ResMed 63804

Download PDF
Contents

ResMed AirFit N30i Standard Frame System

User Manual - Model: 63804

Product Overview

The ResMed AirFit N30i Standard Frame System is designed to provide comfort and convenience for CPAP therapy users. This system includes the frame, elbow, and nasal cradle cushion, serving as a direct replacement for components of the AirFit N30i nasal CPAP mask. Please note that headgear is not included with this system.

Key features of the AirFit N30i Standard Frame System include:

  • Tube-Up Design: Allows for greater freedom of movement and sleeping in various positions without hose interference.
  • Soft, Flexible Silicone Cushion: Designed for a comfortable fit and effective seal.
  • QuietAir Diffused Venting: Minimizes noise for a quieter sleep environment for both the user and their bed partner.
  • Easy Replacement: Components are designed for straightforward replacement as needed.

Setup and Assembly

Proper setup of your AirFit N30i Standard Frame System is crucial for effective and comfortable CPAP therapy. Follow these steps to assemble and prepare your mask.

1. Check Your Size

Image showing how to check the size of the nasal cradle cushion and frame system using a sizing guide.

This image illustrates how to verify the correct size for both the nasal cradle cushion and the frame system. Ensure your cushion size (e.g., Medium) matches the frame for an optimal fit.

The AirFit N30i system comes with a medium nasal cradle cushion. It is important to ensure that the cushion and frame size are appropriate for your facial structure to achieve a proper seal and maximize comfort. Refer to the sizing guide provided with your complete CPAP mask system or consult your healthcare provider if you are unsure about your size.

2. Assembling the Frame System

Diagram showing the components of the AirFit N30i Frame System without headgear, highlighting the tube-up design.

This diagram shows the AirFit N30i Frame System, emphasizing its tube-up design which allows for greater freedom of movement during sleep.

  1. Connect the nasal cradle cushion to the frame. Ensure it clicks securely into place.
  2. Attach the elbow to the top of the frame. The elbow swivels to allow for hose connection from any direction.
  3. If you are replacing an existing frame system, detach your headgear from the old frame and reattach it to the new frame. The headgear is sold separately and is essential for securing the mask.

Operating Instructions

Once assembled, the AirFit N30i Standard Frame System is ready for use with your CPAP machine. Follow these guidelines for proper application and comfortable wear.

Wearing Your Mask

A person wearing the ResMed AirFit N30i mask, demonstrating the top-of-head tubing for freedom of movement.

This image shows a user comfortably wearing the AirFit N30i mask, highlighting how the top-of-head tubing allows for unrestricted movement during sleep.

  1. Hold the nasal cradle cushion against your nose.
  2. Pull the headgear over your head, positioning the top-of-head tubing over the crown of your head.
  3. Adjust the side straps of the headgear to achieve a snug but comfortable fit. Avoid overtightening, as this can cause discomfort and leaks.
  4. Connect the CPAP hose to the elbow at the top of the mask.
  5. Turn on your CPAP machine and check for any air leaks around the cushion. Gently adjust the mask or headgear straps if necessary to minimize leaks.

The unique tube-up design of the AirFit N30i allows you to sleep in various positions, including on your side or stomach, without the hose getting in the way. This design promotes greater freedom of movement and a more natural sleep experience.

Care and Maintenance

Regular cleaning and proper maintenance extend the life of your AirFit N30i Standard Frame System and ensure hygienic therapy.

Daily Care

Infographic detailing daily care instructions for the AirFit frame system, including what to do and what to avoid.

This image provides a quick guide for daily care of your AirFit frame system, listing recommended actions and things to avoid.

  • Clean Daily: Disassemble the cushion and elbow from the frame. Wash the cushion and elbow in warm water with mild soap.
  • Rinse Thoroughly: Rinse all components thoroughly under running water to remove any soap residue.
  • Air Dry: Lay components flat on a clean towel to air dry completely before reassembly or next use.
  • Wipe Frame: If required, wipe the outside of the frame with CPAP wipes or similar alcohol-free wipes.

Important:

  • ✘ Do not expose to direct sunlight.
  • ✘ Do not put in dishwasher or washing machine.
  • ✘ Do not use alcohol or bleach to clean.

Replacement Schedule

Diagram showing the AirFit frame system with a recommendation to replace it every 3 months, along with signs of wear.

This image advises replacing your frame system every 3 months and lists signs indicating it's time for replacement.

We recommend replacing your frame system every 3 months to ensure optimal performance and hygiene. Signs it might be time to replace your frame system include:

  • You are experiencing excessive leaks that cannot be resolved with adjustments.
  • Your therapy feels less effective than usual.
  • The frame system starts to show visible wear and tear, such as cracks, discoloration, or loss of elasticity.

Troubleshooting

If you encounter issues with your AirFit N30i Standard Frame System, refer to the common problems and solutions below.

ProblemPossible CauseSolution
Air leaks around the cushionIncorrect size, improper fit, worn-out cushion.Ensure correct cushion size. Adjust headgear straps for a snug fit. Replace cushion if worn or damaged.
Discomfort or pressure marksHeadgear too tight, incorrect cushion size, improper positioning.Loosen headgear straps slightly. Reposition the mask on your face. Verify cushion size.
Mask feels unstableHeadgear too loose, improper fit.Tighten headgear straps slightly. Ensure the frame is correctly positioned on your head.
Difficulty connecting hose to elbowElbow not fully inserted or misaligned.Ensure the elbow is pushed firmly into the top of the frame until it clicks.

If problems persist, consult your healthcare provider or CPAP equipment supplier for further assistance.

Specifications

AttributeDetail
Product NameResMed AirFit N30i Standard Frame System, Elbow & Nasal Cradle Cushion
Model Number63804
BrandResMed
Product Dimensions13.62 x 10.08 x 1.61 inches
Item Weight5.12 ounces
Cushion TypeNasal Cradle Cushion (Medium)
Pillow TypeHammock Pillow
ShapeOval
Special FeaturePortable
ManufacturerResMed

Warranty and Support

For detailed warranty information regarding your ResMed AirFit N30i Standard Frame System, please refer to the official ResMed website or the documentation provided with your complete CPAP mask system at the time of purchase. Warranty terms and conditions may vary.

Legal Disclaimer: Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition. This product is a medical device and should be used as prescribed by a healthcare professional.

For technical support, product inquiries, or assistance with replacement parts, please contact ResMed customer service or your authorized ResMed dealer. You can typically find contact information on the official ResMed website or on your product packaging.

Note: A prescription is required for the complete CPAP Nasal Mask system. This product is a replacement part.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.