ResMed AirFit N30i Standard Frame

Download PDF
Contents

ResMed AirFit N30i Standard Frame User Manual

For Nasal CPAP Mask - Replacement CPAP Accessories

1. Introduction

This manual provides essential information for the proper use, setup, maintenance, and care of your ResMed AirFit N30i Standard Frame. The AirFit N30i frame system is designed to optimize your CPAP therapy experience, offering comfort and flexibility with its innovative tube-up design.

ResMed AirFit N30i Standard Frame

Image 1.1: ResMed AirFit N30i Standard Frame, showing the complete frame system with nasal cradle cushion and elbow.

QuietAir Technology and tube-up design

Image 1.2: The AirFit N30i frame system highlighting QuietAir Technology and the tube-up design for an unobstructed view.

2. Components

The ResMed AirFit N30i Standard Frame system includes the following components:

  • Frame: The flexible frame that wraps around the head.
  • Elbow: The connector piece that attaches the CPAP tubing to the frame.
  • Nasal Cradle Cushion: The soft cushion that rests under the nose. (Note: Headgear is not included with this frame system.)
Exploded view of AirFit N30i components

Image 2.1: Exploded view showing the frame, elbow, and nasal cradle cushion components of the AirFit N30i system.

3. Setup

Follow these steps to set up your AirFit N30i Standard Frame:

  1. Assemble Components: Connect the nasal cradle cushion to the frame. Ensure it clicks securely into place. Attach the elbow to the top of the frame.
  2. Attach Headgear (Sold Separately): If you are using headgear, thread it through the designated slots on the frame. Adjust for a comfortable, secure fit.
  3. Connect to CPAP Tubing: Connect your CPAP machine's air tubing to the elbow at the top of the frame.
  4. Check Sizing: Before use, ensure you have the correct cushion and frame size for optimal therapy. The frame is a standard size, and the cushion should be chosen based on your facial measurements.
Checking cushion and frame size

Image 3.1: Illustration demonstrating how to check the cushion and frame size for proper fit.

4. Operating (Usage)

The AirFit N30i frame system is designed for ease of use and freedom of movement during sleep therapy.

  • Top-of-Head Tubing: The tubing connection at the top of your head keeps the air tube out of your way, allowing you to comfortably switch sleeping positions throughout the night.
  • QuietAir Technology: The integrated QuietAir technology in the elbow is designed to diffuse exhaled air, minimizing noise for a quieter sleep experience for both you and your bed partner.
  • Under-Nose Cushion: The nasal cradle cushion rests comfortably under your nose, providing a clear field of vision for reading or watching TV before sleep.
Man wearing AirFit N30i mask showing freedom of movement

Image 4.1: A person demonstrating the freedom of movement provided by the top-of-head tubing design of the AirFit N30i mask.

5. Maintenance

Daily Care

To maintain hygiene and performance, follow these daily care instructions for your AirFit N30i frame system:

  • Wipe the outside of the foam with CPAP wipes or similar alcohol-free wipes.
  • Lay flat on a towel to air dry.

Important:

  • Do not expose to direct sunlight.
  • Do not put in a dishwasher or washing machine.
  • Do not use alcohol or bleach to clean.
Daily care instructions for AirFit frame system

Image 5.1: Visual guide for daily care of the AirFit frame system, indicating what to do and what to avoid.

Replacement Schedule

We recommend replacing your frame system every 3 months to ensure optimal performance and hygiene. Replace immediately at the first signs of deterioration.

Signs it might be time to replace your frame system:

  • You are experiencing excessive leaks.
  • Your therapy feels less effective than usual.
  • Your frame system starts to show wear and tear (e.g., cracks, discoloration, loss of elasticity).
Replacement tip for AirFit frame system

Image 5.2: Reminder to replace the frame system every 3 months and signs indicating replacement is needed.

6. Troubleshooting

If you encounter issues with your AirFit N30i Standard Frame, consider the following common solutions:

ProblemPossible CauseSolution
Air leaks around cushionImproper fit, worn cushion, or incorrect size.Readjust the frame and headgear. Check cushion for damage and replace if necessary. Ensure correct cushion size.
Discomfort or pressure marksMask is too tight or improperly positioned.Loosen headgear straps slightly. Reposition the frame and cushion on your face.
Mask feels unstableHeadgear too loose or frame not seated correctly.Tighten headgear straps slightly. Ensure the frame is properly aligned on your head.
Excessive noiseAir leaks, blocked vent, or worn elbow.Check for leaks and adjust fit. Ensure the QuietAir vent is clear. Replace elbow if damaged.

If problems persist, consult your healthcare provider or CPAP equipment supplier.

7. Specifications

  • Product Dimensions: 10.67 x 10.63 x 1.73 inches
  • Product Weight: 3.53 ounces
  • Manufacturer: ResMed
  • Model: AirFit N30i Standard Frame
  • ASIN: B07P6F7587
  • Date First Available: February 25, 2019

8. Warranty and Support

For information regarding the product warranty, technical support, or to purchase replacement parts, please refer to the official ResMed website or contact your authorized ResMed dealer. Keep your purchase receipt as proof of purchase for warranty claims.

ResMed Contact Information: Please visit www.resmed.com for the most current support and contact details.

© 2025 ResMed. All rights reserved. Information subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.