Introduction
Thank you for choosing the Teamson Home Indoor Tabletop Zen Waterfall Fountain. This manual provides essential information for the safe and efficient operation, setup, and maintenance of your new fountain. Please read these instructions carefully before use and retain them for future reference.
This mini waterfall relaxation fountain is crafted from durable polyresin, designed to create a serene and comfortable atmosphere in your indoor space, such as a bedroom, living room, or office.
Safety Information
- Always unplug the fountain from the electrical outlet before performing any maintenance, cleaning, or when adding/removing water.
- Ensure the power cord is not damaged or pinched. Do not operate the fountain with a damaged cord or plug.
- Place the fountain on a level, stable surface to prevent tipping and water spills.
- Keep the fountain out of reach of children and pets to prevent accidents.
- Use only clean, distilled, or filtered water to minimize mineral buildup and maintain pump longevity.
- Do not allow the pump to run dry, as this can cause damage. Always ensure the pump is fully submerged in water.
- This product is designed for indoor use. While durable, prolonged outdoor exposure may affect its finish and components.
Package Contents
Carefully unpack all components and ensure you have received the following items:
- Fountain Body (Stone Gray, 8" Cascading Cups design)
- Water Pump with LED Lights
- Power Adapter
- Decorative River Rocks (if included)
- Installation Guide (this manual)
Figure 1: Included components - fountain body and water pump.
Setup Instructions
Follow these steps to set up your tabletop fountain:
- Placement: Choose a flat, stable surface for your fountain, away from electrical outlets that could be splashed.
- Connect Pump: Locate the small hose inside the fountain body. Connect the pump's nozzle to this hose, ensuring a snug fit.
- Position Pump: Place the pump at the bottom of the fountain's reservoir, ensuring it sits flat and is fully submerged once water is added.
- Fill with Water: Fill the fountain's reservoir with clean, distilled, or filtered water. Ensure the water level is high enough to completely cover the pump, but not so high that it overflows when the fountain is running.
- Add Decorative Rocks: Carefully arrange the decorative river rocks (if included) around the base of the fountain, ensuring they do not obstruct the water flow or pump.
- Connect Power: Plug the power adapter into the pump's cord, then plug the adapter into a standard electrical outlet.
Figure 2: Fountain ready for operation on a tabletop.
Video 1: Official product video demonstrating the Teamson Home Indoor Cascading Cups Tabletop Water Fountain in operation. This video shows the water flowing through the cascading cups and the integrated LED light.
Operating Instructions
Operating your fountain is simple:
- Power On/Off: The fountain operates by plugging it into an electrical outlet. To turn it off, simply unplug the power adapter from the wall outlet.
- Water Level: Regularly check the water level. Due to evaporation, water levels will decrease over time. Refill with distilled or filtered water as needed to ensure the pump remains fully submerged.
- LED Lights: The integrated LED lights will illuminate automatically when the fountain is plugged in, enhancing the visual appeal and creating a calming ambiance.
Figure 3: The fountain with its LED lights illuminated, showcasing the cascading water.
Maintenance
Regular maintenance will ensure the longevity and optimal performance of your fountain:
- Water Replacement: Change the water every few days or weekly, depending on usage, to keep it fresh and prevent algae growth.
- Fountain Cleaning: Periodically clean the fountain body with a soft cloth and mild soap. Rinse thoroughly to remove any soap residue. Avoid abrasive cleaners that could damage the finish.
- Pump Cleaning: Disconnect the pump from the power source. Remove the pump from the fountain. Disassemble the pump (if possible, refer to pump manufacturer's instructions if available) and clean any debris, hair, or mineral buildup from the impeller and housing. Use a small brush or cotton swab for hard-to-reach areas. Rinse the pump thoroughly before reassembling and placing it back in the fountain.
- Mineral Buildup: If mineral deposits (white crust) appear, use a solution of vinegar and water to gently scrub them away. Rinse thoroughly.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No water flow or weak flow |
|
|
| Fountain is noisy |
|
|
| LED lights not working |
|
|
Specifications
- Model: 8" Cascading Cups
- Material: Polyresin
- Color: Stone Gray
- Product Dimensions (L x W x H): 7.01" x 7.01" x 7.87" (17.8 cm x 17.8 cm x 20 cm)
- Item Weight: 2.6 Pounds
- Power Source: Corded Electric
- Special Feature: Easy Assembly, Built-in LED Lights
Figure 4: Product dimensions for the 8" Cascading Cups fountain.
Warranty and Support
This Teamson Home product comes with a 30-day warranty against manufacturer defects. Please retain your proof of purchase for warranty claims.
For further assistance, troubleshooting not covered in this manual, or to inquire about replacement parts, please contact Teamson Home customer support through their official website or the retailer where the product was purchased.