Hyper Tough 500-Lumen Corded Work Light User Manual

Introduction

Thank you for choosing the Hyper Tough 500-Lumen Corded Work Light. This manual provides important information regarding the safe operation, setup, maintenance, and troubleshooting of your new work light. Please read this manual thoroughly before use and retain it for future reference.

Safety Information

Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and personal injury.

• Do not expose the work light to rain or wet conditions. This product is not water resistant.
• Do not operate the work light if the cord or plug is damaged.
• Ensure the power outlet used is properly grounded.
• Do not look directly into the light source when illuminated.
• Keep children and pets away from the work area.
• Unplug the work light from the power source before cleaning or performing any maintenance.

Setup

The Hyper Tough 500-Lumen Corded Work Light is designed for easy setup and versatile placement.

1. Unpack: Carefully remove the work light and its cord from the packaging.
2. Positioning:
   • Magnetic Base: The strong magnet on the base allows attachment to any metal surface for hands-free operation.
   • Swivel Hook: Utilize the 360-degree swivel hook to hang the light from overhead structures, pipes, or other suitable supports.
   • Flat Surface: The light can also be placed on a flat surface.
3. Power Connection: Extend the 6-foot power cord fully. Plug the cord into a standard, grounded 120V AC electrical outlet.

Image: The Hyper Tough 500-Lumen Corded Work Light demonstrating its swivel hook and overall design.

Operating Instructions

Using your Hyper Tough work light is straightforward.

1. Turning On/Off: Locate the power switch on the side of the light. Press the switch to turn the light ON. Press it again to turn the light OFF.
2. Using the Integrated Outlet: The work light features a grounded 8-amp outlet on the bottom. This allows you to connect other tools or devices directly to the work light, extending your power access in the work area. Ensure the total current draw of connected devices does not exceed 8 amps.
3. Adjusting Position: Utilize the 360-degree swivel hook and strong magnetic base to adjust the light's angle and position as needed for optimal illumination of your workspace.

Maintenance

Proper maintenance ensures the longevity and performance of your work light.

• Cleaning: Disconnect the work light from the power source before cleaning. Wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• Storage: When not in use, store the work light in a dry, cool place, away from direct sunlight and moisture. Coil the power cord neatly to prevent tangling and damage.
• Inspection: Periodically inspect the power cord and plug for any signs of damage. If damage is found, discontinue use and have it repaired by a qualified professional.

Troubleshooting

Specifications

• Brand: Hyper Tough
• Model: 500-Lumen Corded Work Light (ASIN: B07PDHG3PJ)
• Lumen Output: 500 Lumens
• Cord Length: 6 Feet
• Integrated Outlet: Grounded 8 Amp
• Mounting Options: Strong Magnet, 360-degree Swivel Hook, Surface Mount
• Material: Plastic
• Water Resistance Level: Not Water Resistant
• UPC: 681131220361
• Batteries Required: No

Warranty Information

For specific warranty details, please refer to the warranty card included with your product or visit the official Hyper Tough website. Keep your purchase receipt as proof of purchase for any warranty claims.

Support

If you have any questions or require assistance with your Hyper Tough 500-Lumen Corded Work Light, please contact Hyper Tough customer support. Contact information can typically be found on the product packaging or the official brand website.

Note: This manual is for informational purposes only. Product specifications and features are subject to change without notice.