prevent electrical shock.
2. Remove Old Bulb: Carefully unscrew and remove the existing light bulb from the fixture.
3. Install New Bulb: Screw the Sunco Dusk to Dawn LED bulb into the standard E26 socket until it is snug. Do not overtighten.
4. Ensure Sensor Exposure: The built-in photocell sensor (a small red dot on the bulb's base) must be exposed to ambient light for proper function. Ensure your fixture does not obstruct the sensor.


Image 5.1: Proper Sensor Exposure in Fixture.

5. Restore Power: Turn the power back on at the circuit breaker.
6. Activate Sensor: Leave the light switch in the "ON" position. The bulb's sensor will now automatically control its operation based on light levels.

For a visual guide, you can refer to the official installation manual: Installation Manual (PDF)

6. Operating Instructions

The Sunco Dusk to Dawn LED bulb is designed for simple, automatic operation:

• Automatic On/Off: Once installed and the light switch is left in the ON position, the bulb will automatically turn on when ambient light levels drop (dusk) and turn off when ambient light levels increase (dawn).
• "Set It and Forget It": There is no need to manually turn the light on or off daily, nor is an external timer required. The built-in photocell sensor handles all operations.
• Non-Dimmable: As noted, this bulb is not compatible with dimmer switches. It will operate at full brightness when on.

7. Maintenance

The Sunco Dusk to Dawn LED bulb requires minimal maintenance.

• Cleaning: To clean the bulb, ensure the power is off and the bulb is cool. Wipe gently with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
• No User-Serviceable Parts: Do not attempt to disassemble or repair the bulb. Doing so will void the warranty and may cause damage or injury.
• Sensor Cleanliness: Periodically check that the photocell sensor is free from dirt, dust, or obstructions to ensure accurate light detection.

8. Troubleshooting

If you experience issues with your Sunco Dusk to Dawn LED bulb, try the following solutions:

9. Specifications

10. Warranty and Support

Sunco Lighting stands behind its products with a commitment to quality and customer satisfaction.

• 5-Year Protection: This product is backed by Sunco's 5-year protection plan.
• Customer Support: For any questions, concerns, or support needs, please contact Sunco Lighting's knowledgeable support specialists.
• Online Resources: Additional information and resources can be found on the official Sunco Lighting store: Sunco Lighting Store
• User Guide (PDF): A comprehensive user guide is available for download: User Guide (PDF)