Introduction
The PERLESMITH Fixed TV Wall Mount Bracket (Model PSML1) is designed to securely mount most 26-60 inch LED, LCD, OLED-4K Flat Screen TVs weighing up to 115 lbs. Its ultra-slim, low-profile design allows your TV to sit just 1.18 inches from the wall, saving space and enhancing your home or office decor. This manual provides comprehensive instructions for safe and efficient installation, operation, and maintenance of your TV wall mount.
Figure 1: PERLESMITH Fixed TV Wall Mount Bracket (Model PSML1)
Safety Information
WARNING: Do not begin installation until you have read and understood all the instructions and warnings contained in this installation sheet. If you have any questions regarding any of the instructions or warnings, please contact your local distributor for assistance. This product is designed to be installed on wood stud walls, solid concrete walls, or brick walls. Do not install on drywall alone. Ensure the mounting surface will safely support the combined weight of the equipment and all attached hardware. Always use a stud finder to locate wood studs. Always use appropriate safety gear and tools for installation.
Setup & Installation
Pre-Installation Checks
- TV Compatibility: This mount fits most 26-60 inch TVs. Verify your TV's VESA pattern (mounting hole spacing) is compatible with 75x75mm, 100x100mm, 200x100mm, 200x200mm, 300x200mm, 300x300mm, 400x200mm, 400x300mm, or 400x400mm.
- Weight Capacity: Ensure your TV weighs no more than 115 lbs (52 kg).
- Wall Type: This mount is designed for installation on wood studs (16-inch spacing), solid concrete, or brick walls. DO NOT install on drywall alone.
Figure 2: VESA Compatibility and Weight Capacity. This mount supports TVs from 26 to 60 inches and up to 115 lbs.
Figure 3: Supported Wall Types. Ensure your wall is suitable for mounting.
Figure 4: Locate and measure your TV's VESA mounting holes.
Installation Steps
The PERLESMITH wall mount features an easy 3-step installation process. All necessary screws and hardware are included.
Figure 5: Overview of the simple 3-step installation.
- Attach TV Brackets: Secure the vertical TV brackets to the back of your television using the appropriate screws and washers. Ensure the brackets are oriented correctly (arrows facing upwards).
- Mount Wall Plate: Mark the desired mounting height on your wall. For wood studs, use a stud finder to locate the center of the studs and drill pilot holes. For concrete/brick, use a masonry drill bit and anchors. Secure the wall plate to the wall using the provided lag bolts and washers.
- Hang TV: Carefully lift the TV and hook the TV brackets onto the wall plate. Ensure the TV is centered and level. Use the safety screws at the bottom of the TV brackets to prevent the TV from accidental movement or dislodging.
Video 1: This video provides a visual overview of the PERLESMITH Fixed TV Wall Mount Bracket and its features, including installation steps.
Figure 6: The mount is built with durable, sturdy stainless steel and features secure dual hooks to support TVs up to 115 lbs.
Figure 7: Utilize the safety lock mechanism to secure the TV to the wall plate.
Operating
The PERLESMITH PSML1 is a fixed TV wall mount, meaning once installed, your TV will remain in a static position. This low-profile design positions your TV close to the wall for a sleek, modern appearance.
Figure 8: The ultra-slim design keeps your TV close to the wall for a clean look.
Maintenance
- Cleaning: Dust the mount and TV regularly with a soft, dry cloth. Avoid harsh chemicals or abrasive cleaners.
- Periodic Checks: Periodically check all screws and connections to ensure they remain tight and secure. Do not overtighten.
- Safety: Ensure children and pets are kept away from the mounted TV to prevent accidental damage or injury.
Figure 9: Position the TV mount at a safe height to keep it out of reach of children and pets.
Troubleshooting
- TV Not Level: If the TV appears unlevel after installation, carefully adjust the TV on the wall plate until it is level. Re-tighten any securing screws if necessary.
- Mount Feels Loose: Re-check all wall plate and TV bracket screws. Ensure they are securely fastened to the wall studs/anchors and the TV. If the issue persists, consult a professional installer.
- Missing Parts: If any parts are missing from your package, please contact PERLESMITH customer support immediately.
Specifications
| Feature | Specification |
|---|---|
| Brand | PERLESMITH |
| Model Number | PSML1 |
| Mounting Type | Wall Mount |
| Movement Type | Fixed |
| Compatible TV Sizes | 26-60 Inches |
| Max Weight Capacity | 115 lbs (52 kg) |
| VESA Compatibility | 75x75mm, 100x100mm, 200x100mm, 200x200mm, 300x200mm, 300x300mm, 400x200mm, 400x300mm, 400x400mm |
| Distance from Wall | 1.18 Inches |
| Material | Alloy Steel |
| Color | Black |
| Item Weight | 2.44 pounds |
| UPC | 728370350678 |
Warranty & Support
All PERLESMITH products are made of the highest quality materials and are backed by a 10-year manufacturer's service warranty. If you have any questions or require assistance, please feel free to contact us at any time.
For a detailed PDF version of the user manual, please refer to the official document: User Manual (PDF)
