SEVERIN Deluxe Mini Kettle and Tea Maker WK 3473 Digital - User Manual

Introduction

This user manual provides important information for the safe and efficient operation of your SEVERIN Deluxe Mini Kettle and Tea Maker, model WK 3473 Digital. Please read these instructions carefully before first use and keep them for future reference.

Figure 1: SEVERIN Deluxe Mini Kettle and Tea Maker WK 3473 Digital in operation, showing water boiling.

Safety Instructions

• Always ensure the appliance is placed on a stable, level, heat-resistant surface.
• Do not immerse the kettle or its base in water or any other liquid.
• Keep out of reach of children.
• Do not operate the appliance if it is damaged or malfunctioning.
• Only use the appliance for its intended purpose: boiling water and brewing tea.
• Unplug the appliance from the power outlet when not in use and before cleaning.
• Avoid contact with hot surfaces. Use the handle.

Product Features

• Glass and stainless steel construction for durability and heat resistance.
• Capacity: 1.0 L for water, 0.75 L for tea.
• 2200 W power for rapid heating.
• Adjustable temperature settings from 40 °C to 100 °C in 5 °C increments.
• "Easy Tea Select" function with 5 pre-set brewing programs for various tea types.
• Adjustable brewing time from 1 to 15 minutes with an audible signal.
• Integrated ultra-sensitive sensor for precise temperature control.
• Fine stainless steel tea filter for direct infusion.
• Integrated tea filter handle for safe handling.

Figure 2: Key features of the SEVERIN Deluxe Mini Kettle and Tea Maker.

Setup

Unboxing and Initial Cleaning

1. Carefully remove all packaging materials.
2. Before first use, fill the kettle with cold water up to the MAX mark.
3. Boil the water at 100°C.
4. Discard the boiled water. Repeat this process 2-3 times to remove any manufacturing residues.
5. Wipe the exterior of the kettle and the base with a damp cloth.

Operating Instructions

Boiling Water

1. Place the kettle on its power base.
2. Fill the kettle with the desired amount of cold water, ensuring it is between the MIN and MAX marks.
3. Press the ON/OFF button to start boiling at 100°C directly.
4. Alternatively, use the PROGRAM button to select a specific temperature (40°C to 100°C) using the + and - buttons.
5. The kettle will automatically switch off once the selected temperature is reached.

Figure 3: Control panel for temperature and program selection.

Brewing Tea with "Easy Tea Select"

1. Fill the kettle with cold water up to the 0.75 L tea mark.
2. Open the lid and insert the fine stainless steel tea filter into the kettle.
3. Add your desired tea leaves into the filter.
4. Close the lid securely.
5. Press the PROGRAM button repeatedly to cycle through the 5 pre-set tea programs (e.g., White, Green, Oolong, Black, Herbal). Each program has a recommended temperature and brewing time.
6. You can adjust the brewing time (1-15 minutes) using the + and - buttons after selecting a program.
7. Press the ON/OFF button to start the brewing process.
8. An audible signal will sound when the brewing time is complete.
9. Carefully remove the tea filter using its integrated handle to prevent over-steeping.

Figure 4: The kettle's display showing tea programs and adjustable settings.

Figure 5: The integrated fine stainless steel tea filter.

Figure 6: Safe handling of the tea filter using its integrated handle.

Maintenance and Cleaning

Regular cleaning and maintenance will prolong the life of your appliance.

Daily Cleaning

• Always unplug the kettle and allow it to cool completely before cleaning.
• Wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners or scouring pads.
• Rinse the inside of the kettle and the tea filter with clean water.
• For stubborn stains inside the kettle, use a soft sponge and mild dish soap. Rinse thoroughly.

Figure 7: Cleaning the interior of the kettle.

Descaling

Limescale buildup can affect performance and energy efficiency. Descale regularly, especially in areas with hard water.

• Fill the kettle with a mixture of water and white vinegar (1:1 ratio) or a commercial descaling solution.
• Boil the mixture (if using vinegar, ensure good ventilation).
• Let it stand for 30-60 minutes, or as per descaler instructions.
• Empty the kettle and rinse thoroughly several times with fresh water to remove any residue and odor.

Troubleshooting

Specifications

• Brand: SEVERIN
• Model Number: 3473-000 (WK 3473 Digital)
• Color: Glass/Brushed Stainless Steel/Black
• Product Dimensions: 20.8 x 20.2 x 17.2 cm
• Volume: 1 Litre (Water), 0.75 Litre (Tea)
• Power: 2200 W
• Automatic Shut-off: Yes
• Special Features: Heat-resistant handle, Temperature control, Tea brewing programs
• Product Weight: 1.23 kg
• Material: Transparent and heat-resistant glass, durable and corrosion-resistant stainless steel
• Cord Length: 73 cm

Warranty and Support

SEVERIN products are manufactured to high quality standards and come with a manufacturer's warranty. Please refer to the warranty card included with your product for specific terms and conditions.

For technical support, spare parts, or warranty claims, please contact SEVERIN customer service. Contact details can typically be found on the official SEVERIN website or on the product packaging.

You can visit the official SEVERIN store for more information: SEVERIN Store