1. Introduction
Thank you for choosing the Everbeam H6 Pro LED Headlamp. This manual provides essential information for the safe and effective use, maintenance, and troubleshooting of your device. Please read it thoroughly before operation and retain it for future reference.
Image 1.1: Everbeam H6 Pro Headlamp with included accessories (USB cable and storage case).
2. Product Overview
2.1 Key Features
- 650 Lumen Brightness: Provides powerful illumination up to 126 meters (413 feet).
- Multiple Light Modes: Includes two white light brightness levels, SOS mode, and a red light mode.
- Motion Sensor Control: Allows hands-free operation by waving your hand in front of the sensor.
- Rechargeable Battery: Built-in 1200mAh lithium-ion battery offers extended runtime.
- Durable Design: IPX4 water resistance for protection against splashes and light rain.
- Lightweight and Compact: Weighs approximately 72g (2.5oz) for comfortable wear.
2.2 Components
- Everbeam H6 Pro Headlamp
- Adjustable Elastic Headband
- USB Charging Cable
- Storage Case
Image 2.1: Headlamp and its accessories, highlighting the 1200mAh battery capacity.
2.3 Controls and Indicators
Image 2.2: Detailed view of the headlamp's controls and features.
- Power/Mode Button: Controls power and cycles through white light modes.
- Sensor Button: Activates/deactivates motion sensor control.
- Motion Sensors: Detects hand gestures for hands-free operation.
- White Light LED: Main illumination source.
- Red Light LEDs: Provides low-impact illumination, ideal for night vision preservation.
- USB Charging Port: For recharging the internal battery.
- Power Indicator: Displays battery status.
3. Setup
3.1 Initial Charge
- Before first use, fully charge the headlamp.
- Connect the supplied USB charging cable to the headlamp's USB charging port.
- Plug the other end of the cable into a standard USB power source (e.g., computer, wall adapter).
- The power indicator will show charging status (e.g., red for charging, green for fully charged).
- A full charge typically takes approximately 3 hours.
3.2 Adjusting the Headband
Image 3.1: The adjustable and comfortable elastic headband.
- Place the headlamp on your head.
- Adjust the elastic strap using the buckles on either side to achieve a snug yet comfortable fit.
- The headlamp unit can be tilted up to 60 degrees to direct the light beam as needed.
4. Operating Instructions
4.1 Power On/Off and Light Modes
- To Turn On: Press the Power/Mode button once. The headlamp will activate in the last used white light mode.
- To Change White Light Modes: Press the Power/Mode button repeatedly to cycle through High White Light, Low White Light, and SOS White Light.
- To Activate Red Light: From any white light mode, press and hold the Power/Mode button for approximately 2 seconds. The headlamp will switch to Red Light mode.
- To Change Red Light Modes: In Red Light mode, press the Power/Mode button once to switch between steady Red Light and Red Strobe.
- To Turn Off: Press the Power/Mode button until the light turns off, or press and hold the Power/Mode button for 2 seconds from any mode.
Image 4.1: The headlamp providing 650 lumens of illumination in a dark environment.
4.2 Motion Sensor Control
The motion sensor allows for convenient hands-free operation, ideal when your hands are occupied.
- To Activate Sensor Mode: With the headlamp on, press the Sensor button once. The sensor indicator light will illuminate.
- To Use Sensor Control: Wave your hand approximately 4-10 cm (1.5-4 inches) in front of the headlamp to turn the light on or off.
- To Deactivate Sensor Mode: Press the Sensor button again. The sensor indicator light will turn off.
Image 4.2: Demonstrating motion sensor use for hands-free operation.
5. Maintenance
5.1 Cleaning
- Wipe the headlamp body with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Ensure the USB charging port cover is securely closed to maintain water resistance.
5.2 Battery Care
- To prolong battery life, recharge the headlamp regularly, even if not used frequently.
- Avoid completely draining the battery before recharging.
- Store the headlamp in a cool, dry place when not in use.
5.3 Storage
- Store the headlamp in its provided case to protect it from dust and physical damage.
- Keep out of direct sunlight and extreme temperatures.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Headlamp does not turn on. | Low battery. | Charge the headlamp fully. |
| Light is dim or flickers. | Low battery. | Recharge the headlamp. |
| Motion sensor not responding. | Sensor mode not activated. Obstruction in front of sensor. | Ensure sensor mode is active (indicator light on). Clear any obstructions. Ensure hand is within 4-10 cm range. |
| Headlamp not charging. | Faulty cable or power source. | Try a different USB cable or power adapter. Ensure cable is securely connected. |
7. Specifications
| Feature | Detail |
|---|---|
| Model | H6 Pro |
| Brightness (White Light) | 650 Lumens |
| Beam Distance | Up to 126 meters (413 feet) |
| Battery Type | Built-in 1200mAh Lithium-Ion |
| Runtime (White Light High) | Approx. 2.5 hours |
| Runtime (White Light Low) | Approx. 6.5 hours |
| Runtime (Red Light) | Up to 20 hours |
| Charging Time | Approx. 3 hours |
| Water Resistance | IPX4 (Splash-proof) |
| Weight | 72g (2.5 oz) |
| Material | Plastic |
| Dimensions | 3.15"D x 2.37"W x 0.79"H |
Image 7.1: The headlamp's IPX4 water resistance.
8. Warranty and Support
8.1 Warranty Information
The Everbeam H6 Pro LED Headlamp comes with a 2-year warranty from the date of purchase. This warranty covers manufacturing defects and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.
8.2 Customer Support
For technical assistance, warranty claims, or any questions regarding your Everbeam H6 Pro Headlamp, please contact Everbeam customer support through the retailer's platform or the official Everbeam website. Please have your purchase receipt and product model number (H6 Pro) available when contacting support.
