Introduction
This manual provides essential information for the setup, operation, and maintenance of your Vivanco RR Z 160 Philips Remote Control. Designed for Philips TVs, this remote offers straightforward functionality without the need for complex programming.
Setup
Battery Installation
- Locate the battery compartment on the back of the remote control.
- Slide open the battery compartment cover.
- Insert two (2) AA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Close the battery compartment cover securely.
Note: Batteries are not included with the remote control. Always use new batteries of the same type.
Initial Use (No Programming Required)
The Vivanco RR Z 160 remote control is pre-programmed for Philips TVs and does not require any setup or code entry. Once batteries are installed, it is ready for immediate use with compatible Philips television sets.
Figure 1: Front view of the Vivanco RR Z 160 remote control, showing its button layout including power, number keys, channel, volume, and navigation buttons.
Operating Instructions
This section describes the primary functions of the buttons on your Vivanco remote control.
| Button | Function |
|---|---|
| Power (Red Button) | Turns the television on or off. |
| 0-9 (Number Buttons) | Directly select TV channels. |
| P+ / P- (Channel Up/Down) | Changes the television channel up or down. |
| Vol+ / Vol- (Volume Up/Down) | Adjusts the television volume up or down. |
| Mute | Mutes or unmutes the television sound. |
| MENU | Accesses the television's main menu. |
| GUIDE | Displays the electronic program guide (EPG). |
| BACK | Returns to the previous screen or menu. |
| OK | Confirms a selection or enters a menu item. |
| Directional Arrows (Up, Down, Left, Right) | Navigates through menus and options. |
| AV | Switches between input sources (e.g., HDMI, AV). |
| EXIT | Exits the current menu or function. |
Maintenance
Cleaning the Remote Control
- Use a soft, dry cloth to wipe the surface of the remote control.
- For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaner. Do not spray cleaner directly onto the remote.
- Avoid using harsh chemicals, solvents, or abrasive cleaning materials, as these can damage the remote's finish or internal components.
Battery Replacement
Replace batteries when the remote control's response becomes sluggish or it stops functioning. Refer to the "Battery Installation" section under "Setup" for detailed instructions.
- Always replace both batteries at the same time.
- Do not mix old and new batteries, or different types of batteries.
- Dispose of used batteries responsibly according to local regulations.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote control not working. | Dead or incorrectly inserted batteries. | Replace batteries with new ones, ensuring correct polarity (+/-). |
| Remote control range is poor. | Weak batteries; Obstruction between remote and TV; Infrared sensor on TV is blocked. | Replace batteries. Ensure a clear line of sight to the TV's infrared sensor. Remove any obstructions. |
| Certain buttons do not respond. | Button stuck or dirty; Remote control malfunction. | Clean around the unresponsive button. If problem persists, the remote may be faulty. |
| Remote works for some functions but not others. | Compatibility issue (less likely for this model); TV settings. | Ensure your TV is a Philips model. Check TV settings for remote control input. |
Specifications
- Brand: Vivanco
- Model Name: RR Z 160
- Model Number: 39287
- Compatible Devices: Philips Television
- Connectivity Technology: Infrared
- Number of Buttons: 20
- Maximum Range: 10 Metres
- Power Source: 2 x AA Batteries (not included)
- Product Dimensions: 15 x 5 x 2 cm
- Item Weight: 65 Grams
- Color: Black
Warranty and Support
Warranty Information
Vivanco products are manufactured to high quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official Vivanco website. Keep your proof of purchase for warranty claims.
Customer Support
If you encounter issues not covered in this manual or require further assistance, please contact Vivanco customer support. Contact details can typically be found on the product packaging, the official Vivanco website, or through your retailer.
When contacting support, please have your product model name (RR Z 160) and model number (39287) ready.
